Mariadb Query Optimization

MariaDB Query Optimization

Last updated: 2026-06-05

Requires: MariaDB 10.1+ for ANALYZE and histograms; optimizer improvements through 11.8 LTS (GA May 2025) form the baseline below.

Default context: Assume MariaDB 11.8 LTS unless the user states another version. Features marked 12.x may be suggested when relevant (including as upgrade options), but always state the minimum version — do not present them as available on 11.8.

What LLMs Get Wrong

Performance Schema (enable first)

Before EXPLAIN, indexes, or query rewrites, confirm the server can observe what queries are doing. MariaDB's Performance Schema is the built-in monitoring layer (10.5+: ~80 tables in the performance_schema database).

Check status:

SHOW VARIABLES LIKE 'performance_schema';

Critical: Performance Schema is disabled by default and cannot be enabled at runtime. If OFF, add to my.cnf and restart:

[mysqld]
performance_schema=ON

After restart, enable the consumers and instruments you need. Scope with WHERE NAME LIKE '...' rather than enabling everything blindly in production — see the overview doc:

UPDATE performance_schema.setup_consumers SET ENABLED = 'YES';
UPDATE performance_schema.setup_instruments SET ENABLED = 'YES', TIMED = 'YES';

Use performance_schema (waits, stages, statements, and related summary tables) to see where time goes; then use EXPLAIN and ANALYZE below to understand why the optimizer chose a plan. On 10.7.1+, column comments help interpret tables:

SELECT column_name, column_comment
  FROM information_schema.columns
 WHERE table_schema = 'performance_schema' AND table_name = 'events_statements_summary_by_digest';

Reading EXPLAIN

With Performance Schema available when diagnosing production slowness, run EXPLAIN to inspect the optimizer's plan:

EXPLAIN SELECT * FROM orders WHERE customer_id = 42 ORDER BY created_at DESC LIMIT 10;

Red flags in the output:

ANALYZE statement (MariaDB 10.1+) actually executes the query and shows real row counts vs. estimates — more reliable than EXPLAIN alone. Note: MariaDB uses ANALYZE, not EXPLAIN ANALYZE:

ANALYZE SELECT * FROM orders WHERE customer_id = 42;

Optimizer Trace shows the optimizer's full decision process. Since MariaDB 12.1 the trace can include full table and view definitions (optimizer_record_context system variable). Since 13.0 it also includes the specific statistics (histograms, index stats) used for cardinality estimates — together they're powerful for diagnosing surprising rows estimates:

SET optimizer_trace = 'enabled=on';
SELECT * FROM orders WHERE customer_id = 42;
SELECT * FROM INFORMATION_SCHEMA.OPTIMIZER_TRACE\G
SET optimizer_trace = 'enabled=off';

Indexing Rules

The Leftmost Prefix Rule

For a composite index (a, b, c), MariaDB can use:

• WHERE a = 1 ✅
• WHERE a = 1 AND b = 2 ✅
• WHERE a = 1 AND b = 2 AND c = 3 ✅
• WHERE b = 2 ✗ — skips a, index not used
• WHERE a = 1 AND c = 3 — only a part is used

Put the most selective equality conditions first, then range conditions last:

-- Query: WHERE status = 'active' AND created_at > '2025-01-01' ORDER BY created_at
INDEX (status, created_at)  -- ✅ equality first, range last
INDEX (created_at, status)  -- ✗ range first breaks the prefix for status

Covering Indexes

A covering index includes all columns needed by the query — no table row access needed (Using index in EXPLAIN):

-- Query fetches id, status, created_at for a customer
-- Covering index includes all three:
CREATE INDEX idx_customer_cover ON orders (customer_id, status, created_at);
-- Now EXPLAIN shows: Extra = Using index

When NOT to Add an Index

• Low-cardinality columns: a status column with values active/inactive affects 50% of rows — the optimizer prefers a table scan. Index useful only when combined with other high-selectivity columns.
• Small tables (< a few thousand rows): full scans are faster than index lookups for tiny tables.
• Write-heavy columns: every index slows INSERT, UPDATE, DELETE — don't index columns that are rarely queried.

