Shadow Frog Dream

ShadowFrog Dream

Autonomous experimentation while the user is away. Every task is an experiment — implement real code in a worktree, run it, persist as a named git branch pushed to a remote the user can write to. Dream's unique value is implementation experience that compounds across sessions.

Critical Invariants

These rules are stated ONCE here and enforced by helper scripts. Violating any of them is a completion criteria failure.

Prerequisite: .shadow/ must be git-tracked

Dream moves .shadow/ content through git — artifacts are committed onto the dream branch, pushed to the remote, then read back by the reconciler via git show origin/<branch> .shadow/.... If .shadow/ is gitignored (the "local only" option in shadow-frog-init), git add -A silently skips those files, nothing reaches the remote, and the reconciler finds no manifest — every discovery is lost without warning. dream-setup.sh runs git check-ignore .shadow up front and refuses to start if it's ignored. Use shadow-frog-update instead for local-only shadows.

Path Isolation

WORKTREE_BASE = /tmp/shadowfrog-dreams/<DREAM_NS>/
WORKTREE_DIR  = $WORKTREE_BASE/dream-<SLUG>

• Worktrees are ALWAYS in /tmp/shadowfrog-dreams/<DREAM_NS>/, NEVER in the project directory. This prevents conflicts between parallel agents and keeps the main repo clean.
• DREAM_NS (namespace) isolates branches per task/instance. Resolved from: DREAM_NAMESPACE env → TASK_INFO.json → .env → repo basename.
• Override only with DREAM_WORKTREE_BASE env var if /tmp is too small.
• dream-setup.sh computes and enforces all paths. Use it.

Branch Naming

BRANCH_NAME = dream/<DREAM_NS>/<DREAM_ID>
DREAM_ID    = YYYYMMDD-HHMMSSZ-<SLUG>

Artifact Format

.shadow/_dreams/<DREAM_ID>/report.md
.shadow/_dreams/<DREAM_ID>/manifest.json
.shadow/_dreams/<DREAM_ID>/patch.diff

NEVER flat files (_dreams/<DREAM_ID>.md). Flat files break the pipeline.

RUN_PREFIX

All python/pytest commands MUST use the RUN_PREFIX resolved during preflight. When RUN_PREFIX="uv run", use $RUN_PREFIX python3 .... Bare python3 or pytest without prefix is a violation when non-empty.

Reconciliation is Mandatory

Every dream branch must reconcile to main before the session ends. The most common failure mode is agents pushing dream branches but never reconciling — losing all discoveries.

Two modes:

• Parallel mode (default): Launch a batch of 3-4 sub-agents → wait for all to push → run dream-reconcile.py "$REPO_ROOT" ONCE at the end of the batch. The reconciler auto-discovers every un-reconciled dream branch in the namespace — you do NOT pass branch names. One call merges every pushed branch.
• Sequential mode (fallback when sub-agents unavailable): Complete dream → push → reconcile → verify → next dream. Adds ~30s per dream but guarantees zero data loss if the session crashes mid-batch.

Never queue multiple un-reconciled batches; reconcile at the end of each batch or each individual dream.

Script Failure Recovery

All helper scripts (dream-setup.sh, dream-reconcile.py, dream-validate.py) are self-documenting. If a script fails or is unavailable: read the script source, understand what it does, and adapt its logic manually for your situation. Never skip steps just because a script errored — the steps still need to happen.

Pushable remote
  main --- .shadow/ (accumulated ALL discoveries)
  |
  +-- dream/<ns>/<id-1>  (cycle 1, agent A, from main)
  +-- dream/<ns>/<id-2>  (cycle 1, agent B, from main)
  +-- dream/<ns>/<id-3>  (cycle 2, from dream/<ns>/<id-1>, compounding)

• Branches are live — git checkout dream/<id> runs the code
• Shadow follows lineage — ancestor chain, not sibling branches
• Main is the accumulator — reconciliation merges ALL discoveries

Prerequisites

1. Repo cloned locally with a pushable remote where dream/... branches are allowed
2. ShadowFrog skills installed (install.sh --project /path/to/repo)
3. .shadow/ initialized (/shadow-frog-init) and tracked by git

Use the user's existing repo directly when it has a remote that accepts dream/... branches. If no writable remote is configured, do not start a dream run; the user must configure one first.

