SND Ice

Ice Plugin (Cosmic Exploration)

Source: https://github.com/LeontopodiumNivale14/Ices-Cosmic-Exploration/blob/Main-Branch/ICE/IPC/IceCosmicExplorationIPC.cs

Ice is a plugin for automating Cosmic Exploration content in FFXIV. It handles mission selection, gathering, and grinding for Cosmic/Lunar credits.

IPC API Reference

The Ice plugin provides a comprehensive IPC API for programmatic control:

-- Check if Ice is running
local running = IPC.Ice.IsRunning()  -- Returns bool

-- Enable/disable Ice automation
IPC.Ice.Enable()   -- Start Ice
IPC.Ice.Disable()  -- Stop Ice

-- Get current state (returns string: "Idle", "Running", etc.)
local state = IPC.Ice.CurrentState()

-- Get current mission ID being run
local missionId = IPC.Ice.CurrentMission()  -- Returns uint

-- Mission Management
-- Add missions to the enabled list (takes HashSet<uint>)
IPC.Ice.AddMissions({1, 2, 3})

-- Remove missions from the enabled list
IPC.Ice.RemoveMissions({4, 5, 6})

-- Toggle mission states
IPC.Ice.ToggleMissions({1, 2})

-- Enable ONLY these missions (disables all others)
IPC.Ice.OnlyMissions({7, 8, 9})

-- Clear all enabled missions
IPC.Ice.ClearAllMissions()

-- Flag a mission area on the map (opens map and shows gathering radius)
IPC.Ice.FlagMissionArea(missionId)

-- Settings Management
-- Change boolean settings (valid configs below)
IPC.Ice.ChangeSetting("OnlyGrabMission", true)
IPC.Ice.ChangeSetting("StopAfterCurrent", false)
IPC.Ice.ChangeSetting("StopOnceHitCosmoCredits", true)
IPC.Ice.ChangeSetting("StopOnceHitLunarCredits", true)
IPC.Ice.ChangeSetting("XPRelicGrind", false)

-- Change numeric settings
IPC.Ice.ChangeSettingAmount("CosmoCreditsCap", 5000)
IPC.Ice.ChangeSettingAmount("LunarCreditsCap", 3000)

Available Boolean Settings

Available Numeric Settings

Basic Commands

-- Start Ice automation (slash command)
yield("/ice start")

-- Stop Ice automation (slash command)
yield("/ice stop")

Note: The IPC API (IPC.Ice.Enable()/IPC.Ice.Disable()) is preferred over slash commands for programmatic control, as it provides immediate feedback and doesn't require waiting for command processing.

Practical Usage Examples

Example 1: Check if Ice is Running Before Starting

if not IPC.Ice.IsRunning() then
    IPC.Ice.Enable()
    LogInfo("[Ice] Started Ice automation")
end

Example 2: Stop After Current Mission

-- Set Ice to stop after completing the current mission
IPC.Ice.ChangeSetting("StopAfterCurrent", true)
LogInfo("[Ice] Ice will stop after current mission completes")

Example 3: Configure Specific Missions

-- Clear all missions and enable only specific ones
IPC.Ice.ClearAllMissions()
IPC.Ice.OnlyMissions({12, 15, 18})  -- Enable only missions 12, 15, 18
IPC.Ice.Enable()
LogInfo("[Ice] Running only missions 12, 15, 18")

Example 4: Set Credit Caps

-- Configure Ice to stop at credit thresholds
IPC.Ice.ChangeSetting("StopOnceHitCosmoCredits", true)
IPC.Ice.ChangeSettingAmount("CosmoCreditsCap", 10000)
IPC.Ice.ChangeSetting("StopOnceHitLunarCredits", true)
IPC.Ice.ChangeSettingAmount("LunarCreditsCap", 5000)
LogInfo("[Ice] Configured credit caps")

Example 5: Wait for Ice to Complete

-- Start Ice and wait for it to finish
IPC.Ice.Enable()

-- Wait until Ice is no longer running
while IPC.Ice.IsRunning() do
    yield("/wait 5")
end

LogInfo("[Ice] Ice has completed all missions")

Integration Pattern

Ice is typically used in combination with job switching and gear equipping. You can use either IPC or slash commands:

Using IPC (Recommended)

-- Stop Ice before switching jobs
if IPC.Ice.IsRunning() then
    IPC.Ice.Disable()
    LogInfo("[Ice] Stopped Ice for job switch")
end
yield("/wait 1")

