Kicad Schematic

KiCAD Schematic Design Workflow

This skill guides Claude to design schematics using Konnect MCP tools. ALL modifications go through MCP tools — never edit .kicad_sch files directly.

Toolset Loading

Before any schematic work, load the required toolsets:

load_toolset('sch_components')   # place, move, rotate, delete symbols
load_toolset('sch_wiring')       # wires, net labels, power symbols, connections
load_toolset('sch_analysis')     # connection validation, short and orphan checks
load_toolset('sch_export')       # direct ERC and rendered schematic evidence
load_toolset('project')          # save_project before formal checks

Load additional toolsets as needed:

load_toolset('library')          # search_symbols, get_symbol_info, list_symbol_libraries
load_toolset('sch_batch')        # batch operations for 3+ items

Always call get_active_toolsets() first to see what is already loaded.

Component Placement

Read references/common-lib-ids.md when choosing a common generic KiCad symbol. It is a quick-start index, not an allowlist; search the active libraries when the required part is absent or package-specific.

Workflow

1. Search the library first: use search_symbols to find the correct lib_id
2. Get pin info: use get_symbol_info to see pin names, numbers, and positions
3. Place on the 1.27mm grid (KiCAD default schematic grid)
4. Verify placement with list_schematic_components

Package-sensitive and custom parts

Before placing or wiring a custom symbol, a manufacturer-specific discrete, or any package whose view can be mirrored, require the kicad-library skill's accepted physical pin map for the exact MPN and package suffix. The map must join each datasheet lead to the symbol pin and footprint pad, identify the drawing view/direction, reconcile duplicate and mechanical pads, and include query-back plus disposable rendered inspection. get_symbol_info proves the library data that exists; it does not prove that data matches the package.

If the accepted physical pin map is missing, incomplete, based on a different suffix, or ambiguous about top/bottom/mating view, stop before real schematic placement. Do not infer physical numbering from a generic symbol name or from the order pins appear on screen.

Common Library IDs

Rotation Conventions

• 0 degrees: default orientation (pins left/right)
• 90 degrees: rotated CCW (useful for vertical components)
• 180 degrees: flipped horizontally
• 270 degrees: rotated CW

Power symbols: GND uses 0 (arrow points down), VCC/VDD/+3V3/+5V use 0 (arrow points up).

Spacing Guidelines

• Between ICs: 30-50mm horizontal, 20-30mm vertical
• Between passive components: 10-15mm
• Between a decoupling cap and its IC: 5-10mm
• Leave room for wiring: minimum 5mm between component pins and other elements

Wiring

Read references/wiring-patterns.md when choosing between direct wires and labels or when building one of its common subcircuits. Verify every named pin against the placed symbol before applying a pattern.

Connection Methods — Decision Table

connect_pins

Use for direct pin-to-pin connections. The tool auto-routes with L-bends.

connect_pins(schematic, ref1, pin1, ref2, pin2)

• Specify pins by pin number (from get_schematic_pin_locations)
• Works best when pins are nearby and facing each other
• Automatically creates wire segments with proper bends

connect_to_net

Use for named nets. Creates a short stub wire and attaches a net label.

connect_to_net(schematic, reference, pin_number, net)

• Preferred for signals that connect to 3+ pins
• Preferred for named buses and control signals
• Keeps schematic clean and readable
• Net name must be consistent across all connections
• Name the pin rather than passing pin_x/pin_y: the stub then points away from the symbol body on its own, instead of the label text running back across the pin names. Override with direction only to fix a layout clash.
• batch_connect_to_net does the same for many pins in one read/write, and places its labels directly on the pin endpoints without stubs.
• Placing a label by hand with add_schematic_net_label instead? Take its rotation from orientation_degrees in get_schematic_pin_locations, or the text reads back across the symbol's pin names.
• These labels are sheet-local. In a sheet placed more than once, each instance gets its own independent copy of the net — right for per-instance signals, wrong for a rail every instance must share. A shared rail takes add_power_symbol or add_schematic_net_label with label_type: global_label; both are one net across all sheets and instances.

add_power_symbol

Use for all power connections, in preference to labelling a pin with the rail name. The one exception is a rail that must stay separate per instance of a repeated sheet — see below.

add_power_symbol(schematic, power_net, x, y, rotation?)

• Takes coordinates, not a reference and pin number. Place it on the pin endpoint (from get_schematic_pin_locations) — a power symbol carries its pin at its own origin, so the two coinciding is the connection.
• power_net is loaded as power:<power_net>, so it must name a symbol in KiCad's power library: +3V3 and +12V, never 3V3 or 12V. A miss is an error and nothing is placed.
• rotation defaults to 0 — see Rotation Conventions above.
• A power pin landing mid-segment on a wire gets its junction dot automatically, in either order: symbol onto an existing wire, or a wire routed across an already-placed symbol.
• Power symbols are global: every +5V symbol on every sheet, and in every instance of a sheet, joins one +5V net. A rail that must stay separate per instance of a repeated sheet (each node's own 5V, say) takes a local net label via connect_to_net instead — power:+5V there shorts all the instances' rails together.

