Orcaflex Line Wizard

OrcaFlex Line Wizard Skill

Configure OrcaFlex lines and use the Line Setup Wizard for automated tension and length calculations.

Version Metadata

version: 1.0.0
python_min_version: '3.10'
dependencies:
  orcaflex-modeling: '>=2.0.0,<3.0.0'
orcaflex_version: '>=11.0'
compatibility:
  tested_python:
  - '3.10'
  - '3.11'
  - '3.12'
  - '3.13'
  os:
  - Windows
  - Linux
  - macOS

Changelog

[1.0.0] - 2026-01-17

Added:

• Initial release with Line Setup Wizard integration
• Target tension and length calculation modes
• Multi-line configuration support

When to Use

• Setting up mooring lines with target pretensions
• Configuring riser lines with specified top tensions
• Calculating line lengths for given tension targets
• Calculating tensions for given line lengths
• Multi-line mooring system configuration
• Initial model setup before detailed analysis

OrcaFlex Line Setup Wizard

The Line Setup Wizard is an OrcaFlex built-in tool that automatically calculates:

• Line lengths to achieve target tensions
• Tensions for specified line lengths

Calculation Modes

Python API

Basic Line Setup

import OrcFxAPI

# Load model
model = OrcFxAPI.Model("mooring_model.dat")

# Configure Line Setup Wizard
model.general.LineSetupCalculationMode = "Calculate line lengths"
model.general.LineSetupMaxDamping = 20  # For numerical stability

# Configure line 1 for target tension
line1 = model["Mooring_Line_1"]
line1.LineSetupTargetVariable = "Tension"
line1.LineSetupLineEnd = "End A"          # Measure tension at End A
line1.LineSetupTargetValue = 800.0        # Target 800 kN

# Configure line 2 similarly
line2 = model["Mooring_Line_2"]
line2.LineSetupTargetVariable = "Tension"
line2.LineSetupLineEnd = "End A"
line2.LineSetupTargetValue = 800.0

# Exclude line 3 from wizard (keep current configuration)
line3 = model["Mooring_Line_3"]
line3.LineSetupIncluded = "No"

# Run the wizard
model.InvokeLineSetupWizard()

# The model now has adjusted line lengths
# Save the result
model.SaveData("mooring_model_adjusted.dat")

Comprehensive Line Configuration

import OrcFxAPI
from dataclasses import dataclass
from typing import List, Optional

@dataclass
class LineSetupConfig:
    """Configuration for a line in the setup wizard."""
    name: str
    target_variable: str = "Tension"  # "Tension" or "Length"
    line_end: str = "End A"           # "End A" or "End B"
    target_value: float = 0.0         # kN for tension, m for length
    included: bool = True


def configure_line_setup(
    model: OrcFxAPI.Model,
    configs: List[LineSetupConfig],
    calculation_mode: str = "Calculate line lengths",
    max_damping: float = 20.0
) -> dict:
    """
    Configure and run the Line Setup Wizard.

    Args:
        model: OrcaFlex model
        configs: List of line configurations
        calculation_mode: "Calculate line lengths" or "Calculate tensions"
        max_damping: Maximum damping for solver

    Returns:
        Dictionary with results for each line
    """
    # Store original values
    original_lengths = {}
    original_tensions = {}

    # Configure wizard
    model.general.LineSetupCalculationMode = calculation_mode
    model.general.LineSetupMaxDamping = max_damping

    # Configure each line
    for config in configs:
        line = model[config.name]

        # Store original
        original_lengths[config.name] = list(line.Length)

        if config.included:
            line.LineSetupIncluded = "Yes"
            line.LineSetupTargetVariable = config.target_variable
            line.LineSetupLineEnd = config.line_end
            line.LineSetupTargetValue = config.target_value
        else:
            line.LineSetupIncluded = "No"

    # Run wizard
    model.InvokeLineSetupWizard()

    # Collect results
    results = {}
    for config in configs:
        line = model[config.name]

        # Get new lengths
        new_lengths = list(line.Length)

        # Calculate statics to get tensions
        model.CalculateStatics()

        results[config.name] = {
            "original_lengths": original_lengths[config.name],
            "new_lengths": new_lengths,
            "length_change": sum(new_lengths) - sum(original_lengths[config.name]),
            "target_value": config.target_value,
            "included": config.included
        }

    return results


# Example usage
configs = [
    LineSetupConfig(
        name="Mooring_Line_1",
        target_variable="Tension",
        line_end="End A",
        target_value=800.0,
        included=True
    ),
    LineSetupConfig(
        name="Mooring_Line_2",
        target_variable="Tension",
        line_end="End A",
        target_value=850.0,
        included=True
    ),
    LineSetupConfig(
        name="Riser_1",
        included=False  # Exclude from wizard
    )
]

model = OrcFxAPI.Model("model.dat")
results = configure_line_setup(model, configs)

for line_name, result in results.items():
    if result["included"]:
        print(f"{line_name}:")
        print(f"  Target: {result['target_value']} kN")
        print(f"  Length change: {result['length_change']:.2f} m")

Line Section Configuration

def configure_line_sections(
    model: OrcFxAPI.Model,
    line_name: str,
    sections: list
) -> None:
    """
    Configure line sections with multiple line types.

