Reduce Ssa Repro

Reduce SSA Reproduction

Minimize an SSA file that triggers a bug in the noir-ssa pipeline. Use after the bisect-ssa-pass skill has identified which passes cause the issue.

Setup

1. Build the noir-ssa CLI as a debug binary:

   cargo build -p noir_ssa_cli
   

   Always use debug builds (target/debug/noir-ssa). Many SSA invariant checks are #[cfg(debug_assertions)]-guarded and compiled out of release builds.

2. Set SKILL_DIR to this skill's directory (for script references):

   SKILL_DIR=<path-to-repo>/.claude/skills/reduce-ssa-repro
   

3. Gather from bisection:

   • The SSA file (input.ssa)
   • The passes that trigger the bug (corruption passes + detection pass)
   • The error pattern from stderr

1. Minimize the Pass Pipeline

Reduce the number of passes needed to trigger the bug. For each non-detection pass in the pipeline, try removing it:

# If the pipeline is: A → B → C → Detection
# Try removing each non-detection pass:
noir-ssa transform --source-path input.ssa --ssa-pass "B" --ssa-pass "C" --ssa-pass "Detection" -o /dev/null
noir-ssa transform --source-path input.ssa --ssa-pass "A" --ssa-pass "C" --ssa-pass "Detection" -o /dev/null
noir-ssa transform --source-path input.ssa --ssa-pass "A" --ssa-pass "B" --ssa-pass "Detection" -o /dev/null

When a pass produces valid output (not the buggy pass), bake it into the input to shrink both input and pipeline:

noir-ssa transform --source-path input.ssa --ssa-pass "A" -o after_A.ssa
# Verify crash reproduces without A:
noir-ssa transform --source-path after_A.ssa --ssa-pass "B" --ssa-pass "Detection" -o /dev/null
# If it still crashes:
cp after_A.ssa input.ssa

Repeat until no more passes can be removed.

2. Set Up the Reproduction Script

Use $SKILL_DIR/scripts/reproduce_crash.sh. It has two modes depending on whether SSA_PASSES is set:

Multi-pass mode — when corruption passes precede the detection pass:

SSA_PASSES="<pass>" DETECTION_PASS="<detection-pass>" $SKILL_DIR/scripts/reproduce_crash.sh input.ssa
SSA_PASSES="<pass-1>:<pass-2>" DETECTION_PASS="<detection-pass>" $SKILL_DIR/scripts/reproduce_crash.sh input.ssa

Validates: (1) input parses, (2) detection pass alone succeeds, (3) full pipeline crashes.

Single-pass mode — when a single pass crashes directly on the input (all intermediate passes were removed in step 1):

DETECTION_PASS="<crashing-pass>" $SKILL_DIR/scripts/reproduce_crash.sh input.ssa

Validates: (1) input parses, (2) the pass crashes.

Choosing a detection pass

The detection pass is appended after the buggy passes. noir-ssa transform calls normalize_ids when formatting output after every pass, so any pass works for detecting corruption caught by normalize_ids (e.g., "Unmapped value" panics). Simplifying or Inlining Brillig Calls are lightweight choices.

The script defaults to target/debug/noir-ssa relative to the repo root. Override with NOIR_SSA=/path/to/noir-ssa.

Run reproduce_crash.sh after every change to input.ssa to verify the crash still reproduces.

3. Automated Reduction

Run reducer scripts from the same directory as input.ssa. Both --passes and --error-pattern are required. Pass all passes including the detection pass.

Phase 1: Remove unused instructions

python3 $SKILL_DIR/scripts/reduce_instructions.py --passes "<pass>" "<detection-pass>" --error-pattern "<error text>"

Iterates over instructions, removes those whose results aren't referenced elsewhere, keeps only removals where the crash still reproduces.

Phase 2: Collapse control flow

python3 $SKILL_DIR/scripts/reduce_branches.py --passes "<pass>" "<detection-pass>" --error-pattern "<error text>"

Converts jmpif to unconditional jmp (tries both targets). Re-runs Phase 1 after each successful collapse.

Phase 3: Apply cleanup passes

Apply simplification passes one at a time. After each, verify the same error pattern still triggers:

noir-ssa transform --source-path input.ssa --ssa-pass "Simplifying" -o candidate.ssa
# Then verify:
SSA_PASSES="<pass>" DETECTION_PASS="<detection-pass>" $SKILL_DIR/scripts/reproduce_crash.sh candidate.ssa
# If same error, replace:
cp candidate.ssa input.ssa

Try these passes in order:

1. Simplifying — collapses trivial block chains
2. Mem2Reg — eliminates store/load pairs
3. Dead Instruction Elimination — removes dead instructions

If a cleanup pass triggers a different error: save that SSA separately as a potential second bug, but do not use it as input.ssa.

Phase 4: Repeat

Re-run phases 1–3 until no more reductions are possible.

Phase 5: Manual simplifications

Draw a CFG diagram first. Write an ASCII diagram of the control flow graph to a file (e.g., cfg_diagram.txt). This makes the meaningful structure visible — nested diamonds, loop nesting, jmp chains vs. actual branch points — and guides which simplifications preserve the structure that triggers the bug vs. which just remove padding. Update the diagram after significant reductions.

Try each change one at a time, running reproduce_crash.sh after each:

• Collapse jmp chains: if bA → bB → bC are all unconditional jumps with no instructions/params, redirect bA → bC and remove bB. This is the single most effective manual reduction for CFG-heavy inputs
• Remove nested structure levels: in nested diamonds or loops, try rewiring an outer level to point directly at an inner level's targets, removing the intermediate blocks entirely
• Make jmpif converge: try pointing both branches of a jmpif to the same target (e.g., jmpif v0 then: bX, else: bX). This tests whether the branch matters or just the block count
• Remove unused globals: delete gN definitions not referenced in any function body
• Simplify constants: replace large numeric constants (u128 671967...) with small values (u128 1)
• Remove unused functions: if f0 just calls f1, try return in f0; or inline f1 into f0
• Reduce loop bounds: e.g., lt vN, u32 3 → lt vN, u32 1. Test one change at a time — reductions that work individually may not compose
• Remove function arguments: remove the parameter from the signature, replace uses with a constant, remove the argument from all call sites. Arguments feeding control flow (jmpif conditions, loop bounds) are less likely to be removable
• Remove return values: replace return vN with return, update the function signature and callers
• Simplify function attributes: try removing predicate_pure and other attributes

4. Completion Criteria

Reduction is done when:

• No automated reducer makes further progress
• No cleanup pass shrinks the input
• Manual simplifications have been attempted
• The minimized SSA is small enough to read and understand the bug pattern

5. Common Bug Patterns

After reduction, the minimized SSA reveals the structural trigger:

• Unreachable value references: a pass leaves instructions in unreachable blocks whose values are still referenced in reachable blocks. Detected by normalize_value_ids panicking with "Unmapped value".
• Missing stores: a pass removes a store, leaving a load that reads uninitialized memory. Detected by "loaded before it was first stored".
• Changed semantics: a pass changes program output. Detected by comparing interpreter results before and after.

Reference

• noir-ssa check: parses SSA, normalizes IDs, removes unreachable blocks, prints canonical form to stdout (not -o). Use to clean up after manual edits: noir-ssa check --source-path input.ssa > normalized.ssa.
• --ssa-pass uses substring matching (contains()), always matching the first pass with that name. Passes appearing multiple times may have different implementations at different pipeline positions.
• Serialize to heal state: noir-ssa transform -o file.ssa then re-read — isolates whether corruption is in DFG state or logical SSA structure.