Resend CLI
Installation
Before running any resend commands, check whether the CLI is installed:
resend --version
If the command is not found, install it using one of the methods below:
cURL (macOS / Linux):
curl -fsSL https://resend.com/install.sh | bash
Homebrew (macOS / Linux):
brew install resend/cli/resend
Node.js:
npm install -g resend-cli
PowerShell (Windows):
irm https://resend.com/install.ps1 | iex
After installing, verify:
resend --version
Agent Protocol
The CLI auto-detects non-TTY environments and outputs JSON — no --json flag needed.
Rules for agents:
Authentication
Auth resolves: --api-key flag > RESEND_API_KEY env > config file (resend login --key). Use --profile or RESEND_PROFILE for multi-profile.
Global Flags
| Flag |
Description |
--api-key <key> |
Override API key for this invocation |
-p, --profile <name> |
Select stored profile |
--json |
Force JSON output (auto in non-TTY) |
-q, --quiet |
Suppress spinners/status (implies --json) |
Available Commands
| Command Group |
What it does |
emails |
send, get, list, batch, cancel, update |
emails receiving |
list, get, attachments, forward, listen |
domains |
create, verify, update, delete, list |
logs |
list, get, open |
api-keys |
create, list, delete |
automations |
create, get, list, update, delete, stop, open, runs |
events |
create, get, list, update, delete, send, open |
broadcasts |
create, send, update, delete, list |
contacts |
create, update, delete, segments, topics |
contact-properties |
create, update, delete, list |
segments |
create, get, list, delete, contacts |
templates |
create, publish, duplicate, delete, list |
topics |
create, update, delete, list |
webhooks |
create, update, listen, delete, list |
auth |
login, logout, switch, rename, remove |
whoami / doctor / update / open / commands |
Utility commands |
Read the matching reference file for detailed flags and output shapes.
Dry-run: Only emails send and broadcasts create support --dry-run (payload validation before send/create). They print { "dryRun": true, "request": { ... } } on stdout without calling the API. There is no --dry-run on emails batch, broadcasts send, or other commands yet.
Common Mistakes
| # |
Mistake |
Fix |
| 1 |
Forgetting --yes on delete commands |
All delete/rm subcommands require --yes in non-interactive mode — otherwise the CLI exits with an error |
| 2 |
Not saving webhook signing_secret |
webhooks create shows the secret once only — it cannot be retrieved later. Capture it from command output immediately |
| 3 |
Omitting --quiet in CI |
Without -q, spinners and status text still go to stderr (not stdout). Use -q for JSON on stdout with no spinner noise on stderr |
| 4 |
Using --scheduled-at with batch |
Batch sending does not support scheduled_at — use single emails send instead |
| 5 |
Expecting domains list to include DNS records |
List returns summaries only — use domains get <id> for the full records[] array |
| 6 |
Sending a dashboard-created broadcast via CLI |
Only API-created broadcasts can be sent with broadcasts send — dashboard broadcasts must be sent from the dashboard |
| 7 |
Passing --events to webhooks update expecting additive behavior |
--events replaces the entire subscription list — always pass the complete set |
| 8 |
Expecting logs list to include request/response bodies |
List returns summary fields only — use logs get <id> for full request_body and response_body |
Common Patterns
Send an email:
resend emails send --from "you@domain.com" --to user@example.com --subject "Hello" --text "Body"
Send a React Email template (.tsx):
resend emails send --from "you@domain.com" --to user@example.com --subject "Welcome" --react-email ./emails/welcome.tsx
Domain setup flow:
resend domains create --name example.com --region us-east-1
# Configure DNS records from output, then:
resend domains verify <domain-id>
resend domains get <domain-id> # check status
Create and send a broadcast:
resend broadcasts create --from "news@domain.com" --subject "Update" --segment-id <id> --html "<h1>Hi</h1>" --send
CI/CD (no login needed):
RESEND_API_KEY=re_xxx resend emails send --from ... --to ... --subject ... --text ...