    Args:
        model: OrcaFlex model
        line_name: Name of the line
        sections: List of section configurations

    Example sections:
        [
            {"LineType": "Chain_84mm", "Length": 50.0, "TargetSegmentLength": 5.0},
            {"LineType": "Wire_76mm", "Length": 200.0, "TargetSegmentLength": 10.0},
            {"LineType": "Chain_84mm", "Length": 50.0, "TargetSegmentLength": 5.0}
        ]
    """
    line = model[line_name]

    # Set number of sections
    line.NumberOfSections = len(sections)

    # Configure each section
    for i, section in enumerate(sections):
        line.LineType[i] = section["LineType"]
        line.Length[i] = section["Length"]
        line.TargetSegmentLength[i] = section.get("TargetSegmentLength", 10.0)


# Example: Configure a typical mooring line
sections = [
    {"LineType": "Chain_R4_84mm", "Length": 50.0, "TargetSegmentLength": 5.0},
    {"LineType": "Polyester_Rope", "Length": 800.0, "TargetSegmentLength": 20.0},
    {"LineType": "Chain_R4_84mm", "Length": 50.0, "TargetSegmentLength": 5.0}
]

configure_line_sections(model, "Mooring_Line_1", sections)

Configuration Examples

YAML-Based Line Setup

# configs/line_setup.yml

line_setup:
  calculation_mode: "Calculate line lengths"
  max_damping: 50

  lines:
    - name: "Mooring_Leg_1"
      target_variable: "Tension"
      line_end: "End A"
      target_value: 500.0      # kN
      included: true

    - name: "Mooring_Leg_2"
      target_variable: "Tension"
      line_end: "End A"
      target_value: 500.0
      included: true

    - name: "Mooring_Leg_3"
      target_variable: "Tension"
      line_end: "End A"
      target_value: 500.0
      included: true

    - name: "Mooring_Leg_4"
      target_variable: "Tension"
      line_end: "End A"
      target_value: 500.0
      included: true

Multi-Segment Line Configuration

# configs/line_sections.yml

lines:
  - name: "Catenary_Mooring_1"
    sections:
      - line_type: "Chain_R4_84mm"
        length: 80.0
        segment_length: 4.0

      - line_type: "Polyester_128mm"
        length: 1200.0
        segment_length: 25.0

      - line_type: "Chain_R4_84mm"
        length: 200.0
        segment_length: 5.0

    end_a:
      connection: "Vessel"
      object: "FPSO"
      position: [-150, 0, -20]

    end_b:
      connection: "Anchored"
      position: [-1800, 0, -1500]

Line Properties Reference

Common Line Setup Properties

Line Type Properties

Best Practices

Before Using Line Setup Wizard

1. Verify model loads correctly
2. Check all line connections
3. Ensure valid line types
4. Set reasonable initial lengths

Damping Settings

Target Values

1. Use realistic tensions based on design requirements
2. Consider environmental loads in final tension targets
3. Account for line weight in water
4. Check against breaking loads

Error Handling

Common Issues

try:
    model.InvokeLineSetupWizard()
except OrcFxAPI.OrcaFlexError as e:
    error_msg = str(e)

    if "did not converge" in error_msg.lower():
        print("Wizard failed to converge")
        print("Try:")
        print("  - Increase MaxDamping")
        print("  - Check target values are achievable")
        print("  - Verify line lengths are reasonable")

    elif "line" in error_msg.lower() and "not found" in error_msg.lower():
        print("Line not found - check line names")

    else:
        print(f"Error: {e}")

Validation After Wizard

def validate_wizard_results(model, configs):
    """Validate that wizard achieved targets."""
    model.CalculateStatics()

    validation = {"passed": True, "results": []}

    for config in configs:
        if not config.included:
            continue

        line = model[config.name]

        # Get actual tension at specified end
        if config.line_end == "End A":
            actual = line.StaticResult("Effective Tension", OrcFxAPI.oeEndA)
        else:
            actual = line.StaticResult("Effective Tension", OrcFxAPI.oeEndB)

        target = config.target_value
        error_pct = abs(actual - target) / target * 100

        result = {
            "line": config.name,
            "target": target,
            "actual": actual,
            "error_pct": error_pct,
            "passed": error_pct < 1.0  # 1% tolerance
        }

        validation["results"].append(result)

        if not result["passed"]:
            validation["passed"] = False

    return validation

Integration with Other Skills

With Mooring Iteration

# Use Line Setup Wizard for initial configuration
# Then use mooring-iteration skill for fine-tuning

# Step 1: Line Setup Wizard for rough adjustment
model.general.LineSetupCalculationMode = "Calculate line lengths"
model["Line1"].LineSetupTargetValue = 800.0
model.InvokeLineSetupWizard()

# Step 2: Fine-tune with iteration skill
from digitalmodel.modules.orcaflex.mooring_tension_iteration import MooringTensionIterator
iterator = MooringTensionIterator(config)
iterator.load_model("adjusted_model.dat")
result = iterator.iterate_to_targets()

With Model Generator

# Generate model from template
from digitalmodel.modules.orcaflex.model_generator import generate_model

model = generate_model(
    template="mooring/spread_mooring",
    config=mooring_config,
    output="initial_model.yml"
)

# Use Line Setup Wizard to achieve target pretensions
import OrcFxAPI
ofx_model = OrcFxAPI.Model("initial_model.yml")
# Configure and run wizard...

Related Skills

• orcaflex-modeling - Run OrcaFlex simulations
• orcaflex-mooring-iteration - Advanced tension iteration
• mooring-design - Design mooring systems
• orcaflex-static-debug - Troubleshoot convergence

References

• OrcaFlex Help: Line Setup Wizard
• OrcFxAPI Documentation: Model.InvokeLineSetupWizard()
• Source: src/digitalmodel/modules/orcaflex/orcaflex_model_linesetup_wizard.py