Batch Operations

Load sch_batch toolset when placing 3 or more components or making bulk connections.

batch_place_components

Place multiple components in one call. Provide schematic and a components array of {lib_id, x, y, rotation?, reference?, value?, unit?} objects. Pass reference explicitly for each component -- it is not auto-assigned.

batch_connect_to_net

Connect multiple pins to the same net in one call. Ideal for:

• Connecting all VCC pins on an IC
• Connecting all GND pins
• Bus signals across multiple ICs

batch_edit_schematic_components

Bulk-modify component properties (values, footprints, fields) across multiple components.

When to Use Batch vs Individual

• 1-2 components: individual calls
• 3+ components: batch operations
• Mixed operations (place + wire): do placement batch first, then wiring batch

Common Patterns

Decoupling Capacitor

Place 100nF cap (Device:C) within 5mm of IC power pin. Connect one pin to VCC via power symbol, other pin to GND via power symbol. One cap per VCC/VDD pin.

Pull-up Resistor

Place resistor (Device:R) vertically. Connect one pin to the signal net via connect_to_net, other pin to VCC via add_power_symbol. Typical values: 4.7k for I2C, 10k for general.

Voltage Divider

Two resistors in series, vertically aligned. Top to input net, middle junction to output net, bottom to GND. Use connect_to_net for input/output, add_power_symbol for GND.

LED with Current-Limiting Resistor

Resistor in series with LED. Connect resistor to signal/power, resistor to LED anode, LED cathode to GND. R = (Vsupply - Vf) / If. Typical: 330R for 3.3V, 470R for 5V.

Bypass/Decoupling Filter

For analog circuits: 100nF ceramic + 10uF electrolytic in parallel, close to power pins. Place ceramic closest to IC.

Crystal Oscillator

Crystal (Device:Crystal) between XI and XO pins. Two load capacitors from each crystal pin to GND. Typical load caps: 12-22pF. Optional 1M feedback resistor across crystal.

Post-Placement Verification

After placing components and wiring, always run these checks:

annotate_schematic

Assigns reference designators (R1, C1, U1, etc.) to all unannotated components. Run after all placement is complete.

validate_wire_connections

Checks that all wires connect properly to pins. Reports:

• Dangling wire ends
• Wires that miss pins
• Overlapping wires

validate_component_connections

Verifies that components have the expected connections. Reports:

• Unconnected pins that should be connected
• Missing power connections

find_orphan_items

Finds floating wires, labels, and symbols that are not connected to anything.

Verification Workflow

1. Place and wire complete functional blocks.
2. Run annotate_schematic, then save with save_project.
3. Run validate_wire_connections and validate_component_connections.
4. Run find_shorted_nets; reconcile each finding against the intended nets.
5. Run find_orphan_items as a heuristic and corroborate its findings.
6. Run direct KiCad ERC with run_erc and classify every violation.
7. Run render_schematic_png with inline output and inspect the actual image.
8. Fix findings and repeat every check invalidated by the edits.

Visual feedback loop

The agent can see its own schematic. After meaningful edits:

1. render_schematic_png — rasterize the sheet (pass inline true to get the image back as base64 and actually look at it).
2. set_visual_baseline — capture the known-good render before a batch of edits (stored under the project's own state directory with the source hash and renderer identity).
3. compare_visual_baseline — after edits: PASS/DRIFT against a 2% content threshold with the changed region's bounding box. "No baseline stored" is a normal state, and a baseline from an older renderer is flagged rather than silently trusted.

Use the loop to catch what connectivity checks cannot. Completion requires coherent functional grouping, label-inclusive overlap inspection, clear signal flow, and page-boundary acceptance for every symbol, label, and note. Inspect the image itself; a successful render command is not visual acceptance.

Evidence and completion gate

Apply this order when evidence disagrees:

1. Exact requirements and manufacturer datasheets.
2. Direct KiCad ERC and saved/exported connectivity.
3. Direct net, short, pin, and component evidence from Konnect.
4. Aggregate review results.
5. Heuristic orphan, single-pin, decoupling, and best-practice findings.

A weaker heuristic may raise a question but does not override stronger direct evidence. If any required check did not run, failed structurally, returned impossible coverage, or contradicts stronger evidence without resolution, the result is INCOMPLETE. Report the blocked evidence and stop short of a clean or production-ready claim.

Rules

1. Never edit .kicad_sch files directly — all changes go through MCP tools
2. Never guess pin numbers — always use get_schematic_pin_locations or get_symbol_info to look up pin numbers before connecting
3. Always verify after changes — run validation tools after placing and wiring
4. Use the grid — all placements on 1.27mm grid
5. Search before placing — use search_symbols to confirm lib_id exists
6. Power symbols for power — use add_power_symbol for rails, not net labels; the exception is a rail that must stay separate per instance of a repeated sheet, which takes a local label because power symbols are global
7. Net labels for named signals — keeps schematics readable
8. Save frequently — call save_project after major operations
9. Load toolsets first — check get_active_toolsets() and load what you need before starting
10. Batch for bulk — use batch toolset for 3+ repetitive operations