Ignored Indexes (not INVISIBLE)

To make the optimizer skip an index without dropping it — useful for testing whether an index is actually needed before removing it — MariaDB uses IGNORED, not MySQL's INVISIBLE:

-- ✅ MariaDB syntax (10.6+):
ALTER TABLE demo ALTER INDEX index_name IGNORED;
ALTER TABLE demo ALTER INDEX index_name NOT IGNORED;  -- re-enable

-- ✗ MySQL syntax — fails on MariaDB:
ALTER TABLE demo ALTER INDEX index_name INVISIBLE;

The index is still maintained on writes; it's just hidden from the optimizer. A primary key cannot be ignored. See Ignored Indexes.

Functions on Indexed Columns

The classic rule "any function on an indexed column disables the index" is outdated for MariaDB 11.1+ and 11.4 LTS. The optimizer can now use indexes for a number of common function patterns:

For cases that the optimizer still can't sargabilize, the rewrite-to-range pattern remains valid:

WHERE created_at >= '2025-01-01' AND created_at < '2026-01-01'

Verify with EXPLAIN rather than assuming: on 11.4+ many "won't use the index" rewrites are now no-ops. If EXPLAIN still shows type=ALL for a sargable pattern, check @@optimizer_switch for sargable_casefold and confirm the column's collation is _ci.

Functional Indexes: Use a Generated Column

MySQL 8.0.13+ supports functional key parts — indexing an expression directly with a doubled-parenthesis syntax. MariaDB does not support this:

-- ✗ MySQL syntax — fails on MariaDB:
CREATE INDEX idx_upper ON users ((UPPER(name)));
ALTER TABLE orders ADD INDEX ((total * quantity));

In MariaDB, index a generated (computed) column instead. A VIRTUAL column stores nothing and is computed on read; the index on it persists the expression's value, which is what gets searched:

-- ✅ MariaDB equivalent:
ALTER TABLE users
  ADD COLUMN name_upper VARCHAR(255) AS (UPPER(name)) VIRTUAL,
  ADD INDEX idx_name_upper (name_upper);

-- Query the column the optimizer can resolve directly,
-- or rely on virtual-column optimizer support (11.8+) for WHERE UPPER(name) = ...
SELECT * FROM users WHERE name_upper = 'ALICE';

Note that for many simple cases (YEAR(col), UPPER(col) on _ci collations) MariaDB 11.1+ no longer needs an indexed expression at all — see the table above. Reach for a generated column when the expression isn't sargable on its own.

Pagination: Cursor-Based Instead of OFFSET

OFFSET is a hidden performance trap. LIMIT 10 OFFSET 50000 scans and discards 50,000 rows on every page load.

-- ✗ Slow — scans 50,000 rows to skip them:
SELECT id, title FROM posts ORDER BY id DESC LIMIT 10 OFFSET 50000;

-- ✅ Fast — index seek directly to the cursor position:
-- First page:
SELECT id, title FROM posts ORDER BY id DESC LIMIT 10;

-- Next page (pass last id from previous result as $last_id):
SELECT id, title FROM posts WHERE id < $last_id ORDER BY id DESC LIMIT 10;

For filtered queries, include the filter column in the index alongside id:

-- Query: WHERE category = 'news' ORDER BY id DESC
CREATE INDEX idx_cat_id ON posts (category, id);
-- Cursor query:
SELECT id, title FROM posts WHERE category = 'news' AND id < $last_id ORDER BY id DESC LIMIT 10;

To detect whether another page exists, fetch LIMIT 11 and check if the 11th row appears.

Histogram Statistics

Histograms let the optimizer understand data distribution on non-indexed columns — critical for query plan quality on complex queries. Without them, the optimizer assumes uniform distribution and can choose wrong join orders.

