Compose State Deferred Reads

Compose state deferred reads

Core principle

State reads invalidate the phase that reads them. If a State<T> is read in a composable body, changes invalidate composition. If it is read in layout or draw, changes can invalidate only layout or draw. Frame-rate state such as scroll offsets, animations, and drag positions usually belongs in layout/draw, not composition.

Back-writing is the symmetric failure mode: writing observable state from a phase that triggers invalidation of an earlier phase. Compose phases run composition → layout → draw. Writing snapshot-backed state from layout or draw to state read in composition invalidates composition; writing during composition to state read earlier in the same composition does the same. Both schedule extra work — often cascading into sibling lazy items.

The fix is structural: keep the State<T> or a provider lambda and read the value inside a layout/draw callback; capture measurements in callbacks and apply them in the measure phase, not by reading measurement state in sibling composable bodies.

When to use this skill

• val x by animate*AsState(...) is passed to Modifier.offset(x = ...), Modifier.size(...), Modifier.graphicsLayer(...), or another value-form modifier.
• LazyListState.firstVisibleItemScrollOffset, ScrollState.value, Animatable.value, or gesture state is read in a composable body.
• A composable takes scrollOffset: Int, progress: Float, dragOffset: Offset, or similar frame-rate values.
• Recomposition counters climb during scroll, animation, or gestures even when data is stable.
• A composable body calls stateMap[key] = …, list.addAll(…), or similar on every recomposition (back-writing composition → composition).
• One lazy item captures size with onSizeChanged / onGloballyPositioned and a sibling reads that height in composition (Modifier.height(state.dp)) — back-writing layout → composition.

0. Back-writing

Back-writing = writing observable state in one phase that triggers invalidation of an earlier (or the current) phase. Compose runs composition → layout → draw, so:

• Writing snapshot state during composition that's read in the same composition.
• Writing snapshot state during layout (e.g. from Modifier.layout, onSizeChanged, onGloballyPositioned) that's read during composition.
• Writing snapshot state during draw that's read during composition or layout.

In all cases the writer schedules extra invalidation passes — often cascading into sibling lazy items.

Do not write to mutableStateOf, mutableStateListOf, mutableStateMapOf, or other snapshot-backed state from the composable body on every pass:

// ❌ BAD — mutates observable map during composition; siblings recompose repeatedly
@Composable
fun MergeOverlay(parent: Map<Key, ViewState>, overlay: Map<Key, ViewState>): Map<Key, ViewState> {
    val merged = remember { mutableStateMapOf<Key, ViewState>() }
    merged.clear()
    merged.putAll(parent)
    merged.putAll(overlay)   // back-writing composition → composition
    return merged
}

// ✅ GOOD — read-only merge; no composition-time writes
@Composable
fun MergeOverlay(parent: Map<Key, ViewState>, overlay: Map<Key, ViewState>): Map<Key, ViewState> =
    remember(parent, overlay) {
        if (overlay.isEmpty()) parent else parent + overlay
    }

Prefer remember(keys) { … } for derived read-only snapshots. Reserve mutableState* writes for event callbacks (onClick) or effects — not for rebuilding derived data on every composition.

Callbacks like onSizeChanged write during layout. That is only safe if no earlier phase reads the resulting state — see cross-row measurement below.

Cross-row measurement (layout → composition back-write)

When row A measures and row B must match A's height, do not read A's captured size in B's composable body. onSizeChanged writes during layout; if B reads it in composition, layout has just back-written into composition:

var anchorHeightPx by remember { mutableIntStateOf(0) }

// ❌ BAD — B reads measurement state in composition; insertion/focus can double-recompose B
RowA(Modifier.onSizeChanged { anchorHeightPx = it.height })
RowB(Modifier.height(with(LocalDensity.current) { anchorHeightPx.toDp() }))  // composition read

// ✅ GOOD — capture on A; apply on B in measure phase only
RowA(Modifier.onSizeChanged { if (it.height != anchorHeightPx) anchorHeightPx = it.height })
RowB(
    Modifier.decorateMeasureConstraints { incoming ->
        if (anchorHeightPx > 0) incoming.copy(minHeight = anchorHeightPx, maxHeight = anchorHeightPx)
        else incoming
    },
)

decorateMeasureConstraints is a small layout helper (see compose-modifier-and-layout-style). While height is unknown, siblings use a fixed fallback in composition; once known, only layout invalidates — not an extra composition cascade.

1. Prefer block-form modifiers

Several modifiers have value forms and block forms. The value form receives values already read in composition; the block form can read during layout or draw.

// Before: animated value read in composition by the `by` delegate
@Composable
fun SelectionPill(selectedIndex: Int) {
    val offsetX by animateDpAsState(120.dp * selectedIndex)
    Box(Modifier.offset(x = offsetX))
}

// After: State is kept, value is read in the layout-phase offset block
@Composable
fun SelectionPill(selectedIndex: Int) {
    val offsetX = animateDpAsState(120.dp * selectedIndex)
    Box(
        Modifier.offset {
            IntOffset(offsetX.value.roundToPx(), 0)
        },
    )
}

Common replacements:

The drawBehind block is already draw-phase; the important part is that the State.value read also happens inside that block.

2. Pass providers across composable boundaries

If the fast-changing value would cross a composable boundary, pass a provider lambda instead of a snapshot value:

// Before: HomeScreen reads scroll offset in composition and passes the value down
@Composable
fun HomeScreen() {
    val listState = rememberLazyListState()
    LazyColumn(state = listState) {
        item { HeroImage(scrollOffset = listState.firstVisibleItemScrollOffset) }
    }
}

@Composable
fun HeroImage(scrollOffset: Int, modifier: Modifier = Modifier) {
    AsyncImage(
        model = "...",
        modifier = modifier.graphicsLayer(translationY = -scrollOffset / 2f),
    )
}

// After: the only read happens inside graphicsLayer
@Composable
fun HomeScreen() {
    val listState = rememberLazyListState()
    LazyColumn(state = listState) {
        item {
            HeroImage(
                scrollOffsetProvider = {
                    if (listState.firstVisibleItemIndex == 0) {
                        listState.firstVisibleItemScrollOffset
                    } else {
                        0
                    }
                },
            )
        }
    }
}

@Composable
fun HeroImage(scrollOffsetProvider: () -> Int, modifier: Modifier = Modifier) {
    AsyncImage(
        model = "...",
        modifier = modifier.graphicsLayer {
            translationY = -scrollOffsetProvider() / 2f
        },
    )
}

Suffix provider parameters with Provider when that clarifies the deferred-read contract.

3. Other layout/draw read sites

State reads can also be deferred inside:

• Modifier.layout { measurable, constraints -> ... }
• Custom Alignment.align(...)
• drawWithContent, drawBehind, and other draw modifiers
• Block-form layer/layout modifiers such as graphicsLayer { ... } and offset { ... }

Use these when the state changes where something is placed or painted. If the state decides which composables exist, it belongs in composition.

Quick reference

When NOT to apply

• The state controls which composables are emitted.
• The animation is one-shot, cheap, and clarity wins.
• You are writing tests where direct value assertions are simpler.
• Runtime evidence shows recomposition is not the bottleneck.

Related

• compose-state-authoring — when mutableState* belongs in composition vs callbacks.
• compose-state-holder-ui-split — where state-holder vs plain UI split applies when passing providers/lambdas across boundaries.
• compose-stability-diagnostics — parameter stability and compiler reports.
• compose-modifier-and-layout-style — measure-phase constraint decoration helper.