Rp Investigate V2

Deep Investigation Mode

Investigate: $ARGUMENTS

You are now in deep investigation mode for the issue described above. Follow this protocol rigorously.

Investigation Protocol

This workflow leverages five complementary capabilities:

• You (the agent): Orchestrate. Triage what the task needs, dispatch scout/research agents for fact-gathering, run context_builder, dispatch an investigation agent, curate the file selection, and synthesize the final report. Default posture: coordination, not reconnaissance.
• Scout/research agents (spawn_agent with agent_type:"code_mapper" for in-repo archaeology or agent_type:"docs_researcher" for web/external docs): Read-only sub-agents in a fresh context window, for narrow self-contained questions. Used in two places: (1) before context_builder, for facts outside the current selection (git archaeology, web searches, external docs — findings go to ## Background / Prior Research in the report); (2) spawned by the investigation agent for narrow checks.
• Context Builder (context_builder): Populates the file selection with full files or slices relevant to the task. Feed it the report path so prior research informs the selection.
• Chat (oracle_send): Deep analytical reasoning over the current file selection. Good for synthesis across selected files; not a lookup tool.
• Investigation agent (spawn_agent with agent_type:"investigation_lead", reasoning_effort:"high", fork_turns:"none"): Full-capability agent for the main line of inquiry. Reads files, runs git, spawns narrow scout/research agents when needed, and writes findings into ## Investigator Findings in the report.

This workflow is read-only. Output lands in the investigation report; no source code changes.

How File Selection Drives the Workflow

The sub-agents' file reads don't populate your file selection — they run in their own sessions. Selection curation is your job: the chat only sees what's in the selection in your window.

1. context_builder seeds the selection during Phase 2
2. After the investigation agent returns, refresh the selection to match what the investigation surfaced — add files it referenced, add slices of large files where only a region is relevant, remove fully unrelated files
3. Bias toward inclusion — better for the chat to see a related file than miss one. Prune only files/codemaps that are clearly unrelated; when in doubt, keep them
4. Never op:"clear" or op:"set" — they wipe context_builder's curation. Use op:"add" / op:"remove" / slices

Core Principles

1. Don't stop until confident — pursue every lead until evidence is solid
2. Delegate before reading — phases below lay out the default order (scout/research → context_builder → investigation agent → chat). You orchestrate; the investigation agent writes findings directly to the report.
3. Curate the selection between chat calls — the investigation agent's reads aren't visible in your selection; add files it surfaced, bias toward inclusion
4. Direct tool calls are for follow-up — reserve your own read_file / file_search / git for user-supplied leads, verifying agent findings, and grabbing final line-number evidence
5. Don't duplicate in-flight work — while agents are running, don't re-run their investigation or spin up overlapping fleets

Phase 0: Workspace Verification (REQUIRED)

Before any investigation, bind to the target codebase using its working directory:

{"tool":"bind_context","args":{"op":"bind","working_dirs":["/absolute/path/to/project"]}}

This auto-resolves to the window containing your project. No need to list windows first.

If binding succeeds → proceed to Phase 1 If no match → the codebase isn't loaded. Find and open the workspace:

{"tool":"manage_workspaces","args":{"action":"list"}}
{"tool":"manage_workspaces","args":{"action":"switch","workspace":"<workspace_name>","open_in_new_window":true}}

Then retry the working_dirs bind.

Phase 1: Initial Assessment & Triage (Agent — you)

1. Read any provided files/reports (traces, logs, error reports)
2. Summarize symptoms and form initial hypotheses
3. Create the investigation report file — use docs/investigations/<topic>-<YYYY-MM-DD>.md (or match the repo's existing convention; look under docs/investigations/ for examples). Note its absolute path; you'll feed it to context_builder and the investigation agent.
4. Triage external info needs. Does the task require anything context_builder can't see in the workspace?
   • Git history (blame, log archaeology, "when did this regress", PR context)
   • Web searches or external documentation
   • Other facts outside the workspace

If yes, run Phase 1.5 first. Otherwise skip to Phase 2.

Phase 1.5: External Fact-Gathering (conditional)

Dispatch scout/research agents in parallel for external facts. Use code_mapper for git/repo archaeology and docs_researcher for web or external documentation. As each returns, write a concise entry into the report's ## Background / Prior Research section — commits, excerpts, links.

