Setup

NanoClaw Setup

Run setup steps automatically. Only pause when user action is required (channel authentication, configuration choices). Setup uses bash setup.sh for bootstrap, then npx tsx setup/index.ts --step <name> for all other steps. Steps emit structured status blocks to stdout. Verbose logs go to logs/setup.log.

Principle: When something is broken or missing, fix it. Don't tell the user to go fix it themselves unless it genuinely requires their manual action (e.g. authenticating a channel, pasting a secret token). If a dependency is missing, install it. If a service won't start, diagnose and repair. Ask the user for permission when needed, then do the work.

UX Note: Use AskUserQuestion for all user-facing questions.

0. Git & Fork Setup

Check the git remote configuration to ensure the user has a fork and upstream is configured.

Run:

• git remote -v

Case A — origin points to qwibitai/nanoclaw (user cloned directly):

The user cloned instead of forking. AskUserQuestion: "You cloned NanoClaw directly. We recommend forking so you can push your customizations. Would you like to set up a fork?"

• Fork now (recommended) — walk them through it
• Continue without fork — they'll only have local changes

If fork: instruct the user to fork qwibitai/nanoclaw on GitHub (they need to do this in their browser), then ask them for their GitHub username. Run:

git remote rename origin upstream
git remote add origin https://github.com/<their-username>/nanoclaw.git
git push --force origin main

Verify with git remote -v.

If continue without fork: add upstream so they can still pull updates:

git remote add upstream https://github.com/qwibitai/nanoclaw.git

Case B — origin points to user's fork, no upstream remote:

Add upstream:

git remote add upstream https://github.com/qwibitai/nanoclaw.git

Case C — both origin (user's fork) and upstream (qwibitai) exist:

Already configured. Continue.

Verify: git remote -v should show origin → user's repo, upstream → qwibitai/nanoclaw.git.

1. Bootstrap (Node.js + Dependencies + OneCLI)

Run bash setup.sh and parse the status block.

• If NODE_OK=false → Node.js is missing or too old. Use AskUserQuestion: Would you like me to install Node.js 22? If confirmed:
  • macOS: brew install node@22 (if brew available) or install nvm then nvm install 22
  • Linux: curl -fsSL https://deb.nodesource.com/setup_22.x | sudo -E bash - && sudo apt-get install -y nodejs, or nvm
  • After installing Node, re-run bash setup.sh
• If DEPS_OK=false → Read logs/setup.log. Try: delete node_modules, re-run bash setup.sh. If native module build fails, install build tools (xcode-select --install on macOS, build-essential on Linux), then retry.
• If NATIVE_OK=false → better-sqlite3 failed to load. Install build tools and re-run.
• Record PLATFORM and IS_WSL for later steps.

After bootstrap succeeds, install OneCLI and its CLI tool:

curl -fsSL onecli.sh/install | sh
curl -fsSL onecli.sh/cli/install | sh

Verify both installed: onecli version. If the command is not found, the CLI was likely installed to ~/.local/bin/. Add it to PATH for the current session and persist it:

export PATH="$HOME/.local/bin:$PATH"
# Persist for future sessions (append to shell profile if not already present)
grep -q '.local/bin' ~/.bashrc 2>/dev/null || echo 'export PATH="$HOME/.local/bin:$PATH"' >> ~/.bashrc
grep -q '.local/bin' ~/.zshrc 2>/dev/null || echo 'export PATH="$HOME/.local/bin:$PATH"' >> ~/.zshrc

Then re-verify with onecli version.

Point the CLI at the local OneCLI instance (it defaults to the cloud service otherwise):

onecli config set api-host http://127.0.0.1:10254

Ensure .env has the OneCLI URL (create the file if it doesn't exist):

grep -q 'ONECLI_URL' .env 2>/dev/null || echo 'ONECLI_URL=http://127.0.0.1:10254' >> .env

2. Check Environment

Run npx tsx setup/index.ts --step environment and parse the status block.

• If HAS_AUTH=true → WhatsApp is already configured, note for step 5
• If HAS_REGISTERED_GROUPS=true → note existing config, offer to skip or reconfigure
• Record APPLE_CONTAINER and DOCKER values for step 3

2a. Timezone

Run npx tsx setup/index.ts --step timezone and parse the status block.

• If NEEDS_USER_INPUT=true → The system timezone could not be autodetected (e.g. POSIX-style TZ like IST-2). AskUserQuestion: "What is your timezone?" with common options (America/New_York, Europe/London, Asia/Jerusalem, Asia/Tokyo) and an "Other" escape. Then re-run: npx tsx setup/index.ts --step timezone -- --tz <their-answer>.
• If STATUS=success → Timezone is configured. Note RESOLVED_TZ for reference.

