IOS Deploy Usb

iOS USB Deploy

Overview

Builds an iOS app using xcodebuild and installs it directly to a USB-connected iPhone. This is the fastest way to test on real hardware during development, taking only 8-10 seconds vs TestFlight's longer review process.

When to Use

Invoke this skill when the user:

• Asks to "deploy to iPhone"
• Wants to "install the app on device"
• Says "build and deploy"
• Mentions testing on physical iPhone
• Wants to "push to device"

Prerequisites

• iPhone connected via USB
• Device trusted (user tapped "Trust This Computer" on iPhone)
• Developer Mode enabled (Settings → Privacy & Security → Developer Mode)
• Valid code signing identity configured
• The project must be in an iOS app directory with .xcodeproj

Instructions

1. Navigate to the iOS app directory (look for .xcodeproj file):

   cd path/to/ios/app
   

2. Run the install-device.sh script:

   ./install-device.sh
   

3. The script will:

   • Auto-detect the connected iPhone
   • Build the app with xcodebuild (using LD="clang" workaround)
   • Install the .app to the device
   • Report success

4. After successful installation, automatically start the app:

   ./restart-app.sh
   

5. Inform the user:

   • The build typically takes 8-10 seconds
   • The app will be automatically launched on the iPhone
   • If errors occur, check that iPhone is properly connected and trusted

Expected Output

📱 Installing NoobTest directly to connected device...
✅ Found device: ashphone16
   Device ID: 00008140-0001684124A2201C
🔨 Building...
✅ Build complete
📲 Installing to device...
🎉 Installation complete!
🔄 Restarting NoobTest on device...
✅ App restarted
The app is now running on your iPhone.

Common Issues

No device detected:

• Check USB connection
• Ensure "Trust This Computer" was accepted on iPhone
• Enable Developer Mode in Settings
• Try disconnecting and reconnecting

Build fails with linker error:

• Script uses LD="clang" to avoid Homebrew linker conflicts
• This is automatically handled

Script hangs during build or install:

• Most common cause: VPN is enabled on the Mac
• If the install-device.sh script hangs and doesn't complete:
  1. Ask the user: "Is your VPN currently enabled? If so, please disable it and try again."
  2. Wait for user to disable VPN
  3. Retry the deployment
• This happens because VPN can interfere with USB device communication
• After disabling VPN, the deployment should complete normally

Implementation Details

The script:

• Uses xcodebuild -showdestinations to find the device ID
• Builds with -allowProvisioningUpdates for automatic code signing
• Finds the built .app in DerivedData by modification time
• Uses xcrun devicectl device install app to deploy

Platform-Specific Notes

This is an iOS-specific skill. For Android deployment, use the android-deploy-usb skill.