Printing Press Import

/printing-press-import

Bring a published CLI from the public library (mvanhorn/printing-press-library) into the internal library at $PRESS_LIBRARY/ so it matches the form the generator would produce. Manuscripts ride along.

/printing-press-import notion
/printing-press-import cal.com
/printing-press-import allrecipes --from-clone ~/Code/printing-press-library

The internal library is the working copy; the public library is the durable artifact. After import, the CLI is ready for polish, emboss, or re-publish — the publish step will re-apply the module path rewrites.

When to run

• The public library has a CLI you don't have locally
• The internal copy is broken, lost, or out of sync
• You want a clean baseline before running polish on a published CLI

If the user is asking to polish a CLI and mentions "in/from the public library" or "from the repo", suggest running this skill first.

Setup

PRESS_HOME="${PRINTING_PRESS_HOME:-$HOME/printing-press}"
PRESS_LIBRARY="$PRESS_HOME/library"
PRESS_MANUSCRIPTS="$PRESS_HOME/manuscripts"
SCRIPTS_DIR="$(dirname "${BASH_SOURCE[0]:-.}")/references"

if ! command -v go >/dev/null 2>&1; then
  echo ""
  echo "[setup-error] Go toolchain not found."
  echo ""
  echo "This Printing Press flow runs Go-based build or validation commands."
  echo "Install Go 1.26.6 or newer from https://go.dev/dl/, then verify with:"
  echo "  go version"
  echo "Then re-run this skill."
  echo ""
  return 1 2>/dev/null || exit 1
fi

_pp_check_disk_space() {
  _pp_disk_warn_kb="${PRINTING_PRESS_DISK_WARN_KB:-3145728}"
  _pp_disk_fail_kb="${PRINTING_PRESS_DISK_FAIL_KB:-524288}"
  case "$_pp_disk_warn_kb$_pp_disk_fail_kb" in
    ""|*[!0-9]*) return 0 ;;
  esac

  _pp_disk_path="$PRESS_HOME"
  while [ ! -e "$_pp_disk_path" ] && [ "$_pp_disk_path" != "/" ]; do
    _pp_disk_path="$(dirname "$_pp_disk_path")"
  done

  _pp_disk_avail_kb="$(df -Pk "$_pp_disk_path" 2>/dev/null | awk 'BEGIN {
    if ((getline header) <= 0 || (getline record) <= 0) exit
    field_count = split(record, fields)
    if (field_count >= 4) print fields[4]
  }')"
  case "$_pp_disk_avail_kb" in
    ""|*[!0-9]*) return 0 ;;
  esac

  if [ "$_pp_disk_avail_kb" -lt "$_pp_disk_fail_kb" ]; then
    echo ""
    echo "[setup-error] Critically low disk space on the Printing Press workspace volume."
    echo "PRESS_DISK_PATH=$_pp_disk_path"
    echo "PRESS_DISK_AVAIL_KB=$_pp_disk_avail_kb"
    echo "PRESS_DISK_FAIL_KB=$_pp_disk_fail_kb"
    echo "Free disk space or set PRINTING_PRESS_HOME to a volume with more room, then re-run this skill."
    echo ""
    return 1
  fi

  if [ "$_pp_disk_avail_kb" -lt "$_pp_disk_warn_kb" ]; then
    echo ""
    echo "[low-disk] Printing Press workspace volume is low on free space."
    echo "PRESS_DISK_PATH=$_pp_disk_path"
    echo "PRESS_DISK_AVAIL_KB=$_pp_disk_avail_kb"
    echo "PRESS_DISK_WARN_KB=$_pp_disk_warn_kb"
    echo "This flow may need several GiB for generated files, Go build cache, module downloads, or repository clones."
    echo ""
  fi
}
_pp_check_disk_space || { return 1 2>/dev/null || exit 1; }

The four reference scripts live alongside this SKILL.md under references/:

• import-fetch.sh <library-path> <staging> [--clone <path>]
• import-backup.sh <api-slug> (prints zip path on stdout)
• import-rewrite.sh <staging> <api-slug>
• import-place.sh <staging> <api-slug>

If setup emitted [low-disk], surface the advisory to the user and continue unless setup also emitted [setup-error]. [low-disk] means this run may need several GiB for repository clones, staged files, backups, Go build cache, or module downloads.

Phase 1 — Resolve the CLI

The argument can be anything natural: an API slug (notion), a brand name (cal.com), an old CLI name (notion-pp-cli), or close enough (Allrecipes). Resolve via the public library's registry.json — which carries name, category, api, description, and path for every entry, in one fetch.

