netvar1337 tracealyzer
Trace debuggee execution — stepping into or over calls — for a specified number of instructions or until a condition is met. The full instruction log is captured to a file and then analyzed.
Instructions
Follow these steps exactly:
1. Verify debugger connection
Call mcp__x64dbg__get_debugger_status to confirm the debugger is connected and a debuggee is loaded and paused. If it is running, call mcp__x64dbg__pause. If no debuggee is loaded, tell the user and stop.
2. Gather trace parameters
Ask the user for the following if not already provided:
- Trace mode: trace into calls or trace over calls (default: over)
- Stop condition — one of:
- A maximum number of instructions (e.g.
1000) - An x64dbg expression that stops when true (e.g.
cip == 0x7FF6A0001000,rax != 0) - Both (whichever triggers first)
- A maximum number of instructions (e.g.
If the user provides a symbol or address for the stop condition, resolve it with mcp__x64dbg__eval_expression and build the break_condition expression (e.g. cip == <resolved_addr>).
When the user only specifies a step count N and no explicit break condition, use break_condition 0 (never true — the trace runs until max_steps is hit).
3. Capture starting context
Call mcp__x64dbg__get_all_registers and mcp__x64dbg__disassemble at the current instruction pointer to record the starting state. Note the starting address.
4. Run the trace
Prepare the output log path: ./traces/trace_<timestamp>.log (create the traces directory if it doesn't exist via Bash).
Call the appropriate trace tool (mcp__x64dbg__trace_into or mcp__x64dbg__trace_over) with:
| Parameter | Value |
|---|---|
break_condition |
The user's condition, or 0 if only a step count was given |
max_steps |
The user's step count, or 50000 if only a condition was given |
log_text |
`{p:cip} {i:cip} |
log_file |
The output log path from above |
wait_timeout |
Scale with max_steps — use max(60, max_steps // 500) seconds |
5. Read and analyze the trace log
Read the trace log file. The log contains one line per executed instruction in the format:
<address> <disassembly> | Label=<label> Comment=<comment>
Ignore when Labels or Comments say [Formatting Error], it just means there is no label or comment at that instruction.
Analyze the trace and present a summary to the user:
- Trace overview: total instructions executed, start address → end address, trace mode used
- Execution flow: describe the high-level behavior — what the code did, which functions were called, loops observed, and notable control-flow patterns
- Hot spots: addresses or regions that appear most frequently (loops, repeated calls)
- Key observations: interesting register manipulations, memory accesses, syscalls, API calls, string operations, or anything else that stands out
Use mcp__x64dbg__get_symbol to resolve notable addresses to symbol names where possible.
If the trace log is very large (>2000 lines), read it in chunks and summarize progressively.
6. Follow-up actions
After presenting the summary, ask the user if they would like any follow-up actions such as:
- Annotate: add comments/labels in x64dbg at key addresses using
mcp__x64dbg__set_comment/mcp__x64dbg__set_label - Deeper analysis: re-trace a specific sub-region, or focus on a particular function
- Deobfuscation: identify and explain obfuscated patterns found in the trace
- Export: the trace log is already saved to disk at the path from step 4