Check environment health:
resend doctor -q
When to Load References
- Sending or reading emails → references/emails.md
- Setting up or verifying a domain → references/domains.md
- Managing API keys → references/api-keys.md
- Creating or sending broadcasts → references/broadcasts.md
- Managing contacts, segments, or topics → references/contacts.md, references/segments.md, references/topics.md
- Defining contact properties → references/contact-properties.md
- Working with templates → references/templates.md
- Viewing API request logs → references/logs.md
- Creating automations or sending events → references/automations.md
- Setting up webhooks or listening for events → references/webhooks.md
- Auth, profiles, or health checks → references/auth.md
- Multi-step recipes (setup, CI/CD, broadcast workflow) → references/workflows.md
- Command failed with an error → references/error-codes.md
- Resend SDK integration (Node.js, Python, Go, etc.) → Install the
resend skill
- AI agent email inbox → Install the
agent-email-inbox skill
1---2name: resend-cli3description: Operate the Resend platform from the terminal — send emails (including React Email .tsx templates via --react-email), manage domains, contacts, broadcasts, templates, webhooks, API keys, logs, automations, and events via the `resend` CLI. Use when the user wants to run Resend commands in the shell, scripts, or CI/CD pipelines, or send/preview React Email templates. Always load this skill before running `resend` commands — it contains the non-interactive flag contract and gotchas that prevent silent failures.4license: MIT5---67# Resend CLI89## Installation1011Before running any `resend` commands, check whether the CLI is installed:1213```bash14resend --version15```1617If the command is not found, install it using one of the methods below:1819**cURL (macOS / Linux):**20```bash21curl -fsSL https://resend.com/install.sh | bash22```2324**Homebrew (macOS / Linux):**25```bash26brew install resend/cli/resend27```2829**Node.js:**30```bash31npm install -g resend-cli32```3334**PowerShell (Windows):**35```powershell36irm https://resend.com/install.ps1 | iex37```3839After installing, verify:40```bash41resend --version42```4344## Agent Protocol4546The CLI auto-detects non-TTY environments and outputs JSON — no `--json` flag needed.4748**Rules for agents:**49- Supply ALL required flags. The CLI will NOT prompt when stdin is not a TTY.50- Pass `--quiet` (or `-q`) to suppress spinners and status messages.51- Exit `0` = success, `1` = error.52- Error JSON goes to stderr, success JSON goes to stdout:53 ```json54 {"error":{"message":"...","code":"..."}}55 ```56- Use `--api-key` or `RESEND_API_KEY` env var. Never rely on interactive login.57- All `delete`/`rm` commands require `--yes` in non-interactive mode.5859## Authentication6061Auth resolves: `--api-key` flag > `RESEND_API_KEY` env > config file (`resend login --key`). Use `--profile` or `RESEND_PROFILE` for multi-profile.6263## Global Flags6465| Flag | Description |66|------|-------------|67| `--api-key <key>` | Override API key for this invocation |68| `-p, --profile <name>` | Select stored profile |69| `--json` | Force JSON output (auto in non-TTY) |70| `-q, --quiet` | Suppress spinners/status (implies `--json`) |7172## Available Commands7374| Command Group | What it does |75|--------------|-------------|76| `emails` | send, get, list, batch, cancel, update |77| `emails receiving` | list, get, attachments, forward, listen |78| `domains` | create, verify, update, delete, list |79| `logs` | list, get, open |80| `api-keys` | create, list, delete |81| `automations` | create, get, list, update, delete, stop, open, runs |82| `events` | create, get, list, update, delete, send, open |83| `broadcasts` | create, send, update, delete, list |84| `contacts` | create, update, delete, segments, topics |85| `contact-properties` | create, update, delete, list |86| `segments` | create, get, list, delete, contacts |87| `templates` | create, publish, duplicate, delete, list |88| `topics` | create, update, delete, list |89| `webhooks` | create, update, listen, delete, list |90| `auth` | login, logout, switch, rename, remove |91| `whoami` / `doctor` / `update` / `open` / `commands` | Utility commands |9293Read the matching