3. Container Runtime

3a. Choose runtime

Check the preflight results for APPLE_CONTAINER and DOCKER, and the PLATFORM from step 1.

• PLATFORM=linux → Docker (only option)
• PLATFORM=macos + APPLE_CONTAINER=installed → Use AskUserQuestion: Docker (cross-platform) or Apple Container (native macOS)? If Apple Container, run /convert-to-apple-container now, then skip to 3c.
• PLATFORM=macos + APPLE_CONTAINER=not_found → Docker

3a-docker. Install Docker

• DOCKER=running → continue to 4b
• DOCKER=installed_not_running → start Docker: open -a Docker (macOS) or sudo systemctl start docker (Linux). Wait 15s, re-check with docker info.
• DOCKER=not_found → Use AskUserQuestion: Docker is required for running agents. Would you like me to install it? If confirmed:
  • macOS: install via brew install --cask docker, then open -a Docker and wait for it to start. If brew not available, direct to Docker Desktop download at https://docker.com/products/docker-desktop
  • Linux: install with curl -fsSL https://get.docker.com | sh && sudo usermod -aG docker $USER. Note: user may need to log out/in for group membership.

3b. Apple Container conversion gate (if needed)

If the chosen runtime is Apple Container, you MUST check whether the source code has already been converted from Docker to Apple Container. Do NOT skip this step. Run:

grep -q "CONTAINER_RUNTIME_BIN = 'container'" src/container-runtime.ts && echo "ALREADY_CONVERTED" || echo "NEEDS_CONVERSION"

If NEEDS_CONVERSION, the source code still uses Docker as the runtime. You MUST run the /convert-to-apple-container skill NOW, before proceeding to the build step.

If ALREADY_CONVERTED, the code already uses Apple Container. Continue to 3c.

If the chosen runtime is Docker, no conversion is needed. Continue to 3c.

3c. Build and test

Run npx tsx setup/index.ts --step container -- --runtime <chosen> and parse the status block.

If BUILD_OK=false: Read logs/setup.log tail for the build error.

• Cache issue (stale layers): docker builder prune -f (Docker) or container builder stop && container builder rm && container builder start (Apple Container). Retry.
• Dockerfile syntax or missing files: diagnose from the log and fix, then retry.

If TEST_OK=false but BUILD_OK=true: The image built but won't run. Check logs — common cause is runtime not fully started. Wait a moment and retry the test.

4. Anthropic Credentials via OneCLI

NanoClaw uses OneCLI to manage credentials — API keys are never stored in .env or exposed to containers. The OneCLI gateway injects them at request time.

Check if a secret already exists:

onecli secrets list

If an Anthropic secret is listed, confirm with user: keep or reconfigure? If keeping, skip to step 5.

AskUserQuestion: Do you want to use your Claude subscription (Pro/Max) or an Anthropic API key?

1. Claude subscription (Pro/Max) — description: "Uses your existing Claude Pro or Max subscription. You'll run claude setup-token in another terminal to get your token."
2. Anthropic API key — description: "Pay-per-use API key from console.anthropic.com."

Subscription path

Tell the user to run claude setup-token in another terminal and copy the token it outputs. Do NOT collect the token in chat.

Once they have the token, they register it with OneCLI. AskUserQuestion with two options:

1. Dashboard — description: "Best if you have a browser on this machine. Open http://127.0.0.1:10254 and add the secret in the UI. Use type 'anthropic' and paste your token as the value."
2. CLI — description: "Best for remote/headless servers. Run: onecli secrets create --name Anthropic --type anthropic --value YOUR_TOKEN --host-pattern api.anthropic.com"

API key path

Tell the user to get an API key from https://console.anthropic.com/settings/keys if they don't have one.

Then AskUserQuestion with two options:

1. Dashboard — description: "Best if you have a browser on this machine. Open http://127.0.0.1:10254 and add the secret in the UI."
2. CLI — description: "Best for remote/headless servers. Run: onecli secrets create --name Anthropic --type anthropic --value YOUR_KEY --host-pattern api.anthropic.com"

After either path

Ask them to let you know when done.

If the user's response happens to contain a token or key (starts with sk-ant-): handle it gracefully — run the onecli secrets create command with that value on their behalf.

After user confirms: verify with onecli secrets list that an Anthropic secret exists. If not, ask again.

5. Set Up Channels

AskUserQuestion (multiSelect): Which messaging channels do you want to enable?

• WhatsApp (authenticates via QR code or pairing code)
• Telegram (authenticates via bot token from @BotFather)
• Slack (authenticates via Slack app with Socket Mode)
• Discord (authenticates via Discord bot token)

Delegate to each selected channel's own skill. Each channel skill handles its own code installation, authentication, registration, and JID resolution. This avoids duplicating channel-specific logic and ensures JIDs are always correct.