REGISTRY=$(mktemp)
gh api -H "Accept: application/vnd.github.v3.raw" \
  repos/mvanhorn/printing-press-library/contents/registry.json \
  > "$REGISTRY"

Match in this order:

1. Exact name match — jq --arg q "$ARG" '.entries[] | select(.name == $q)' "$REGISTRY"
2. Normalized exact — strip -pp-cli suffix, lowercase, dot→hyphen, then exact match
3. Substring on name or description — case-insensitive contains

# Exact:
jq --arg q "$ARG" '.entries[] | select(.name == $q)' "$REGISTRY"

# Normalized exact (after $ARG2 = lowercase, dot→hyphen, suffix-stripped):
jq --arg q "$ARG2" '.entries[] | select(.name == $q)' "$REGISTRY"

# Fuzzy (substring on name or description):
jq --arg q "$ARG2" '.entries[]
  | select((.name | ascii_downcase | contains($q | ascii_downcase))
        or (.description | ascii_downcase | contains($q | ascii_downcase)))
' "$REGISTRY"

If you get one match: use it. If multiple: present at most 4 to the user via AskUserQuestion showing name + description per candidate. If zero: tell the user the public library doesn't have that CLI.

The matched entry gives you everything you need:

• LIB_PATH from .path (e.g., library/productivity/cal-com)
• API_SLUG from .name
• CATEGORY from .category

Don't slurp whole files when reasoning over candidates. The fields above are enough; if you genuinely need more, the per-CLI manifest is just <LIB_PATH>/manifest.json and the description there can be pulled the same way (gh api -H "Accept: ... raw" .../manifest.json | jq -r '.description').

Phase 2 — Decide on overwrite

Check whether the internal library already has this CLI:

LIB_TARGET="$PRESS_LIBRARY/$API_SLUG"
MAN_TARGET="$PRESS_MANUSCRIPTS/$API_SLUG"

If neither exists: straightforward import — proceed to Phase 3.

If either exists: read provenance from both sides to decide whether to overwrite. Don't read whole .printing-press.json files — pull just the fields that matter:

# Internal provenance (if present):
jq '{run_id, generated_at, printing_press_version, spec_checksum}' \
  "$LIB_TARGET/.printing-press.json" 2>/dev/null

# Public provenance (one-shot via raw):
gh api -H "Accept: application/vnd.github.v3.raw" \
  repos/mvanhorn/printing-press-library/contents/$LIB_PATH/.printing-press.json \
  | jq '{run_id, generated_at, printing_press_version, spec_checksum}'

Reason over the diff:

• Same run_id — public is the same generation as internal. Likely no-op; ask before clobbering. If the user wants to import anyway (e.g., to recover from a broken internal copy), proceed.
• Public newer generated_at — public has changes the internal doesn't. Importing is the safe move; ask the user to confirm.
• Internal newer generated_at — internal has work the public doesn't (in-progress polish, manual fixes). Importing would clobber that. Stop and surface this to the user — they likely want to publish the internal changes first.
• Either side missing .printing-press.json — older or hand-imported. Ask the user.

When the user confirms overwrite, the backup step in Phase 3 captures the current internal state.

Phase 3 — Import

STAGING=$(mktemp -d)

# Fetch (remote unless --from-clone was passed)
if [[ -n "${CLONE_PATH:-}" ]]; then
  bash "$SCRIPTS_DIR/import-fetch.sh" "$LIB_PATH" "$STAGING" --clone "$CLONE_PATH"
else
  bash "$SCRIPTS_DIR/import-fetch.sh" "$LIB_PATH" "$STAGING"
fi

# Backup if anything is being clobbered. Prints zip path on stdout.
if [[ -d "$LIB_TARGET" || -d "$MAN_TARGET" ]]; then
  BACKUP_ZIP=$(bash "$SCRIPTS_DIR/import-backup.sh" "$API_SLUG")
  echo "Backed up to: $BACKUP_ZIP"
fi

# Reverse the publish-step module path rewrites.
bash "$SCRIPTS_DIR/import-rewrite.sh" "$STAGING" "$API_SLUG"

# Atomically move staging into place.
bash "$SCRIPTS_DIR/import-place.sh" "$STAGING" "$API_SLUG"

Phase 4 — Verify internal consistency

After the move, confirm the imported CLI builds and is structurally intact. Treat any failure as a real problem — don't paper over it.

cd "$LIB_TARGET"

# Module path is local form
grep -q "^module ${API_SLUG}-pp-cli\$" go.mod \
  || { echo "FAIL: go.mod still on public module path"; exit 1; }

# No public module path leaked into source
if grep -rq "github.com/mvanhorn/printing-press-library/library" \
   --include='*.go' --include='*.yaml' --include='*.yml' .; then
  echo "FAIL: source still references public module path"
  exit 1
fi

# Build
go build ./... \
  || { echo "FAIL: go build"; exit 1; }

# Doctor (self-check)
make doctor 2>/dev/null \
  || ./bin/${API_SLUG}-pp-cli doctor 2>/dev/null \
  || true   # best-effort; not all CLIs have doctor wired the same way

Report the import outcome:

• Source path (from registry: <category>/<api-slug>)
• Run ID (from .printing-press.json)
• Manuscripts run-ids placed (count + names)
• Backup zip path (if any)
• Build status

Polish-side hint

If the user's request to import was triggered by a polish ask (e.g., they said "polish notion in the public library"), suggest:

Imported $API_SLUG. To polish: /printing-press-polish $API_SLUG

The polish skill operates on the internal library, so import-then-polish is the right flow when starting from a published CLI.