// Research agent for external fact-gathering (use code_mapper for git archaeology)
{"tool":"spawn_agent","args":{
	"task_name":"research_<kind>",
	"agent_type":"docs_researcher",
	"reasoning_effort":"low",
	"fork_turns":"none",
	"message":"<Specific question>. Report relevant commits/file:line refs or links + short summary."
}}

⚠️ Agents may block on permission approvals. Use wait_agent and list_agents periodically so you can approve requests and keep them unblocked.

Phase 2: Broad Context Gathering (via context_builder — REQUIRED)

context_builder discovers workspace files you'd miss manually. Pass detailed instructions + the report path so prior research informs its selection:

mcp__RepoPrompt__context_builder:
  instructions: |
	<task>Describe the specific issue or question to investigate</task>

	<context>
	See investigation report at `<absolute/path/to/investigation-report.md>` for symptoms, hypotheses, and any prior research (git history, external docs) gathered in Phase 1.5.

	Symptoms:
	- <symptom 1>
	- <symptom 2>

	Hypotheses to test:
	- <theory 1>
	- <theory 2>

	Areas likely involved:
	- <files, patterns, or subsystems>
	</context>

	response_type: question

Use response_type: question so the chat returns its initial assessment immediately. If context_builder produces a thin selection (few files, or misses obvious areas), re-run it with refined instructions rather than doing the broad search yourself.

Phase 3: Investigation Agent (Main Line of Inquiry)

Dispatch an investigation_lead agent for the main investigation. It handles multi-step reasoning and spawns narrow scout/research agents for focused reconnaissance when useful.

Skip the investigation agent only when the chat's hypotheses point to a single spot one read_file would resolve, or when Phase 1.5's external research already answers the task.

Default: one investigation_lead writing to ## Investigator Findings. Escalate to 2-3 parallel investigation agents only when the chat's response surfaces genuinely disjoint hypothesis paths (distinct root-cause theories in different subsystems — e.g., "caching vs. threading vs. encoding"). Each gets a disjoint scope and its own ## Investigator Findings: <path> sub-section; cap at 3.

Its brief should include:

• Hypothesis and what you want proved or disproved
• Relevant chat analysis points
• Absolute path to the report file, with instruction to append findings under ## Investigator Findings (file:line refs, evidence, conclusions)
• Encouragement to fan out code_mapper or docs_researcher agents for parallel reconnaissance — seed 2–3 concrete candidate checks to kickstart delegation

{"tool":"spawn_agent","args":{
	"task_name":"investigate_<hypothesis>",
	"agent_type":"investigation_lead",
	"reasoning_effort":"high",
	"fork_turns":"none",
	"message":"Investigate <hypothesis>. See `<report-path>` for context. Trace <flow>, verify <behavior>. Fan out code_mapper/docs_researcher agents only for narrow checks; candidate checks: <check 1>, <check 2>, <check 3>. Append findings to `## Investigator Findings` in the report with file:line refs and evidence."
}}

While the investigation agent runs, don't re-run its investigation. Monitor the session for permission approvals, handle user-supplied specifics (files the user pointed you at), run git on already-pinpointed code, and plan the next chat questions. Don't spin up parallel scout agents at your level — the investigation agent owns that work.

When the investigation agent returns:

{"tool":"wait_agent","args":{"timeout_ms":60000}}
{"tool":"list_agents","args":{}}

Read the ## Investigator Findings — primary evidence. Spot-check specific claims with read_file / file_search / git before folding into the root cause.

Housekeeping

Agents persist after they finish — useful when you might revisit output, but they pile up over a multi-agent workflow. Once you've recorded what an agent produced, close it:

{"tool":"close_agent","args":{"target":"<task_name>"}}

Scout/research agents are good to close right away — narrow reconnaissance, no follow-up value. Keep heavier agents if you might revisit them.

