Walrus Troubleshooting

Walrus Troubleshooting

Source constraint: Errors and fixes in this skill are sourced from the Walrus documentation, the Walrus GitHub repository, and confirmed community support patterns. When extending, verify errors are reproducible before adding.

This skill collects the most common errors users encounter when working with Walrus, organized by tool. Each entry includes the error message, cause, and fix.

Related skills

Skill Content

CLI errors

spawn walrus ENOENT or command not found: walrus

Cause: The walrus binary is not installed or not in your PATH.

Fix:

curl -sSfL https://raw.githubusercontent.com/Mystenlabs/suiup/main/install.sh | sh
suiup install walrus

If already installed, add ~/.suiup/bin to your PATH. Restart your shell after installation.

Cannot find gas coin for signer address

Cause: The wallet has no SUI tokens. Walrus operations require SUI for gas fees.

Fix:

• Testnet: Run sui client faucet to get test SUI.
• Mainnet: Acquire SUI through an exchange and transfer to the wallet address.

Check your balance with sui client gas.

Error: missing configuration or No configuration file found

Cause: The CLI cannot find client_config.yaml.

Fix:

curl --create-dirs https://docs.wal.app/setup/client_config.yaml \
  -o ~/.config/walrus/client_config.yaml

Or specify the path explicitly: walrus --config /path/to/client_config.yaml store ...

Testnet blobs disappearing quickly

Cause: Testnet epochs are shorter than mainnet epochs. Storing with low epoch counts means blobs expire sooner than expected.

Fix: Use walrus info to check the current epoch duration. Use generous epoch values on testnet (30+). On mainnet, 1 epoch = 14 days.

suiup switch walrus 1.48.1 fails

Cause: Wrong syntax. suiup uses network-based versioning, not version numbers.

Fix:

suiup install walrus@mainnet
# or
suiup install walrus@testnet

TypeScript SDK errors

ChainNotSupportedError: The account does not support the chain "sui:undefined"

Cause: The dApp Kit wallet adapter does not have the correct network configured. The SDK cannot determine which Sui chain to use.

Fix: Ensure the dApp Kit provider specifies the chain:

<SuiClientProvider networks={{ testnet: { url: getFullnodeUrl('testnet') } }} defaultNetwork="testnet">

And that the wallet is connected to the same network.

file.bytes is not a function

Cause: Passing a raw string or JavaScript object to storeBlob instead of binary data.

Fix: Convert to Uint8Array first:

// WRONG
await client.walrus.storeBlob({ blob: myJsonString, epochs: 5 });

// CORRECT
await client.walrus.storeBlob({
  blob: new TextEncoder().encode(myJsonString),
  epochs: 5,
});

The blob parameter expects Uint8Array, File, Blob, or ReadableStream.

Tip amount (N) exceeds the maximum allowed tip (M)

Cause: The upload relay requires a tip higher than your configured maximum. The default sendTip.max is too low for the relay you are using.

Fix: Increase the sendTip.max value in your upload relay configuration:

uploadRelay: {
  host: 'https://upload-relay.mainnet.walrus.space',
  sendTip: { max: 5_000_000 },  // increase as needed
},

Check the relay's required tip: curl <relay-url>/v1/tip-config

RetryableWalrusClientError: Too many failures while writing blob

Cause: The SDK failed to distribute slivers to enough storage nodes. Common causes:

• No upload relay configured for a browser environment
• Network connectivity issues to storage nodes
• Storage nodes temporarily unavailable

Fix:

1. In a browser, configure an upload relay (see walrus-ts-sdk skill).
2. Check network connectivity.
3. Retry with exponential backoff.
4. If persistent, try a different upload relay or wait for storage node recovery.

BlobNotCertifiedError

Cause: The blob was registered on-chain but has not yet received enough confirmations from storage nodes. The availability certificate has not been submitted.

Fix: The blob is not yet at its Point of Availability (PoA). Wait for certification to complete. If it never completes, the upload may have failed partway through. Retry the store operation.