Helper Scripts

This skill bundles 6 helper scripts. Find them in the skill directory:

SKILL_DIR=""
for DIR in .github/skills/shadow-frog-dream .claude/skills/shadow-frog-dream; do
    [ -d "$DIR" ] && SKILL_DIR="$DIR" && break
done

Usage patterns:

# Setup: creates worktree, prints export vars.
# IMPORTANT: capture the output FIRST, then eval it. Writing
# `eval "$(dream-setup.sh ...)" || exit 1` does NOT catch failures: if the
# command substitution exits non-zero and prints nothing, `eval ""` still
# succeeds (exit 0) and the agent silently proceeds with empty env vars.
# Assigning to a variable makes `|| exit 1` fire on the script's real exit code.
SETUP_OUT="$("$SKILL_DIR/dream-setup.sh" --slug t01-my-experiment)" || exit 1
eval "$SETUP_OUT"
# → exports (keep in sync with dream-setup.sh emit_export block):
#   REPO_ROOT, DEFAULT_BRANCH, DREAM_NS, DREAM_ID, BRANCH_NAME, PARENT_BRANCH,
#   WORKTREE_DIR, WORKTREE_BASE, BASE_COMMIT, RUN_PREFIX, SLUG

# Validate: hard gate before push
python3 "$SKILL_DIR/dream-validate.py" "$DREAM_ID" "$WORKTREE_DIR"

# Reconcile: merge all dream branches into main
python3 "$SKILL_DIR/dream-reconcile.py" "$REPO_ROOT"
# After `git push` succeeds, optionally clean up reconciled branches.
# Cleanup REFUSES to run if `.shadow/` has uncommitted changes, or unless
# HEAD is already on origin/<default-branch> — so the canonical flow is:
#   reconcile → git add .shadow/ && git commit && git push → re-run --cleanup-branches
python3 "$SKILL_DIR/dream-reconcile.py" "$REPO_ROOT" --cleanup-branches

# Coverage: show which files still need exploration
python3 "$SKILL_DIR/dream-coverage.py" "$REPO_ROOT"

# All scripts support --help.

If a script is not found or fails, read its source — they are self-documenting. Adapt the steps manually if needed (see each phase for inline fallback instructions).

Phase 1: Preflight and Assess

Preflight Validation

REPO_ROOT=$(git rev-parse --show-toplevel)
cd "$REPO_ROOT"

# 0. Auto-detect DREAM_NAMESPACE
if [ -z "${DREAM_NAMESPACE:-}" ]; then
    if [ -f TASK_INFO.json ]; then
        DREAM_NAMESPACE=$(python3 -c "import json; print(json.load(open('TASK_INFO.json')).get('dream_namespace',''))" 2>/dev/null)
        export DREAM_NAMESPACE
    elif [ -f .env ]; then
        DREAM_NAMESPACE=$(grep '^DREAM_NAMESPACE=' .env | head -1 | cut -d'=' -f2-)
        export DREAM_NAMESPACE
    fi
fi
[ -n "${DREAM_NAMESPACE:-}" ] && echo "Dream namespace: $DREAM_NAMESPACE"

# 1. Detect default branch
DEFAULT_BRANCH=$(git symbolic-ref refs/remotes/origin/HEAD 2>/dev/null | sed 's|refs/remotes/origin/||')
if [ -z "$DEFAULT_BRANCH" ]; then
    if git show-ref --verify refs/remotes/origin/main >/dev/null 2>&1; then
        DEFAULT_BRANCH="main"
    elif git show-ref --verify refs/remotes/origin/master >/dev/null 2>&1; then
        DEFAULT_BRANCH="master"
    else
        echo "ERROR: Cannot detect default branch. Fix: git remote set-head origin <branch>"
    fi
fi
echo "Default branch: $DEFAULT_BRANCH"

# 2-5. Validate environment
echo "Current branch: $(git branch --show-current)"
echo "Remote: $(git remote get-url origin)"
git ls-remote origin HEAD >/dev/null 2>&1 || echo "ERROR: Cannot reach remote."
[ -d .shadow ] || echo "ERROR: .shadow/ not found. Run /shadow-frog-init first."
mkdir -p .shadow/_dreams
git diff --quiet && git diff --cached --quiet || echo "ERROR: Uncommitted changes."

# 6. Fetch all remote branches (ONE fetch for all agents)
git fetch origin --prune

# 7. List dream branches (namespace-filtered)
DREAM_NS="${DREAM_NAMESPACE:-}"
BRANCH_PATTERN="${DREAM_NS:+origin/dream/${DREAM_NS}/}"
BRANCH_PATTERN="${BRANCH_PATTERN:-origin/dream/}"
echo "Available dream branches:"
git branch -r | grep "$BRANCH_PATTERN" | sed 's|origin/||' || echo "  (none)"