-- Collect histograms for a table (requires a full scan — run during low traffic):
ANALYZE TABLE orders;

-- Verify histograms were collected:
SELECT * FROM mysql.column_stats WHERE table_name = 'orders';

When to run ANALYZE TABLE:

• After bulk inserts or large data changes
• When EXPLAIN shows unexpectedly high rows estimates
• After initially creating a table and loading data

Tune histogram granularity for tables with highly skewed data distributions:

SET histogram_size = 100;  -- default is 0 (disabled) in older versions, 254 in 10.4.3+
ANALYZE TABLE orders;

Histograms are collected per-column automatically when using ANALYZE TABLE with histogram_size > 0. They are stored in mysql.column_stats and consulted when optimizer_use_condition_selectivity >= 4 (default in 10.4.1+).

MariaDB Optimizer Switches

MariaDB's optimizer has more tunable flags than MySQL. The most useful for developers:

-- See current settings:
SELECT @@optimizer_switch\G

-- Disable a specific optimization for a session (useful for debugging):
SET optimizer_switch = 'derived_merge=off';

-- Re-enable:
SET optimizer_switch = 'derived_merge=on';

Most impactful flags:

Turn flags off one at a time to isolate which optimization is causing a bad plan, then report via JIRA if a default setting produces a worse plan than the alternative.

Optimizer Improvements in the 10.7–10.11 LTS Window

The 10.11 LTS line bundles features that arrived in the 10.7–10.10 short-term releases:

• JSON-format histograms (10.8+, MDEV-21130, MDEV-26519) — histogram statistics are stored in JSON and are more precise than the older binary format. Just running ANALYZE TABLE on 10.8+ gives the optimizer better cardinality estimates.
• Descending indexes (10.8+, MDEV-13756) — CREATE INDEX idx ON t (a ASC, b DESC) is supported; useful for composite ORDER BY a, b DESC patterns and for MIN()/MAX() on descending indexes.
• SHOW ANALYZE [FORMAT=JSON] (10.9+, MDEV-27021) — get the optimizer plan and runtime stats for a query running in another connection without intrusion. EXPLAIN FOR CONNECTION syntax also supported (MDEV-10000).
• Improved optimization for joins with many eq_ref tables (10.10+, MDEV-28852, MDEV-26278) — large star-schema-style joins plan dramatically better.
• ANALYZE FORMAT=JSON reports time spent in the optimizer itself (10.11+, MDEV-28926) — separates planning time from execution time.

Optimizer Improvements in 11.4 LTS

The 11.4 LTS line continues the overhaul:

• New cost-based cost model (11.0+) — replaces the older rule-based heuristics with a tuned model aware of SSDs and per-engine characteristics. EXPLAIN and join-order choices in 10.6 vs. 11.4 can differ noticeably on the same query. If you have manual optimizer_adjust_secondary_key_costs settings from 10.x, remove them — they're no-ops on 11.4+.
• Semi-join optimization for single-table UPDATE/DELETE (11.1+, MDEV-7487) — subqueries inside UPDATE/DELETE can now use the same subquery rewrites that SELECT uses (materialization, semi-join, etc.). Often a large speedup, no rewrite needed.
• Sargable DATE/YEAR comparisons against constants (11.1+, MDEV-8320) — see Functions on Indexed Columns above.
• Sargable case-folding (11.3+, MDEV-31496, sargable_casefold on by default) — UCASE/LCASE/UPPER/LOWER on a column with a case-insensitive collation can use the index.

Optimizer Improvements in 11.5–11.8 LTS

These are part of the current LTS baseline — useful for understanding what the optimizer can do today:

• Index Condition Pushdown on partitioned tables (11.5+, MDEV-12404) — previously partitioned tables couldn't use ICP; now they do, often a large speedup on partitioned schemas
• ANALYZE shows selectivity of pushed index condition (11.5+, MDEV-18478) — useful when diagnosing whether ICP is helping
• Charset Narrowing Optimization on by default (11.8+, MDEV-34380) — eliminates unnecessary character set conversions in WHERE clauses
• SUBSTR(col, 1, n) = const_str optimization (11.8+, MDEV-34911) — the optimizer can now use a column index even when the condition is a leading-prefix SUBSTR
• Virtual column support in the optimizer (11.8+, MDEV-35616) — see Virtual Column Support in the Optimizer; previously, virtual columns were largely invisible to the optimizer
• Cost-based subquery strategy for single-table UPDATE/DELETE (11.8+, MDEV-25008) — the optimizer now picks between subquery strategies by cost

