Gpsd Knowledge Patch

gpsd Knowledge Patch

Use this skill for daemon deployment, protocol consumers, libgps clients, receiver configuration, PPS/NTP/chrony integration, capture and replay, and post-processing. Read the task-specific reference before relying on defaults or wire formats.

Reference index

Critical compatibility and security

• Use 3.27.1 or later for untrusted input. It fixes CVE-2025-67268 in NMEA2000 parsing and CVE-2025-67269 in NovAtel parsing.
• Do not infer API compatibility from the 3.27 release number alone. Version values were corrected in 3.27.3, changed to 16.1 in 3.27.4, and corrected again in 3.27.5.
• C clients must check GPSD_API_MAJOR_VERSION and GPSD_API_MINOR_VERSION; reject an unknown major version at build time.
• Keep the daemon, command-line clients, and libraries on the same GPSD version. Remove an old installation completely before switching between packages and source builds.
• The package named gpsd on PyPI is unrelated and obsolete; obtain GPSD from a distribution or its source tree.
• gps_send() is deprecated; use gps_stream() for watch policy. The older request/response gps_query() is removed, and the current streaming read API is gps_read().
• The Lexer() FFI interface was deprecated in October 2025. gpsmon is officially deprecated since 3.26, although it remains useful for low-level diagnostics.
• TPV alt is deprecated and undefined. Use altHAE or altMSL.
• GPSD's RTCM3 JSON dump is incomplete and buggy; never treat it as a production decoding interface.
• Since 3.26, u-blox, RTCM104v2, and RTCM104v3 drivers are unconditional. RTCM3.2 and chunked NTRIPv2 input are supported; SPARTNv2 is initial and disabled by default.

Daemon lifecycle and safe operation

GPSD is demand-driven unless -n/--nowait is used. A watch opens a pooled sensor; without nowait, an idle sensor is closed but stays available for later activation. Use nowait for reference-clock service.

There is no receiver-type or serial-settings configuration file. GPSD sniffs checksummed packets and hunts serial parameters. Driver selection can change packet by packet, and multiple protocols can share one wire.

Use -b when automatic baud changes or wake-up strings might wedge fragile hardware. -p suppresses automatic receiver configuration but still permits explicit changes; receiver settings changed by GPSD may persist after exit and generally cannot be restored automatically.

Useful startup and inspection commands:

gpsd -l
gpsd -D 5 -N -n /dev/ttyUSB0
gpsd -f 8O1 -s 115200 /dev/ttyUSB0

The local control socket processes one operation per line:

+/dev/ttyUSB0
-/dev/ttyUSB0
!/dev/ttyUSB0=<control-string>
&/dev/ttyUSB0=<paired-hex-digits>

Each operation returns OK or ERROR. + and - alter the device pool, ! writes a textual control string, and & writes hexadecimal binary data. A startup with no source requires -F; otherwise it fails.

SIGHUP closes all device and client connections, reconnects pooled devices, and resumes service. Clients must reconnect. Nonreading clients are detached; unassigned clients time out after 60 seconds, polling clients after 15 minutes, while watchers and raw clients have no inactivity timeout.

Data sources and hotplug

GPSD accepts serial/USB paths, /dev/ppsN alongside a local GPS, tcp://, listening udp://, authenticated ntrip://, dgpsip://, remote gpsd://, and Linux nmea2000:// SocketCAN sources. Configure CAN before starting GPSD.

The device hook is called on demand-driven transitions:

/etc/gpsd/device-hook <device> ACTIVATE
/etc/gpsd/device-hook <device> DEACTIVATE

With systemd socket activation, stopping gpsd.service is not enough; gpsd.socket can restart it. Stop both for manual debugging. If systemd owns port 2947, -G alone does not expose it remotely—change the socket listener and firewall as well.

JSON protocol essentials

Requests are US-ASCII, begin with ?, and are limited to 80 characters excluding newline. Responses end in CR-LF. The default maximum response is 10,240 characters including the terminator; reject a truncated response as invalid JSON.

?VERSION;?DEVICES;
?WATCH={"enable":true,"json":true,"device":"/dev/ttyUSB0"};

Every connection receives VERSION; validate both proto_major and proto_minor. Bare ?WATCH; reports policy. A WATCH change is followed by DEVICES; enable defaults true and json false.

Treat reports as incremental, presence-gated state:

• TPV.mode is always present, but several progressively populated TPVs can describe one epoch. Require a 2D/3D fix and initially three consecutive 3D fixes before trusting time.
• libgps uses NAN for unknown floating values; use isfinite().
• status refines rather than replaces mode. Gate every optional TPV field on presence.
• SKY.nSat counts array entries; uSat counts satellites used. Prefer gnssid plus svid over ambiguous NMEA-style PRNs.
• ATT is GNSS-epoch synchronized; IMU is emitted promptly and may have arbitrary or out-of-order device timestamps.
• TOFF and PPS pair source and host timestamps. PPS also carries precision, SHM key, and optional quantization error.
• POLL is cached, requires an active WATCH, and can expose a partially accumulated NMEA epoch or data one cycle stale.
• Raw level 1 passes NMEA/AIVDM and hex-dumps binary; level 2 emits binary verbatim. Neither raw mode dumps RTCM2/3.