reference file for detailed flags and output shapes.9495**Dry-run:** Only `emails send` and `broadcasts create` support `--dry-run` (payload validation before send/create). They print `{ "dryRun": true, "request": { ... } }` on stdout without calling the API. There is no `--dry-run` on `emails batch`, `broadcasts send`, or other commands yet.9697## Common Mistakes9899| # | Mistake | Fix |100|---|---------|-----|101| 1 | **Forgetting `--yes` on delete commands** | All `delete`/`rm` subcommands require `--yes` in non-interactive mode — otherwise the CLI exits with an error |102| 2 | **Not saving webhook `signing_secret`** | `webhooks create` shows the secret once only — it cannot be retrieved later. Capture it from command output immediately |103| 3 | **Omitting `--quiet` in CI** | Without `-q`, spinners and status text still go to stderr (not stdout). Use `-q` for JSON on stdout with no spinner noise on stderr |104| 4 | **Using `--scheduled-at` with batch** | Batch sending does not support `scheduled_at` — use single `emails send` instead |105| 5 | **Expecting `domains list` to include DNS records** | List returns summaries only — use `domains get <id>` for the full `records[]` array |106| 6 | **Sending a dashboard-created broadcast via CLI** | Only API-created broadcasts can be sent with `broadcasts send` — dashboard broadcasts must be sent from the dashboard |107| 7 | **Passing `--events` to `webhooks update` expecting additive behavior** | `--events` replaces the entire subscription list — always pass the complete set |108| 8 | **Expecting `logs list` to include request/response bodies** | List returns summary fields only — use `logs get <id>` for full `request_body` and `response_body` |109110## Common Patterns111112**Send an email:**113```bash114resend emails send --from "you@domain.com" --to user@example.com --subject "Hello" --text "Body"115```116117**Send a React Email template (.tsx):**118```bash119resend emails send --from "you@domain.com" --to user@example.com --subject "Welcome" --react-email ./emails/welcome.tsx120```121122**Domain setup flow:**123```bash124resend domains create --name example.com --region us-east-1125# Configure DNS records from output, then:126resend domains verify <domain-id>127resend domains get <domain-id> # check status128```129130**Create and send a broadcast:**131```bash132resend broadcasts create --from "news@domain.com" --subject "Update" --segment-id <id> --html "<h1>Hi</h1>" --send133```134135**CI/CD (no login needed):**136```bash137RESEND_API_KEY=re_xxx resend emails send --from ... --to ... --subject ... --text ...138```139140**Check environment health:**141```bash142resend doctor -q143```144145## When to Load References146147- **Sending or reading emails** → [references/emails.md](references/emails.md)148- **Setting up or verifying a domain** → [references/domains.md](references/domains.md)149- **Managing API keys** → [references/api-keys.md](references/api-keys.md)150- **Creating or sending broadcasts** → [references/broadcasts.md](references/broadcasts.md)151- **Managing contacts, segments, or topics** → [references/contacts.md](references/contacts.md), [references/segments.md](references/segments.md), [references/topics.md](references/topics.md)152- **Defining contact properties** → [references/contact-properties.md](references/contact-properties.md)153- **Working with templates** → [references/templates.md](references/templates.md)154- **Viewing API request logs** → [references/logs.md](references/logs.md)155- **Creating automations or sending events** → [references/automations.md](references/automations.md)156- **Setting up webhooks or listening for events** → [references/webhooks.md](references/webhooks.md)157- **Auth, profiles, or health checks** → [references/auth.md](references/auth.md)158- **Multi-step recipes** (setup, CI/CD, broadcast workflow) → [references/workflows.md](references/workflows.md)159- **Command failed with an error** → [references/error-codes.md](references/error-codes.md)160- **Resend SDK integration** (Node.js, Python, Go, etc.) → Install the [`resend`](https://github.com/resend/resend-skills) skill161- **AI agent email inbox** → Install the [`agent-email-inbox`](https://github.com/resend/resend-skills) skill
motormetrics