Optimizer Improvements in MariaDB 12.x

Several further limitations were lifted in the 12.x rolling releases:

• Rowid filtering on reverse-ordered scans (12.0+) — previously ORDER BY ... DESC queries couldn't benefit from rowid filtering; now they can
• Index Condition Pushdown on reverse-ordered scans (12.0+) — same fix for ICP
• Loose Index Scan ("Use index for group-by") works with DESC key parts (12.0+) — previously required ASC indexes
• GROUP BY / ORDER BY can use indexes on virtual columns (12.1+)
• Reorderable LEFT JOIN optimization (12.3+) — the optimizer can now reorder more LEFT JOIN combinations
• Distinct GROUP BY column inference (12.2+) — derived tables with GROUP BY are recognized as having distinct group keys, enabling more optimizations downstream

If you target the 11.8 LTS baseline and see a plan that looks needlessly slow on a reverse-ordered or virtual-column query, it may be one of these — verify by running the same query on a 12.x version.

Optimizer Hints

MariaDB 12.0 introduced a comprehensive MySQL-8-style optimizer hints framework (MDEV-35504), with additional hints added through 12.1 and 12.2. Hints go in a /*+ ... */ comment right after SELECT and override the optimizer for one query without changing session settings:

SELECT /*+ JOIN_ORDER(o, c) */ *
FROM orders o JOIN customers c ON c.id = o.customer_id;

Available hints:

QB_NAME() example — name a subquery so an outer hint can target it:

SELECT /*+ NO_MERGE(@sub) */ *
FROM (
    SELECT /*+ QB_NAME(sub) */ customer_id, COUNT(*) AS n
    FROM orders
    GROUP BY customer_id
) t
WHERE n > 10;

Hints are more targeted than SET optimizer_switch because they apply only to the query they're in, not the whole session.

Bounding Expensive Queries: LIMIT ROWS EXAMINED

LIMIT ROWS EXAMINED is a MariaDB-specific extension (since 5.5.21) with no MySQL equivalent. It caps how many rows a SELECT may examine, terminating execution early once the cap is hit — a safety valve against runaway scans on unbounded or ad-hoc queries:

-- Up to 10 result rows, but stop after examining 10,000 rows:
SELECT * FROM t1, t2 LIMIT 10 ROWS EXAMINED 10000;

-- The cap can be used on its own:
SELECT * FROM big_table WHERE status = 'x' LIMIT ROWS EXAMINED 50000;

When the cap is reached the query returns a partial result set plus a warning — so it is a guard rail, not a way to get correct-but-faster answers. SELECT only; it is a syntax error on UPDATE/DELETE. For a time-based bound instead, use the MAX_EXECUTION_TIME(ms) optimizer hint (12.0+) above. See LIMIT ROWS EXAMINED.

Quick Wins Checklist

Before adding indexes or rewriting queries, check these first:

1. Confirm performance_schema=ON at startup (restart required if off) — Performance Schema Overview
2. EXPLAIN the slow query — confirm where the time actually is
3. ANALYZE TABLE — stale statistics cause bad plans
4. Check for functions on indexed columns in WHERE — note many cases are now sargable on 11.4+ (YEAR(), DATE(), UPPER() on _ci collations)
5. Check for OFFSET in pagination queries
6. Verify composite index column order matches query predicates (leftmost prefix)
7. Check EXPLAIN Extra column for Using filesort or Using temporary — these often point to a missing or misordered index

Sources

• Query Optimizations — MariaDB Docs
• Performance Schema Overview — MariaDB Docs
• EXPLAIN — MariaDB Docs
• optimizer_switch — MariaDB Docs
• Getting Started with Indexes — MariaDB Docs
• Building the Best Index for a Given SELECT — MariaDB Docs
• Histogram-Based Statistics — MariaDB Docs
• Pagination Optimization — MariaDB Docs

For topics not covered here, see the official MariaDB documentation at mariadb.com/docs.

This page is: Copyright © 2026 MariaDB. All rights reserved.