# 8. Detect RUN_PREFIX from lockfiles
if [ -f uv.lock ]; then
    uv sync --all-groups 2>&1 | tail -3
    RUN_PREFIX="uv run"
elif [ -f package-lock.json ]; then
    npm install --quiet 2>&1 | tail -3
    RUN_PREFIX="npx"
elif [ -f yarn.lock ]; then
    yarn install --silent 2>&1 | tail -3
    RUN_PREFIX="npx"
else
    RUN_PREFIX=""
fi
echo "RUN_PREFIX='$RUN_PREFIX'"

# 9. List compoundable experiments
echo ""
echo "=== COMPOUNDABLE EXPERIMENTS ==="
if [ -f .shadow/_dreams/_index.md ]; then
    awk -F'|' 'NR>2 && /useful/ {
        gsub(/ /,"",$2); gsub(/ /,"",$4); gsub(/ /,"",$6);
        gsub(/^ +| +$/,"",$5);
        if ($2 != "" && $6 != "") print $6 " | " $3 " | " $5
    }' .shadow/_dreams/_index.md
    COMPOUNDABLE=$(awk -F'|' 'NR>2 && /useful/ {gsub(/ /,"",$2); if ($2 != "") c++} END {print c+0}' .shadow/_dreams/_index.md)
    echo "Total compoundable: $COMPOUNDABLE"
else
    echo "(none — first dream session)"
fi

If any check prints ERROR, STOP. Do not use exit 1 — check output and stop at the agent level.

(RUN_PREFIX MUST be threaded into every subagent prompt — see Critical Invariants above. Bare python3/pytest without prefix = completion criteria violation.)

Snapshot Branch State

After the single git fetch, capture dream branches and pass to all sub-agents — they do NOT fetch independently.

DREAM_NS="${DREAM_NAMESPACE:-}"
BRANCH_FILTER="${DREAM_NS:+origin/dream/${DREAM_NS}/}"
BRANCH_FILTER="${BRANCH_FILTER:-origin/dream/}"
git branch -r --format='%(refname:short) %(objectname:short)' \
  | grep -F "$BRANCH_FILTER" \
  | sed 's|origin/||' > .shadow/_dreams/.branch-map.txt
cat .shadow/_dreams/.branch-map.txt

# Initialize session tracking (orchestrator-only; agents do NOT write here)
: > .shadow/_dreams/.session-branches.txt

Assess Codebase

Read _meta/state.json, _index.md, existing discoveries, and past dream reports in _dreams/.

Build Exploration Coverage Map

File-level coverage breadth is the strongest predictor of dream success (r²=0.63 vs bugs found), NOT dream count (r²=0.04).

# Find and run the coverage script
COVERAGE_SCRIPT=""
for DIR in .github/skills/shadow-frog-dream .claude/skills/shadow-frog-dream; do
    [ -f "$DIR/dream-coverage.py" ] && COVERAGE_SCRIPT="$DIR/dream-coverage.py" && break
done
[ -n "$COVERAGE_SCRIPT" ] && python3 "$COVERAGE_SCRIPT" "$REPO_ROOT" || echo "WARNING: dream-coverage.py not found"

Coverage definition: A file is "covered" only when its shadow has ≥1 behavioral discovery (line starting with - ). Placeholder-only = NOT covered.

Scoped exploration (--scope) — pass --scope <path-prefix> (repeatable) to restrict the coverage map to a specific subtree. Use this when the broader repo is well-explored but a particular area (e.g., a known frontier of bugs, a newly-added module, a subsystem the user just flagged) deserves a focused dream session. All counts (totals, %, saturated, fan-in, per-dir) are computed over the scoped subset only.

# Scope to one subtree
python3 "$COVERAGE_SCRIPT" "$REPO_ROOT" --scope src/auth/

# Scope to multiple subtrees in one pass
python3 "$COVERAGE_SCRIPT" "$REPO_ROOT" --scope src/auth/ --scope src/db/

When using --scope, the per-category task quotas (Phase 2) still apply but are interpreted against the scoped subset. Don't use scoped exploration as the default — pick it only when there's a concrete reason to concentrate effort. Unscoped diversity remains the strongest predictor of useful discoveries.

Review Past Dreams (Required)

When compoundable experiments exist (preflight step 9):

• Read each report: cat .shadow/_dreams/<dream_id>/report.md
• Choose which to continue (extending, fixing, integrating)
• Note dead_end experiments to avoid repeating
• Trace lineage via the parent column in _dreams/_index.md

Compounding quality gate — before choosing to compound from a parent:

1. Read the parent's report.md AND manifest.json
2. Verify the parent has a non-empty patch.diff (prose-only parents are low-value — prefer parents with working code)
3. Identify at least one specific file or function you plan to modify/extend
4. Check the parent's area isn't saturated (8+ discoveries) — if it is, start fresh from main unless you have a concrete new angle
5. Log your compounding intent: "I will extend parent's retry logic in src/http.py to handle connection timeouts" — vague "continue exploring" is NOT compounding

First dream session: if preflight step 9 shows (none), all tasks branch from main.