-- Switch job (uiSlot = API index + 1!)
yield("/gearset change " .. uiSlot)
yield("/wait 1")

-- Equip recommended gear (AutoDuty)
yield("/ad equiprec")
yield("/wait 2")

-- Resume Ice automation
IPC.Ice.Enable()
LogInfo("[Ice] Restarted Ice after job switch")

Using Slash Commands (Legacy)

-- Stop Ice before switching jobs (use multiple stops to ensure it registers)
yield("/ice stop")
yield("/wait 0.5")
yield("/ice stop")
yield("/wait 0.5")
yield("/ice stop")
yield("/wait 1")

-- Switch job (uiSlot = API index + 1!)
yield("/gearset change " .. uiSlot)
yield("/wait 1")

-- Equip recommended gear (AutoDuty)
yield("/ad equiprec")
yield("/wait 2")

-- Resume Ice automation
yield("/ice start")

Note: The IPC method is more reliable as it provides immediate state feedback, while slash commands may require multiple attempts to register.

Typical Workflow

1. Stop Ice
2. Check job levels against breakpoints
3. Switch to job that needs leveling (if any)
4. Equip recommended gear
5. Start Ice again

Plugin Dependencies

When using Ice, you typically also need:

• AutoDuty - For /ad equiprec (equip recommended gear)
• ICE - The internal plugin name is ICE (all caps) for plugin_dependencies

Example: Job Switch with Ice (Modern IPC)

local function SwitchJobAndRestartIce(jobId)
    -- Stop current automation if running
    if IPC.Ice.IsRunning() then
        IPC.Ice.Disable()
        LogInfo("[Ice] Stopped Ice for job switch")
    end
    yield("/wait 1")

    -- Find and switch gearset
    for idx = 1, 100 do
        local gs = Player.GetGearset(idx)
        if gs and gs.ClassJob == jobId then
            -- IMPORTANT: UI slot = API index + 1!
            local uiSlot = idx + 1
            yield("/gearset change " .. uiSlot)
            yield("/wait 1")

            -- Equip recommended gear
            yield("/ad equiprec")
            yield("/wait 2")

            -- Resume automation
            IPC.Ice.Enable()
            LogInfo("[Ice] Restarted Ice on job " .. jobId)
            return true
        end
    end

    LogInfo("[Ice] Could not find gearset for job " .. jobId)
    return false
end

Example: Job Switch with Ice (Legacy Slash Commands)

local function SwitchJobAndRestartIce_Legacy(jobId)
    -- Stop current automation (multiple times to ensure it registers)
    yield("/ice stop")
    yield("/wait 0.5")
    yield("/ice stop")
    yield("/wait 0.5")
    yield("/ice stop")
    yield("/wait 1")

    -- Find and switch gearset
    for idx = 1, 100 do
        local gs = Player.GetGearset(idx)
        if gs and gs.ClassJob == jobId then
            -- IMPORTANT: UI slot = API index + 1!
            local uiSlot = idx + 1
            yield("/gearset change " .. uiSlot)
            yield("/wait 1")

            -- Equip recommended gear
            yield("/ad equiprec")
            yield("/wait 2")

            -- Resume automation
            yield("/ice start")
            return true
        end
    end
    return false
end

Notes

Best Practices

• Prefer IPC API over slash commands for better reliability and immediate state feedback
• Use IPC.Ice.IsRunning() to check state before starting/stopping
• Always stop Ice before switching jobs to avoid issues
• CRITICAL: Player.GetGearset(idx) returns API index, but /gearset change uses UI slot numbers. Always use idx + 1 for the gearset change command!
• Give adequate wait time between commands (1-2 seconds)
• Can't switch jobs during crafting, Mech Ops, or other duties - wait for them to complete first

IPC Advantages

• Immediate feedback: No need to wait for command processing
• State checking: Can query if Ice is running before acting
• Mission control: Programmatically configure which missions to run
• Settings management: Change caps and behaviors on the fly
• No multiple retries: Unlike slash commands which may need multiple attempts

Legacy Slash Commands

• If using slash commands, use multiple /ice stop commands (3x with waits) to ensure Ice actually stops
• Slash commands are still valid but less reliable for automation
• Consider migrating existing scripts to IPC for better control

Integration

• Ice handles the actual Cosmic Exploration content automatically
• Use in combination with breakpoint-based leveling scripts
• Can configure missions, credit caps, and stopping conditions via IPC
• Perfect for automated job leveling rotations