Telegram Setup

Telegram Setup for Dojo Dojo

This skill is your playbook when a user asks Dojo to set up Telegram on their machine and you cannot see the project source. Walk them through the Personal bots flow first — it is the recommended product path. Only fall back to Group setup if they explicitly want shared/team visibility.

Mental model (read first)

Dojo Engine has two Telegram flavors. Only one is active at a time:

Hard rules to enforce in your guidance:

• The user selects exactly one flavor in Settings → Remote Access & Notifications → Telegram. The other flavor’s saved keys stay on disk but are dormant.
• The top Enabled switch is the master kill switch for Telegram.
• Personal mode pairs each Dojo lane (Primary, Secondary) to its own private Telegram bot. Each lane is independent — they can configure just Primary, just Secondary, or both.
• Group mode reuses one bot in two Telegram groups, with chat IDs.
• Dojo doesn’t care which flavor feeds it. It routes by Primary/Secondary role.
• PIN and wake-word features were removed from the product. Do not ask the user about them.

If you ever see PIN/wake-word in screenshots or older docs, treat them as out-of-date and skip.

Personal bots (recommended flow)

Per-lane outcome

After setup, each lane the user configures will have:

• one Telegram bot they created via BotFather
• the bot paired to their personal Telegram account via a one-time /dojo:pair <code> message
• Dojo accepting inbound only from that paired private chat, and sending outbound to that same paired chat

No groups. No admin rights. No privacy-mode toggles. No chat ID hunting. No getUpdates.

Walk the user through this

For each lane the user wants (start with Primary):

1. Open BotFather

   • In Telegram, open @BotFather (verified blue checkmark).

2. Create a bot

   • Send /newbot.
   • Display name: anything (e.g. Dojo Primary or Val Dojo).
   • Username: must end in _bot (e.g. val_dojo_primary_bot). Try variants if taken.

3. Copy the bot token

   • BotFather returns a token like 123456789:ABC....
   • Treat it like a password. Do not echo it in chat. Don’t commit it.

4. Open Dojo Settings

   • Dojo Engine → Settings → Remote Access & Notifications → Telegram.
   • Make sure the Personal bots card is selected (it shows the small green checkmark).

5. Paste the token

   • Paste into Primary private bot (or Secondary private bot for the secondary lane).
   • Click Connect.

6. Pair the bot

   • Dojo shows a pairing dialog with a command like /dojo:pair 482913.
   • The dialog has Open bot in Telegram and a copy icon.
   • In Telegram, open the new bot and send the exact /dojo:pair <code>.
   • Return to Dojo and click Check pairing.
   • On success Dojo saves the private chat and shows Connected to <Name> (@username) in green.

7. Save and enable

   • Make sure the top Enabled switch is on.
   • Click Save.

8. Smoke test

   • In the bot chat send hey or any short message.
   • Dojo Primary should respond and Telegram should show a reply.
   • The pairing-only chat is the only chat that can reach Dojo through this bot.

Repeat for Secondary if the user wants it. Skipping Secondary is fine.

Remote control while on the move

Once a lane is paired, these commands work in that bot chat:

3 / 4 toggle the per-lane flag, not the master switch. The master Enabled switch in Settings is the only way to disable the whole Telegram integration.

What you’re telling the user is happening behind the scenes

• Dojo verifies the bot token via Telegram getMe.
• Dojo generates a 6-digit pairing code.
• Dojo polls bot updates and looks for a private message from a real Telegram user whose text is exactly /dojo:pair <code>.
• It stores chatId, userId, bot username, and pairedAt.
• Inbound messages are then accepted only when: token matches, chat type is private, chat ID matches, and sender user ID matches.
• Outbound goes to the same paired chat.

Group setup (advanced flow)

Use this only when the user explicitly wants a team/observer/demo experience. It is more work and exposes group access-control decisions to the user.

High level:

• 1 Telegram bot via BotFather (privacy mode disabled).
• 2 Telegram groups (Primary, Secondary), bot added as admin to both.
• Capture each group’s chat ID (negative -100…).
• Paste token + chat IDs into the Group setup card.

Walk them through it

1. Create the bot — @BotFather → /newbot. Copy the token.
2. Disable privacy mode — BotFather → /setprivacy → select the bot → Disable.
   • If the bot was already in a group, remove and re-add it. Telegram only applies the new privacy setting on re-join.
3. Create two groups in Telegram:
   • Dojo Dojo (P) for Primary
   • Dojo Dojo (S) for Secondary
4. Add the bot to both groups and promote to admin. Bot needs to read messages and post replies.
5. Get each chat ID (negative -100…). Two reliable methods:
   • Send a message in the group, then open: https://api.telegram.org/bot<BOT_TOKEN>/getUpdates Look for chat.id and chat.title matching the group. Copy the negative number.
   • Or use a chat-ID helper bot the user trusts.
6. Lock down the groups (optional but recommended) — restrict who can send messages, especially if it’s a private group meant for one user.
7. Open Dojo Settings → Telegram:
   • Select the Group setup card.
   • Paste the bot token into Group Bot Token.
   • Paste Primary Chat ID and Secondary Chat ID.
   • Click Test next to each chat to verify a message arrives.
8. Save and turn the top Enabled switch on.

Group safety guidance

• Private group: discoverable only by invite link. Recommended for solo users using groups.
• Public group: anyone can search/join. Dojo will show a one-time informational notice and continue working — the user is responsible for membership.
• If the user wants the group to be read-only for everyone except themselves and the bot, set group permissions accordingly.

Dojo Engine no longer enforces a PIN or wake-word for Telegram commands. Trust is delegated to Telegram group membership/permissions.

How to choose for the user

Ask: “Are you setting this up for just you, or do you want others to see/use Dojo through Telegram?”

• Just me → Personal bots.
• Team / observers / demos / shared → Group setup.
• Both → Configure Personal for daily use; Group only when they need shared visibility. Only one is active at a time. Saved keys for the other flavor stay on disk and can be flipped back later by switching the card and clicking Save.

Troubleshooting cheat sheet

If something’s still wrong: look at temp/dojo/logs/be/dojo-d-be-*.log. Telegram lines are prefixed 📨 TelegramService. Confirm there’s only one backend process talking to Telegram.

What you should never tell the user

• Don’t ask them to set a PIN. It was removed.
• Don’t ask them to set a wake word. It was removed.
• Don’t tell them they need both Personal and Group at once.
• Don’t tell them to delete their saved Group token when they switch to Personal — the app keeps both safely; the other flavor just goes dormant.
• Don’t paste their bot token back to them in chat. Have them paste it directly into the Settings field.

Optional: Telegram for Dojo Portal

If a user also wants Portal alerts (separate product from Dojo):

• They can create a separate Telegram bot or reuse one.
• Set TELEGRAM_BOT_TOKEN (and recipient chat ID) in Portal env.
• For one-way alerts, privacy mode can stay enabled.
• Disabling privacy mode is only required if Portal also reads replies.

This is independent of the Dojo flavor selected above.

BotFather quick reference

If a token leaks: /revoke immediately, then paste the new token into the same Primary private bot or Secondary private bot field and re-pair.