Phase 2: Plan

Generate a concrete plan. Target 12 tasks (2 per category). On small codebases (<30 source files), minimum 6 tasks across 4+ categories.

The 6 Investigation Categories

Exception — user-directed focus: If the user specifies a focus area (e.g., "dream focus on security"), allocate ALL tasks to that category.

Task Plan Format

Each task specifies base branch, primary target file(s), and why:

Tasks (by category):
  Investigation:
    1. [title] — write tracing tests for [target]
       Base: main
       Target: src/auth/validator.py (UNCOVERED, 12 refs)
       Why: High fan-in utility with no shadow coverage
  Bug hunting:
    1. [title] — fuzz [target]
       Base: dream/<ns>/<prior-id> (compounds prior)
       Target: src/parsers/csv.py (extending parent's failing tests)
       Why: Parent found 2 crashes, need to verify fixes
  ...

Diversity Rules

Prevent fixation (exploring the same files while leaving most untouched):

1. Max 2 tasks per source file (unless prior dream left concrete follow-up)
2. ≥30% of tasks on uncovered files (from coverage map)
3. ≥2 tasks on "deep" files (utilities, internals, converters)
4. Vary directories — no 3+ consecutive tasks in same dir

Self-check before finalizing: unique target files ≥ 60% of task count, uncovered file tasks ≥ 30%, no file in > 2 tasks. Swap if failing.

Escape hatches (document justification): prior dream's failing test, concrete untested hypothesis, file is 500+ lines with unexplored sections, codebase has <20 source files.

Task Design

Each task needs: category, hypothesis, what to implement, base branch, primary target (with coverage status), why this target, scope (hours, not days), and success criteria.

Good examples (one per category):

• Investigation: "Write assertion harness for request lifecycle — instrument each layer to log entry/exit and reveal implicit contracts"
• Bug hunting: "Fuzz the CSV parser with malformed inputs — what crashes or silently corrupts?"
• Feature design: "Implement retry logic with exponential backoff — does it handle transient failures without masking permanent ones?"
• Refactoring: "Extract 5 duplicate auth checks into middleware — run tests, measure if it simplifies without breaking special cases"
• Optimization: "Benchmark the hot path, implement LRU cache for repeated lookups — measure before/after wall time"
• Security audit: "Craft SQL injection payloads for user-facing endpoints — does parameterized query hold under nested quotes?"

Bad examples: "Look at the code", "Trace the flow", "Review error handling", "Improve code quality"

Feature Design: Motivation Required

Feature experiments must address a real gap identified in existing code. Answer: "Why would maintainers want this?" with a specific code reference. The feature must connect to the existing codebase (imports, modifies, replaces duplication). Standalone modules with only stdlib don't qualify.

Vary Your Approach

Each experiment should have unique structure driven by its hypothesis. If you find yourself copying the same module layout (one source file + one test file, identical importlib hack) across experiments, you're optimizing for throughput over insight. Vary your approach: some experiments modify existing files, some add tests for existing code, some create minimal scripts, some refactor existing modules.

File Selection Guidance

Agents gravitate toward entry points. Evaluation shows this causes missed bugs.

High-value targets typically missed:

• High fan-in files (imported by many, rarely explored directly)
• Internal/private modules (_internal/, _utils/, _compat/)
• Conversion/serialization code (parse, encode, format, marshal)
• Error handling paths (exception hierarchies, fallback logic)

Avoid: Starting from __init__.py, skipping "boring" files, same directory 3+ times, ignoring files with few public symbols.

Phase 3: Execute Tasks

Work through the plan. Launch 3-4 experiments in parallel via sub-agents. Each handles the full lifecycle: create worktree → implement → test → write shadow + manifest + report → commit → push → clean up. If sub-agents are unavailable, fall back to sequential execution.

Each experiment runs in a separate git worktree. The worktree IS the dream branch (created with -b). After pushing, the worktree is removed but the branch persists on the remote.

Reading Before Implementing

You must understand the code before changing it. For each task:

1. Read the source file(s) and their shadows (existing discoveries)
2. Read shadows of referenced/referencing files
3. Understand the current behavior, edge cases, and implicit contracts

Reading is preparation, not the deliverable. The deliverable is code written, code run, results recorded.