For each selected channel, invoke its skill:

• WhatsApp: Invoke /add-whatsapp
• Telegram: Invoke /add-telegram
• Slack: Invoke /add-slack
• Discord: Invoke /add-discord

Each skill will:

1. Install the channel code (via git merge of the skill branch)
2. Collect credentials/tokens and write to .env
3. Authenticate (WhatsApp QR/pairing, or verify token-based connection)
4. Register the chat with the correct JID format
5. Build and verify

After all channel skills complete, install dependencies and rebuild — channel merges may introduce new packages:

npm install && npm run build

If the build fails, read the error output and fix it (usually a missing dependency). Then continue to step 6.

6. Mount Allowlist

AskUserQuestion: Agent access to external directories?

No: npx tsx setup/index.ts --step mounts -- --empty Yes: Collect paths/permissions. npx tsx setup/index.ts --step mounts -- --json '{"allowedRoots":[...],"blockedPatterns":[],"nonMainReadOnly":true}'

7. Start Service

If service already running: unload first.

• macOS: launchctl unload ~/Library/LaunchAgents/com.nanoclaw.plist
• Linux: systemctl --user stop nanoclaw (or systemctl stop nanoclaw if root)

Run npx tsx setup/index.ts --step service and parse the status block.

If FALLBACK=wsl_no_systemd: WSL without systemd detected. Tell user they can either enable systemd in WSL (echo -e "[boot]\nsystemd=true" | sudo tee /etc/wsl.conf then restart WSL) or use the generated start-nanoclaw.sh wrapper.

If DOCKER_GROUP_STALE=true: The user was added to the docker group after their session started — the systemd service can't reach the Docker socket. Ask user to run these two commands:

1. Immediate fix: sudo setfacl -m u:$(whoami):rw /var/run/docker.sock
2. Persistent fix (re-applies after every Docker restart):

sudo mkdir -p /etc/systemd/system/docker.service.d
sudo tee /etc/systemd/system/docker.service.d/socket-acl.conf << 'EOF'
[Service]
ExecStartPost=/usr/bin/setfacl -m u:USERNAME:rw /var/run/docker.sock
EOF
sudo systemctl daemon-reload

Replace USERNAME with the actual username (from whoami). Run the two sudo commands separately — the tee heredoc first, then daemon-reload. After user confirms setfacl ran, re-run the service step.

If SERVICE_LOADED=false:

• Read logs/setup.log for the error.
• macOS: check launchctl list | grep nanoclaw. If PID=- and status non-zero, read logs/nanoclaw.error.log.
• Linux: check systemctl --user status nanoclaw.
• Re-run the service step after fixing.

8. Verify

Run npx tsx setup/index.ts --step verify and parse the status block.

If STATUS=failed, fix each:

• SERVICE=stopped → npm run build, then restart: launchctl kickstart -k gui/$(id -u)/com.nanoclaw (macOS) or systemctl --user restart nanoclaw (Linux) or bash start-nanoclaw.sh (WSL nohup)
• SERVICE=not_found → re-run step 7
• CREDENTIALS=missing → re-run step 4 (check onecli secrets list for Anthropic secret)
• CHANNEL_AUTH shows not_found for any channel → re-invoke that channel's skill (e.g. /add-telegram)
• REGISTERED_GROUPS=0 → re-invoke the channel skills from step 5
• MOUNT_ALLOWLIST=missing → npx tsx setup/index.ts --step mounts -- --empty

Tell user to test: send a message in their registered chat. Show: tail -f logs/nanoclaw.log

Troubleshooting

Service not starting: Check logs/nanoclaw.error.log. Common: wrong Node path (re-run step 7), OneCLI not running (check curl http://127.0.0.1:10254/api/health), missing channel credentials (re-invoke channel skill).

Container agent fails ("Claude Code process exited with code 1"): Ensure the container runtime is running — open -a Docker (macOS Docker), container system start (Apple Container), or sudo systemctl start docker (Linux). Check container logs in groups/main/logs/container-*.log.

No response to messages: Check trigger pattern. Main channel doesn't need prefix. Check DB: npx tsx setup/index.ts --step verify. Check logs/nanoclaw.log.

Channel not connecting: Verify the channel's credentials are set in .env. Channels auto-enable when their credentials are present. For WhatsApp: check store/auth/creds.json exists. For token-based channels: check token values in .env. Restart the service after any .env change.

Unload service: macOS: launchctl unload ~/Library/LaunchAgents/com.nanoclaw.plist | Linux: systemctl --user stop nanoclaw

9. Diagnostics

Send diagnostics data by following .claude/skills/setup/diagnostics.md.