Vite build errors with @mysten/walrus

Cause: Vite's dependency pre-bundling breaks the SDK's gRPC and WASM imports.

Fix: Exclude the package from optimization:

// vite.config.ts
export default defineConfig({
  optimizeDeps: {
    exclude: ['@mysten/walrus'],
  },
});

HTTP API errors

413 Payload Too Large

Cause: The publisher has a maximum request body size. Public testnet publishers limit uploads to approximately 10 MiB.

Fix:

• For files larger than the publisher limit, use the CLI, TypeScript SDK, or run your own publisher.
• On mainnet, there are no public publishers. Use the upload relay or SDK directly.

404 Not Found immediately after uploading

Cause: CDN caching on the aggregator. The aggregator's CDN cached a 404 from before the blob propagated.

Fix: Retry with exponential backoff. The blob should become available within seconds to minutes after certification. If using a CDN-fronted aggregator, the cache TTL determines the delay.

Move integration errors

VMVerificationOrDeserializationError in command 0

Cause: The published Move package does not match the on-chain Walrus contracts. This is almost always a Move.toml dependency issue.

Fix: Check these in order:

1. Wrong subdir for the network. Testnet uses testnet-contracts/walrus, mainnet uses contracts/walrus.

   # Testnet
   Walrus = { git = "https://github.com/MystenLabs/walrus.git", rev = "testnet", subdir = "testnet-contracts/walrus" }
   
   # Mainnet
   Walrus = { git = "https://github.com/MystenLabs/walrus.git", rev = "main", subdir = "contracts/walrus" }
   

2. Wrong rev. The commit must match what is deployed on-chain. Use the testnet branch for testnet, main for mainnet, or pin to a specific commit.

3. Stale Move.lock. Delete Move.lock and rebuild: rm Move.lock && sui move build.

4. Wrong edition. Use edition = "2024", not "2024.beta".

EWrongVersion (abort code 1) from system::inner_mut

Cause: Calling a Walrus system function using an old package ID after a Walrus upgrade. Walrus uses versioned shared objects.

Fix:

• If using the CLI or SDK: Update to the latest version. The client automatically refreshes package IDs.
• If calling contracts directly: Query the system_object to find the current package ID. Do not hardcode package IDs.
• The Walrus client code has built-in retry logic: on EWrongVersion, it calls refresh_package_id() and retries.

Seal errors

Transaction was not signed by the correct sender

Cause: The PTB passed to Seal does not have tx.setSender(address) set, or the sender does not match the decrypting address.

Fix:

tx.setSender(address);  // Must match the decrypting wallet address

Connected wallet does not support Seal session signing

Cause: The connected wallet does not implement the session signing protocol required by Seal for multi-signature decryption flows.

Fix: Use a wallet that supports Seal sessions, or implement manual per-signature approval in your decryption flow.

Network / general errors

ERR_CERT_COMMON_NAME_INVALID on storage node connections

Cause: TLS certificate mismatch on a storage node. The node's certificate does not match the expected hostname.

Fix: This is typically a storage node operator issue. Try a different aggregator or wait for the operator to fix their TLS configuration. If using the CLI, it should automatically fall back to other nodes.

client/server api version mismatch

Cause: The installed walrus binary version does not match the network's expected version.

Fix:

suiup update walrus
# or install the version matching your network
suiup install walrus@mainnet

Rules

1. Check Move.toml first for Move errors. VMVerificationOrDeserializationError is almost always a dependency issue.
2. Check token balances for "gas coin" errors. Both SUI and WAL are required for write operations.
3. Configure upload relay for browser apps. SDK write operations in a browser require an upload relay.
4. Delete Move.lock when switching dependency revisions. Stale lock files cause build failures.
5. Use walrus info to verify network connectivity and configuration. If walrus info works, your config is correct.
6. Update the CLI when you see version mismatch errors. Run suiup update walrus.