Experiment Setup

Use dream-setup.sh to create worktrees (handles all path computation, namespace resolution, worktree creation, and validation):

# Find the setup script
SETUP_SCRIPT=""
for DIR in .github/skills/shadow-frog-dream .claude/skills/shadow-frog-dream; do
    [ -f "$DIR/dream-setup.sh" ] && SETUP_SCRIPT="$DIR/dream-setup.sh" && break
done

# Fresh experiment from main:
SETUP_OUT="$("$SETUP_SCRIPT" --slug t01-csv-fuzzer)" || exit 1
eval "$SETUP_OUT"

# Compounding from prior dream:
SETUP_OUT="$("$SETUP_SCRIPT" --slug t03-extend --base-branch dream/<ns>/<prior-id>)" || exit 1
eval "$SETUP_OUT"

Capture into SETUP_OUT first, then eval it — see Helper Scripts § usage patterns (above) for why bare eval "$(…)" || exit 1 silently swallows the script's exit code.

This exports (keep in sync with dream-setup.sh): REPO_ROOT, DEFAULT_BRANCH, DREAM_NS, DREAM_ID, BRANCH_NAME, PARENT_BRANCH, WORKTREE_DIR, WORKTREE_BASE, BASE_COMMIT, RUN_PREFIX, SLUG.

If dream-setup.sh fails or is not found: Apply the Script Failure Recovery rule (read the script source, adapt its logic). Common causes: missing git remote, branch already exists, /tmp permissions.

Note: Shell variables don't persist across tool calls. Either run multi-step setup in a single shell, or re-derive values. From inside a worktree, get main repo with: git -C "$(git rev-parse --git-common-dir)/.." rev-parse --show-toplevel

If worktree creation fails: mark task blocked, replace with another.

What Meaningful Compounding Looks Like

Compounding means actively engaging with the parent's code, not just sitting on its branch. Valid compounding approaches:

• Extend: import or call the parent's modules and build on them
• Modify: edit the parent's code to fix limitations noted in its report
• Refactor: restructure the parent's implementation for better design
• Integrate: wire the parent's standalone module into the real codebase
• Test deeper: add edge-case tests for the parent's implementation

Don't assume the parent dream's code is complete or frozen — iterative improvement is the whole point. If you can't find anything meaningful to build on, start fresh from main instead.

Compounding that only adds a new standalone module beside the parent's code (with no imports, edits, or integration) is NOT compounding — it's a fresh experiment on the wrong branch.

Run

1. Implement the experiment — write real code, run tests/builds
2. Note what worked, broke, surprised
3. Debug if needed — the struggle produces the best discoveries
4. Record results as you go

Write Shadow Discoveries

On the dream branch (in the worktree), NOT on main.

Every experiment MUST write ≥1 discovery to a per-file .shadow/*.md. Authoring order: write the human-readable shadow first, then mirror every discovery into manifest.json. For reconciliation the manifest is the source of truth — the reconciler merges manifest entries into main, so a discovery that is missing from the manifest never reaches main. The per-file shadow is the human-readable copy (and a required validate gate), not the propagation path.

Follow the dedup and writing rules in /shadow-frog. Dream discoveries are typically source: exploration. Mark verified when confirmed by running code; uncertain if not fully testable.

How to Append

Find the ##/### heading for the symbol, then:

• Placeholder _No discoveries yet._ → replace with discovery
• Existing discoveries → append after last bullet
• No heading → create before ## Cross-References

Label Triage (REQUIRED)

After writing each discovery, evaluate whether it deserves any of the five actionable labels from /shadow-frog (bug, security, performance, feature-gap, tech-debt). Apply labels when:

Rules:

• Apply labels to BOTH the in-file discovery markdown AND the manifest.json discovery entry ("labels": ["bug"]). The reconciler uses the manifest as source of truth; the in-file copy is for humans reading the shadow directly.
• Multiple labels are fine when accurate: labels: [bug, security].
• Omit labels for pure behavioral observations ("retries N times before giving up", "default timeout is 30s") — these are knowledge, not action items.
• Do not apply labels speculatively. The label says "an engineer should act on this." If you wouldn't act on it, don't label it.

Examples:

- /api/upload accepts paths from request body without normalization,
  allowing `../` traversal into /etc/.
  _(verified, source: exploration, labels: [bug, security])_
  Dream report: `_dreams/20260518-161200Z-upload-traversal/`

- HttpClient.send retries 3x on transient failures.
  _(verified, source: exploration)_
  Dream report: `_dreams/20260518-163000Z-retry-audit/`

(No label — pure behavioral knowledge, no action implied.)

dream-validate.py emits non-blocking warnings when discovery text contains label-signal keywords but no label is set. Treat those warnings as a prompt to re-check the triage, not as a directive.

