Configuring Radar Sensors

Configuring Radar Sensors

When to Use

Use this skill when the user asks to create a radar scene, configure an OmniRadar prim, choose radar output frame/coordinate behavior, configure radar scan outputs, or request radar PointCloud channels.

Inputs

Resolve inputs in this order: existing repository files and referenced snippets, explicit user request, then broader agent context.

• Target API surface: Python, C/C++, USD, or a combination.
• Radar sensor prim path, pose, frame rate, scan configuration, and output format attributes.
• RenderProduct path, PointCloud RenderVar path, requested output channels, coordinate representation, and output frame.
• Whether the user needs USD authoring only or an end-to-end example that steps and reads the configured output.
• Repository source snippets referenced below. Treat these snippets as the API source of truth.

Prerequisites

• Use an ovrtx checkout that contains the referenced examples and docs tests.
• Read the relevant > **Source:** snippet before writing or explaining API usage.
• Use reading-sensor-pointclouds for map/read code after the configured scene renders.
• Use interpreting-radar-pointclouds for channel units, signed radial velocity, validity, and visualization semantics.

Instructions

1. Identify the radar prim, RenderProduct, PointCloud RenderVar, requested channels, scan behavior, coordinate behavior, and output frame.
2. Read the matching USD, Python, or C/C++ source snippet before writing API usage.
3. Author the OmniRadar prim and PointCloud RenderVar channel set explicitly; do not imply channels are available unless requested or auto-enabled.
4. Combine configuration, reading, and interpretation skills only when the user asks for an end-to-end radar workflow.
5. When changing code, run the narrow docs test or example that owns the snippet whenever practical.

Output Format

• For explanations, cite the relevant API names, source snippets, and caveats.
• For code changes, summarize the files changed, snippets affected, and validation run.

Scripts

This skill has no scripts.

Limitations

• The referenced snippets remain the source of truth; update or add tested snippets before documenting new API usage.

Overview

An ovrtx radar setup has two parts:

• An OmniRadar prim with OmniSensorGenericRadarWpmDmatAPI that defines the sensor model, pose, frame rate, and output format.
• A RenderProduct pointing at that radar plus a PointCloud RenderVar that selects the radar output channels to expose.

The same USDA scene pattern is used from Python and C; the language-specific code only loads the scene, steps the render product, and maps the output.

Minimal Radar Prim

Python example scene

Source: examples/python/radar/radar_example.usda snippet configure-radar-sensor

C example scene

Source: examples/c/radar/radar_example.usda snippet configure-radar-sensor

Use OmniSensorGenericRadarWpmDmatAPI for the generic WPM DMAT radar model. The schema automatically includes scan configuration s001; apply OmniSensorGenericRadarWpmDmatScanCfgAPI:s002, s003, and so on only when authoring additional scan patterns.

In Z-up scenes, keep the physical scene Z-up and rotate the radar prim so sensor +X points along the intended forward direction. Prefer authoring that transform in USD instead of relying on renderer settings that change the coordinate frame globally.

Output Attributes

These output-defining attributes, among others, live on the radar prim with the omni:sensor:WpmDmat: prefix.

OmniRadar prims expose many additional WPM DMAT sensor and scan attributes for wavelength, ray depth, CFAR behavior, range/velocity/angular bins, noise, RCS tuning, and antenna/aperture configuration. Preserve existing attributes when editing a tuned sensor, and author model-specific values from the schema.

For the full schema-derived attribute list, read schemas/omni_sensors/schema.usda.

Scan Configuration

The default scan is s001, and scan attributes use the omni:sensor:WpmDmat:scan:<scanName>: prefix. Use scan attributes such as max range, angular limits, resolution, bin counts, CFAR settings, noise settings, and RCS tuning to match the target radar model.

For concise examples, keep one scan unless the behavior being demonstrated requires near/far or otherwise distinct scan patterns.

PointCloud Render Output

Python example scene

Source: examples/python/radar/radar_example.usda snippet configure-radar-pointcloud-output

C example scene

Source: examples/c/radar/radar_example.usda snippet configure-radar-pointcloud-output

sourceName = "PointCloud" is the radar sensor render output. Request only the channels needed by the consumer to keep memory use down.

Common radar channels:

Troubleshooting

• Output-defining attributes are not intended for runtime mutation; author them in USD before loading the scene.
• Counts defines the delivered range in per-detection tensors. Do not iterate over the full tensor allocation; use Flags for per-detection validity.
• PointCloud only needs requested payload channels; the model auto-enables Counts and Flags and delivers them like ordinary channel tensors.
• Radar output frame and visualizer frame are separate concerns. If output is in SENSOR frame, configure the visualizer to interpret that frame instead of changing the sensor to WORLD unless world-frame output is actually desired.

Related Skills

• reading-render-output for mapping render variables and composite tensors.
• reading-sensor-pointclouds for point-cloud tensor access patterns.
• interpreting-radar-pointclouds for radar channel units and visualization.

References

• Use the > **Source:** directives in this skill to locate tested snippets before reusing API patterns.
• Keep related skills, docs, and snippets synchronized when changing the workflow.