Client implementation pattern

#include <gps.h>

struct gps_data_t gpsdata;
if (gps_open("localhost", DEFAULT_GPSD_PORT, &gpsdata) != 0) {
    /* inspect errno */
}
gps_stream(&gpsdata, WATCH_ENABLE | WATCH_JSON | WATCH_DEVICE,
           "/dev/ttyUSB0");

Link with -lgps; adding -lm is safe and is required on systems that do not propagate libgps's math dependency. Call gps_close() only after a successful open.

gps_read() can receive fragments, one object, or multiple objects plus a tail. libgps retains incomplete input and accumulates decoded fields in one gps_data_t blackboard. PACKET_SET only means at least one complete response arrived; compare timestamps and clear state deliberately when per-read semantics matter.

gps_waiting() takes microseconds and returns false for timeout or error; inspect errno. Drain more often than one report cycle, especially for AIS. Under WATCH_RAW, returned buffers need not be NUL-terminated.

Shared-memory mode uses GPSD_SHARED_MEMORY as the host. It has gps_fd == -1, immediate snapshots, and no device filtering, stream policy, activation notices, or packet notices. Prefer a simple gps_read() loop because waiting then reading races.

Python sessions expose stream(), read(), iteration, text in response, bytes in bresponse, and decoded key/attribute access in data:

import gps

session = gps.gps(host="localhost", port="2947")
session.stream(flags=gps.WATCH_JSON)
for report in session:
    print(report)

Receiver changes and ubxtool

Prefer daemon-mediated gpsctl for ordinary access. Use -f for direct access, with an explicit path and device write permission. Combined changes run in mode, baud, cycle, then control-string order. Reset must be standalone and include both -r and a forced -t TYPE.

For ubxtool, first poll MON-VER and set the exact protocol version; the default is 10 and can fail silently on newer receivers:

ubxtool -p MON-VER
export UBXOPTS="-P 27 -v 2"

Pre-Gen9 devices use compound UBX-CFG-*; Gen9 varies by firmware; Gen10+ uses configuration items. Item access needs protocol 27+. -g layer indexes are 0 RAM, 1 BBR, 2 flash, and 7 default; -z/-x layer masks use bits 1 RAM, 2 BBR, and 4 flash.

Always read back a write: NAK proves invalidity, ACK does not prove application, and some successful writes have no ACK. Choose port-specific CFG-MSGOUT-*_<port> keys on newer firmware. Prefer explicit persistent layers over legacy SAVE, because UBX-CFG-CFG is deprecated from protocol 23.01.

Precision timing

Hardware PPS over serial requires the pulse wired to DCD or RI and a handshake-capable cable. USB data alone does not carry PPS. Verify with gpsmon, ppscheck, and daemon debug level 5.

GPSD normally uses NTP SHM units 0/1 when privileged and 2/3 otherwise. Units 0/1 are private (0600); units 2+ are normally public (0666) and allow local sample injection. Match unit ownership to the threat model.

Chronyd must start before GPSD for SOCK transport. For SHM, set PPS precision explicitly because chronyd cannot obtain it from the SHM structure. Never deploy placeholder offsets such as 0.9999; measure a stable coarse-source offset for at least four hours.

NTPsec's native GPSD refclock supports in-band mode 0, strict PPS-plus-in-band mode 1, and experimental fallback mode 2. PPS-only secondary units are 128+ and depend on primary unit % 128.

Build and installation

SCons is single-phase: install can rebuild, so repeat the same feature options. Run tests before installation, and install Linux hotplug integration separately:

scons && scons check
scons install
scons udev-install

minimal=yes makes Boolean features default false, except NMEA0183 remains built. timeservice=yes forces nowait and PPS support but omits most receiver drivers, so explicitly enable the required binary driver.

For cross-builds, target is the toolchain prefix and sysroot supplies target headers/libraries. includedir changes only the install destination; use CPPFLAGS and LDFLAGS for prerequisite lookup.

Serial nodes normally need mode 0660 with a group matching compiled gpsd_group. Set gpsd_user and gpsd_group deliberately and ensure udev assigns the same group.

Capture, replay, and diagnosis

Use gpspipe -R for byte-exact capture; gpscat default output escapes nonprinting bytes and adds a newline. Replay with gpsfake, minimize failing logs, then verify decoder failures with gpsdecode.

gpspipe -R -n 100 > receiver.log
gpsfake -1 -P 2948 receiver.log
gpsdecode < receiver.log

gpsfake loops by default and creates one pseudo-TTY per log. Use -1 for one pass, -S for realistic pacing, and -P to avoid the production port. Leading #Serial:, #Transport:, # Date:, and Delay-Cookie headers control replay.

For offline RINEX, preserve raw bytes, decode to GPSD JSON, then pass the JSON file to gpsrinex -F. PPP collection needs supported raw observations and intact receiver configuration for the full run; 30-second epochs are the documented default cadence for long static captures.