Anchor Rules

• About existing code → anchor to that symbol
• Spans 3+ files → _cross/<slug>.md
• Project-wide convention → _prefs.md
• Only create shadows for base-codebase files — experiment-only files don't get shadows (the branch IS the artifact). Anchor findings to the existing code they relate to.

Cross-Cutting Discoveries

When you see the same behavior in 3+ files, create a _cross/<slug>.md rather than repeating the discovery in each per-file shadow. Add back-pointers in each file's ## Cross-References section.

Discovery Quality

Discoveries must be self-contained process knowledge — understandable with just the base codebase. Someone reading main's shadow should understand the insight without checking out the dream branch. Capture how to do it, what you learned, and what to avoid — not what was built. The branch preserves the artifact; the shadow preserves the wisdom.

Good (behavioral insights about existing code):

• "functools.lru_cache is not thread-safe for initialization — two threads can trigger duplicate expensive computations on first call."
• "agent.py's retry loop catches all exceptions including OOM, masking fatal errors that should crash immediately."
• "To add a new eval metric, register in METRIC_MAP at metrics.py:25 and implement the Metric interface — missing either causes a silent no-op in the pipeline."

Bad (descriptions of new code):

• "The implemented PluginFramework has PluginRegistry, PluginManager, and 7 lifecycle hooks." — describes branch-only artifact.
• "Provides RewardShaper with 4 methods, Welford normalizer, and GAE-lambda estimation." — feature spec, not behavioral insight.
• "Complete tested module with 58 passing tests." — verdict, not discovery.

Per-file discoveries should reference the dream report:

- Retrying with exponential backoff recovers from 99% of transient errors,
  but must exclude 4xx or it retries bad requests for 30s.
  _(verified, source: exploration)_
  Dream report: `_dreams/20250612-143012Z-retry-logic/`

Write Discovery Manifest

After shadow writes, create .shadow/_dreams/$DREAM_ID/manifest.json:

{
  "dream_id": "<DREAM_ID>",
  "branch": "<BRANCH_NAME>",
  "parent_branch": "main",
  "category": "bug hunting",
  "verdict": "useful",
  "title": "CSV Parser Edge Cases",
  "discoveries": [
    {
      "op": "add",
      "anchor": "src/parsers/csv.py::parse_row",
      "text": "Unescaped quotes in fields cause silent truncation.",
      "status": "verified",
      "source": "exploration",
      "labels": ["bug"],
      "also_involves": ["src/parsers/utils.py::unescape"],
      "dream_report": "_dreams/<DREAM_ID>/"
    }
  ],
  "cross_cutting": []
}

Anchor format: file::symbol with bare names (no backticks). The reconciler handles normalization.

Manifest op values: only add is supported by the reconciler today. update and refute are reserved keywords — dream-validate.py will reject any discovery whose op is not add. To revise or contradict an existing discovery, run a meditate session against main's .shadow/ instead of trying to do it from a dream branch.

Hard gate — discoveries must be mirrored into per-file shadows. The reconciler merges manifest.json entries into main directly (so discoveries are not lost at merge time), but the branch's per-file shadows must ALSO be updated so human PR reviewers can read the discoveries in context. If manifest.json declares discoveries but no .shadow/*.md files outside _dreams/ are modified in the branch diff vs base_commit, dream-validate.py rejects the dream. Always write each discovery into BOTH the corresponding per-file shadow (or .shadow/_cross/) AND the manifest before staging.

Save Dream Report

Save as .shadow/_dreams/$DREAM_ID/report.md:

---
dream_id: "<DREAM_ID>"
category: bug hunting
verdict: useful
base_commit: "<BASE_COMMIT>"
branch: "<BRANCH_NAME>"
parent_branch: "main"
remote: "origin"
related_symbols:
  - "src/parsers/csv.py::parse_row"
builds_on: []
---

# CSV Parser Edge Cases

## Motivation
<cite specific existing files/symbols where gap was identified>

## Compounding Delta
<ONLY if parent_branch != main — what parent code was modified/extended>

## Hypothesis
<what we expected to learn>

## Implementation
<key decisions, approach>

## Commands Run
<exact commands with exit codes>

## Evaluation
<results, what worked/didn't>

## Takeaways
<lessons, gotchas>

## Verdict Details
<why useful/dead_end>

tip_commit is NOT in the report. Including the final commit SHA creates a chicken-and-egg problem (SHA changes when report is committed). The reconciler derives it via git rev-parse origin/$BRANCH and records it in _dreams/_index.md.

