majiayu000 /spec — Collaborative Specification Workflow
This skill defines a structured two-agent specification flow.
Use canonical phases in order:
Research -> Discuss -> Draft -> Review -> Present -> Execute
Detailed step-by-step protocol lives in references/spec-workflow.md.
This file is the concise operational entrypoint.
Parse Input
From the user prompt, extract:
- topic: short kebab-case spec name (e.g.,
auth-token-rotation) - partner: partner agent handle (default:
codex) - problem: the full design problem statement
If topic/problem are unclear, ask for clarification.
Pre-flight
- Verify AMQ is available:
which amq - Verify co-op is initialized (
.amqrc), otherwise run:amq coop init - Use thread name:
spec/<topic>
First Action: Send problem to partner IMMEDIATELY
CRITICAL: Do this FIRST, before ANY research, exploration, or code reading. The entire point of the spec workflow is parallel research. Every second you spend researching before sending is a second your partner sits idle.
amq send --to <partner> --kind question \
--labels workflow:spec,phase:request \
--thread spec/<topic> --subject "Spec: <topic>" --body "<problem>"
Send the user's problem description verbatim. Do NOT include your own analysis. Do NOT pre-research "to give better context". Send it NOW, then research.
Label Convention (MANDATORY)
Use existing AMQ kinds plus labels to express spec workflow semantics:
| Phase | Kind | Labels |
|---|---|---|
| Problem statement | question |
workflow:spec,phase:request |
| Research findings | brainstorm |
workflow:spec,phase:research |
| Discussion | brainstorm |
workflow:spec,phase:discuss |
| Plan draft | review_request |
workflow:spec,phase:draft |
| Plan feedback | review_response |
workflow:spec,phase:review |
| Final decision | decision |
workflow:spec,phase:decision |
| Progress/ETA | status |
workflow:spec |
Quick Command Skeleton
# Initiate spec with problem statement
amq send --to <partner> --kind question \
--labels workflow:spec,phase:request \
--thread spec/<topic> --subject "Spec: <topic>" --body "<problem>"
# Submit independent research
amq send --to <partner> --kind brainstorm \
--labels workflow:spec,phase:research \
--thread spec/<topic> --subject "Research: <topic>" --body "<findings>"
# Discuss and align
amq send --to <partner> --kind brainstorm \
--labels workflow:spec,phase:discuss \
--thread spec/<topic> --subject "Discussion: <topic>" --body "<analysis>"
# Draft plan
amq send --to <partner> --kind review_request \
--labels workflow:spec,phase:draft \
--thread spec/<topic> --subject "Plan: <topic>" --body "<plan>"
# Review plan
amq send --to <partner> --kind review_response \
--labels workflow:spec,phase:review \
--thread spec/<topic> --subject "Review: <topic>" --body "<feedback>"
# Optional final decision message
amq send --to <partner> --kind decision \
--labels workflow:spec,phase:decision \
--thread spec/<topic> --subject "Final: <topic>" --body "<final plan>"
When You RECEIVE a Spec Message
If you receive a message labeled workflow:spec, your action depends on the phase:
| Label | Your action |
|---|---|
phase:request |
Read the problem statement, do your own independent research first, then submit findings as brainstorm + phase:research |
phase:research |
Read thread, start discussion as brainstorm + phase:discuss |
phase:discuss |
Reply with your analysis, continue discussion until aligned |
phase:draft |
REVIEW the plan and send feedback as review_response + phase:review. Do NOT implement. |
phase:review |
Revise plan if needed, or confirm alignment |
phase:decision |
STOP. Do NOT implement. Only the user can authorize implementation. Wait for the initiator to confirm user approval. |
The partner agent NEVER implements. Only the initiator presents the plan to the user. Implementation starts only after the initiator explicitly tells you the user approved and assigns you work.
Non-Negotiable Rules
- NEVER research before sending the problem to your partner. Send FIRST, research SECOND.
- NEVER skip phases or collapse directly to a finished spec.
- NEVER read partner research before submitting your own research.
- NEVER enter plan mode during research if it blocks tool usage.
- NEVER implement when you receive a plan. Review it and send feedback — that's your job.
- NEVER implement before the user approves the final plan in chat. Only the initiator talks to the user.
- ALWAYS use
--thread spec/<topic>for spec workflow messages. - ALWAYS use the label convention table above.
- ALWAYS present the final plan to the user and wait for explicit approval.
Reference
For full protocol details, templates, and phase gates, see:
- references/spec-workflow.md