Phase 4: Refocus Selection + Chat Deep Dives (iterate)

Before each chat call, curate the selection. The investigation agent's file reads ran in another session — they aren't in your selection. Update it to match what the investigation surfaced:

• Add files the investigation agent referenced in ## Investigator Findings
• Add slices of large files where only a region is relevant
• Remove files that turned out to be fully unrelated — bias toward keeping; when in doubt, leave it
• Never op:"clear" or op:"set" — they wipe context_builder's curation. Use op:"add" / op:"remove" / slices

Then ask a question that requires synthesis, not lookup:

// Add files the investigation agent surfaced
mcp__RepoPrompt__manage_selection:
	op: add
	paths: [<files surfaced by the investigation agent>]

// Or add a slice of a large file
mcp__RepoPrompt__manage_selection:
	op: add
	slices:
	- path: "Root/large/file.swift"
		ranges: [{start_line: 100, end_line: 250}]

// Ask a focused question — the chat sees the updated selection
mcp__RepoPrompt__`oracle_send`:
  chat_id: <from context_builder>
	message: |
	Here's what the investigation agent found:
	- <evidence 1 with file:line>
	- <evidence 2 with file:line>

	<specific analytical question>
	mode: chat

Repeat Phases 3–4 as needed. For new evidence between chat calls, steer the existing investigation agent with followup_task or dispatch a fresh code_mapper / docs_researcher for narrow external lookups. Don't burn a chat call on a question read_file / file_search / git could answer.

Stop when: root cause is identified with concrete file:line evidence, alternate hypotheses are ruled out with specific counter-evidence, and recommended fixes point at exact locations.

Phase 5: Conclusions & Report (Agent — you)

## Investigator Findings and ## Background / Prior Research are your factual baseline. Verify line references as you fold them into:

• Root cause — exact file paths, line numbers, code snippets
• Eliminated hypotheses — and the evidence that ruled them out
• Recommended fixes — specific, actionable, with file locations
• Preventive measures — how to avoid this recurring

Role Summary

Report Template

Create a findings report as you investigate:

# Investigation: [Title]

## Summary
[1-2 sentence summary of findings]

## Symptoms
- [Observed symptom 1]
- [Observed symptom 2]

## Background / Prior Research
<!-- Findings from Phase 1.5 scout/research agents: git archaeology, external docs, web searches.
     The agent populates this section before running the context builder. Omit if nothing outside the workspace was needed. -->

## Investigator Findings
<!-- The investigation agent appends its structured analysis here (file:line refs, evidence, conclusions).
     The agent leaves this section for the investigator to populate and folds it into the root cause below.

     If running 2–3 parallel investigation agents on disjoint hypothesis paths, replace this single section
     with one sub-section per path, e.g.:
         ## Investigator Findings: <hypothesis path A>
         ## Investigator Findings: <hypothesis path B>
     Each investigator writes only to its own sub-section to avoid write contention. -->

## Investigation Log

### [Phase] - [Area Investigated]
**Hypothesis:** [What you were testing]
**Findings:** [What you found]
**Evidence:** [Exact file paths, line numbers, code snippets, git commits]
**Conclusion:** [Confirmed/Eliminated/Needs more investigation]

## Root Cause
[Detailed explanation with precise evidence]

## Recommendations
1. [Fix 1 — specific file and location]
2. [Fix 2 — specific file and location]

## Preventive Measures
- [How to prevent this in future]

Anti-patterns to Avoid

• 🚫 Running context_builder with incomplete inputs — before Phase 1.5 external research, or without the report path
• 🚫 Skipping Phase 0 — confirm the target codebase is loaded first
• 🚫 Skipping context_builder or doing broad manual reads — you'll miss context
• 🚫 Duplicating in-flight work — broad reads/searches or parallel scout agents at your level while the investigation agent is investigating. Dispatch, then orchestrate.
• 🚫 Stale file selection before chat calls — the investigation agent's reads aren't in your selection; add files it surfaced, bias toward inclusion, never op:"clear"/op:"set" (wipes context_builder's curation)
• 🚫 Asking the chat for exact line numbers or using it for lookups — it can't produce reliable line numbers and it's not a lookup tool; verify yourself or delegate to a tool call
• 🚫 Calling the chat without new evidence between turns
• 🚫 Parallel investigation agents on overlapping hypotheses — only parallelize for genuinely disjoint paths; each investigator gets its own ## Investigator Findings: <path> sub-section
• 🚫 Dispatching the investigation agent without the report path — it should append findings directly
• 🚫 Wrong tool for the job — scout/research agents for complex multi-step in-workspace investigation (use investigation_lead), or broad prompts like "investigate the auth system" to scouts (one specific check each)
• 🚫 Forgetting to check dispatched agents — they may block on permission approvals

Now begin. Follow the phases above: assess → (if needed) gather external facts → context_builder → investigation agent → refresh selection → chat synthesis → report. You orchestrate, they investigate.