Verdict is the agent's assessment (set once, immutable):

• useful — produced actionable findings, working code, or valuable lessons
• dead_end — approach doesn't work; documented why so future dreams skip

Validate, Commit, Push

cd "$WORKTREE_DIR"

# 1. Generate diff (exclude .shadow/ and common build artifacts)
git add -A -- ':!.dream_parent' ':!__pycache__/' ':!.pytest_cache/'
git commit -m "dream: $SLUG"
mkdir -p .shadow/_dreams/"$DREAM_ID"
git diff "$BASE_COMMIT" HEAD -- \
    ':!.shadow/' ':!__pycache__/' ':!*.pyc' ':!.pytest_cache/' \
    ':!node_modules/' ':!*.lock' ':!dist/' ':!build/' \
    > .shadow/_dreams/"$DREAM_ID"/patch.diff
[ ! -s .shadow/_dreams/"$DREAM_ID"/patch.diff ] && echo "WARNING: Empty diff"

# 2. Validate (hard gate — must pass before push)
VALIDATE_SCRIPT=""
for DIR in .github/skills/shadow-frog-dream .claude/skills/shadow-frog-dream; do
    [ -f "$DIR/dream-validate.py" ] && VALIDATE_SCRIPT="$DIR/dream-validate.py" && break
done
if [ -n "$VALIDATE_SCRIPT" ]; then
    python3 "$VALIDATE_SCRIPT" "$DREAM_ID" "$WORKTREE_DIR" || {
        # If validate fails: read the script to understand what checks failed,
        # fix the issues it reports, then re-run. The script checks artifact
        # structure, manifest schema, and report frontmatter.
        echo "FIX ERRORS"; exit 1
    }
else
    # Script not found — inline fallback (minimal checks)
    [ ! -d ".shadow/_dreams/$DREAM_ID" ] && echo "ERROR: Missing dir" && exit 1
    for F in report.md manifest.json patch.diff; do
        [ ! -f ".shadow/_dreams/$DREAM_ID/$F" ] && echo "ERROR: Missing $F" && exit 1
    done
fi

# 3. Final commit and push
git add -A -- ':!.dream_parent'
git commit -m "dream: $SLUG — final with report and manifest"
if git push origin "$BRANCH_NAME"; then
    echo "Pushed: $BRANCH_NAME"
else
    echo "ERROR: Push failed. Keep worktree for recovery."
    exit 1
fi

Do NOT write to .session-branches.txt — that is managed by the orchestrator after all agents complete. Agents only push their branch; the orchestrator discovers pushed branches from the remote.

Worktree Cleanup

bash "$SKILL_DIR/dream-cleanup.sh" "$WORKTREE_DIR" --repo-root "$REPO_ROOT"

dream-cleanup.sh does the equivalent of git worktree remove --force followed by git worktree prune, but ALSO falls back to a safety-gated rm -rf if git worktree remove silently fails — the failure mode that leaked tens of dream worktrees per AFK session under the previous inline snippet (see bug-worktree-leak.md). The rm fallback ONLY fires for paths that match ${DREAM_WORKTREE_BASE:-/tmp/shadowfrog-dreams}/<ns>/dream-<slug> exactly; any other path is refused.

Remove as you go. If push failed, keep the worktree.

Mid-Session Diversity Check

After completing roughly half of your planned tasks, pause and review:

1. Count unique primary target files explored so far. If fewer than 50% of completed tasks targeted distinct files, remaining tasks MUST target new files.
2. Check for re-exploration — are any completed tasks exploring files already well-covered before this session? Swap remaining tasks for uncovered ones.
3. Review coverage map delta — if fewer than 2 previously uncovered files explored, prioritize uncovered files for remaining tasks.
4. Adjust the plan — swap, add, or reorder remaining tasks. The plan is a starting point, not a contract.

This prevents the fixation failure mode where the first half discovers a rich area and the second half keeps digging there instead of spreading.

Phase 4: AFK-Safe Patterns

1. Worktrees are outside the repo — writes don't trigger approval
2. Temp scripts go in /tmp/shadow-dream-<slug>.*
3. Never modify main directly — only during reconciliation
4. Clean up worktrees after push
5. Shadow writes on dream branches are safe

Phase 5: Parallel Agent Rules

1. Each agent targets different files (orchestrator assigns non-overlapping sets)
2. Each agent gets its own branch (inherently isolated)
3. Each agent writes its own manifest in its $DREAM_ID/ directory
4. Do NOT write to main or shared files (_index.md, state.json)
5. Do NOT update metadata — reconciled post-dream by orchestrator
6. Fetch once, branch from Phase 1 snapshot (no independent fetches)
7. Manifest anchors use bare symbol names (reconciler normalizes)
8. Thread RUN_PREFIX into every subagent prompt
9. Include WORKTREE_BASE and DREAM_NS in every subagent prompt
10. Dream artifacts MUST use subdirectory format — flat files are a completion criteria violation (see Critical Invariants → Artifact Format)

Phase 6: Reconcile to Main

⚠️ CRITICAL: Reconciliation is MANDATORY at the end of every dream batch. See Critical Invariants → Reconciliation is Mandatory (above) for the parallel-vs-sequential mode definitions and the auto-discover rule. Do NOT defer reconciliation across batches.

The _index.md entry is your sequential-mode checkpoint — any dream listed there is safe if the session crashes.

Use the reconciliation script:

cd "$REPO_ROOT"
git checkout "$DEFAULT_BRANCH"
git fetch origin --prune

# Find and run the reconciliation script
RECONCILE_SCRIPT=""
for DIR in .github/skills/shadow-frog-dream .claude/skills/shadow-frog-dream; do
    [ -f "$DIR/dream-reconcile.py" ] && RECONCILE_SCRIPT="$DIR/dream-reconcile.py" && break
done

if [ -n "$RECONCILE_SCRIPT" ]; then
    python3 "$RECONCILE_SCRIPT" "$REPO_ROOT"
else
    echo "WARNING: dream-reconcile.py not found. Apply Script Failure Recovery: read dream-reconcile.py source, adapt its 9 steps manually."
fi

If the reconciler script fails or errors: Read dream-reconcile.py source to understand which step broke and why. The script is structured as 9 sequential, idempotent steps (see below). You can often fix the issue and re-run the script (it skips dreams already in _index.md), or perform the failing step manually and then re-run the remaining steps. Common failures: missing manifest, corrupt report frontmatter, merge conflict in shadow file. Adapt based on the error message.

What the Reconciler Does

1. Discovers new branches (namespace-filtered, not in _index.md)
2. Reads/validates manifests from remote branches
3. Merges discoveries into main's per-file shadows (semantic dedup; on an exact-text duplicate it upgrades the existing entry's metadata — unions labels, raises source trust, promotes uncertain→verified — but never alters a refuted status)
4. Mirrors reports, manifests, patches to main's _dreams/
5. Updates _dreams/_index.md with new entries
6. Updates _meta/state.json
7. Rebuilds top-level .shadow/_index.md (per-file discovery counts)
8. Verifies all artifacts present (hard gate)
9. (Optional) Deletes reconciled branches — only with --cleanup-branches, and only after the reconciliation has been committed and pushed (refuses on a dirty .shadow/ or when HEAD is not yet on origin/<default-branch>)

After Reconciliation: Commit, Push, and Cleanup

cd "$REPO_ROOT"
git add .shadow/
git commit -m "dream: reconcile $(date -u +%Y%m%d-%H%M%SZ) — N experiments"
git pull --rebase origin "$DEFAULT_BRANCH" || {
    echo "ERROR: Rebase failed. Abort and retry manually."
    git rebase --abort 2>/dev/null
    exit 1
}
if git push origin "$DEFAULT_BRANCH"; then
    echo "✓ Pushed reconciliation"
else
    echo "ERROR: Push failed. Retry: git pull --rebase && git push"
    echo "⚠️ Do NOT clean up branches until push succeeds."
    exit 1
fi

Post-Reconciliation Branch Cleanup

After reconciliation is committed AND pushed, clean up dream branches to prevent repo pollution. Only delete branches whose artifacts are safely on main.

for BRANCH in $RECONCILED_BRANCHES; do
    DREAM_ID="${BRANCH#dream/${DREAM_NS}/}"
    # Safety check: verify artifacts exist on main BEFORE deleting.
    # Match the _index.md entry by EXACT cell (column 2), not substring —
    # `grep -qF "$DREAM_ID"` would false-match when one dream_id is a prefix
    # of another, deleting an un-reconciled branch.
    if [ -f .shadow/_dreams/"$DREAM_ID"/report.md ] && \
       [ -f .shadow/_dreams/"$DREAM_ID"/manifest.json ] && \
       [ -f .shadow/_dreams/"$DREAM_ID"/patch.diff ] && \
       awk -F'|' -v id="$DREAM_ID" \
         '{gsub(/ /,"",$2); if ($2==id) f=1} END {exit !f}' \
         .shadow/_dreams/_index.md 2>/dev/null; then
        # Safe to delete — all artifacts are on main
        git push origin --delete "$BRANCH" 2>/dev/null && \
            echo "  🗑 Deleted remote: $BRANCH"
        git branch -D "$BRANCH" 2>/dev/null && \
            echo "  🗑 Deleted local: $BRANCH"
    else
        echo "  ⚠️ KEEPING $BRANCH — artifacts not verified on main"
    fi
done

Rules:

• NEVER delete branches before push to main succeeds
• NEVER delete branches that have un-r

…(truncated)