Payload Analysis

Payload Analysis

This skill analyzes a payload using a local snapshot (produced by payload-snapshot) to identify root causes of blocking job failures and produce a comprehensive HTML report. The snapshot pre-gathers all release controller, GitHub, and CI data so this skill can focus purely on analysis — no live API orchestration required.

It supports Rejected payloads (full analysis of all failed blocking jobs), Ready payloads (early analysis of blocking jobs that have already failed), and Accepted payloads (which may have been force-accepted despite blocking failures).

When to Use This Skill

Use this skill when you need to:

• Understand why a payload was rejected
• Investigate failures in a force-accepted payload
• Assess whether an in-progress ("Ready") payload is likely to be rejected
• Determine whether failures are new or persistent
• Identify which PRs likely caused new failures
• Get a comprehensive overview of payload health with actionable root cause analysis
• Re-analyze a historical payload against its original snapshot data

Examples

1. Analyze an amd64 nightly payload (auto-creates snapshot if needed):

   /ci:payload-analysis 4.22.0-0.nightly-2026-02-25-152806
   

2. Analyze using an existing snapshot directory:

   /ci:payload-analysis 4.22.0-0.nightly-2026-02-25-152806 --snapshot-dir payload/4.22/nightly
   

3. Analyze an arm64 payload (architecture inferred from tag):

   /ci:payload-analysis 4.22.0-0.nightly-arm64-2026-02-25-152806
   

Prerequisites

1. Python 3 (3.10 or later) — for running the snapshot script if needed
2. gcloud CLI — for subagent artifact download (must-gather, pod logs)
3. GitHub CLI (gh) — for step-registry change detection (Step 3.6) and checking existing revert PRs (Step 6.3)

Bundled Resources

Load these only at the step that needs them — not up front:

• references/investigation-subagent.md — the verbatim per-job subagent prompt and ANALYSIS_RESULT format (Step 4)
• references/report-guide.md — per-section content rules for the HTML report (Step 7)
• references/completeness-review.md — the completeness-reviewer prompt and response handling (Step 9)
• assets/report-template.html — the fill-in-the-blanks HTML report template (Step 7)
• references/ship-status-component-map.md — SHIP Status slug mapping (Step 6.5)

The payload-results-yaml and payload-autodl-json skills define the structured output schemas; load each via the Skill tool at its point of use (Steps 6.7 and 8).

Implementation Steps

Step 1: Parse Arguments

Anchor the output directory before anything else. Capture the current working directory up front so all output files land in one stable, predictable location even if a later step changes directories:

OUTPUT_DIR="$(pwd)"

All three output files — the payload results YAML (Step 6.7), the HTML report (Step 7), and the autodl JSON (Step 8) — MUST be written under $OUTPUT_DIR, never into a snapshot subdirectory or a path a later cd may have changed. The Step 10 self-check verifies them at $OUTPUT_DIR.

The first argument is a full payload tag (e.g., 4.22.0-0.nightly-2026-02-25-152806). Parse from it:

• tag: The specific payload tag to analyze
• version: Extract from the tag (e.g., 4.22 from 4.22.0-0.nightly-...)
• stream: Extract from the tag (e.g., nightly from 4.22.0-0.nightly-...)
• architecture: Inferred from the tag. The tag format is <version>-0.<stream>[-<arch>]-<timestamp>. If no architecture is present between the stream and timestamp, it is amd64. Otherwise, the architecture is the segment between the stream and timestamp. Examples:
  • 4.22.0-0.nightly-2026-02-25-152806 → amd64
  • 4.22.0-0.nightly-arm64-2026-02-25-152806 → arm64
  • 4.22.0-0.nightly-ppc64le-2026-02-25-152806 → ppc64le

Optional flags:

• --snapshot-dir DIR: Use an existing snapshot directory (Step 2).
• --as-of TIMESTAMP: An RFC 3339 UTC cutoff (e.g. 2026-07-23T07:44:48Z). When present, this is a point-in-time analysis: reason only from evidence that existed at or before this instant, as if you were analyzing the payload the moment it completed.

Point-in-time boundary. When --as-of is set, treat it as a hard cutoff for every piece of evidence, direct or delegated:

• Do not use later reverts, follow-up comments, subsequent payload outcomes, or the present-day absence of a revert as causal evidence. A PR that was later reverted, or never reverted, tells you nothing about causality as of the cutoff.
• Timestamp-bound every external lookup. When checking GitHub PRs, step-registry history (Step 3.6), or existing revert PRs (Step 6.3), ignore any commit, PR, comment, or review created after the cutoff.
• Pass the cutoff to every subagent you dispatch and instruct it to discard post-cutoff artifacts and discussion.
• If a lookup returns only post-cutoff results, treat that evidence as unavailable rather than as a finding.

When --as-of is omitted, analyze against present-day evidence as usual.

Step 2: Locate or Create Snapshot

The analysis requires a local snapshot produced by the payload-snapshot skill. Search for an existing snapshot in this order:

1. Explicit --snapshot-dir DIR: If provided, look for DIR/summary.json. If not found, exit with an error.
2. Current directory: Check if ./summary.json exists and its payload_tag field matches the requested tag.
3. Standard relative path: Check if payload/<version>/<stream>/summary.json exists and matches the tag.

If no matching snapshot is found, create one:

SNAPSHOT_SCRIPT="${CLAUDE_PLUGIN_ROOT}/skills/payload-snapshot/scripts/payload_snapshot.py"
if [ ! -f "$SNAPSHOT_SCRIPT" ]; then
  SNAPSHOT_SCRIPT=$(find ~/.claude/plugins -type f -path "*/ci/skills/payload-snapshot/scripts/payload_snapshot.py" 2>/dev/null | sort | head -1)
fi
if [ -z "$SNAPSHOT_SCRIPT" ] || [ ! -f "$SNAPSHOT_SCRIPT" ]; then echo "ERROR: payload_snapshot.py not found" >&2; exit 2; fi
python3 "$SNAPSHOT_SCRIPT" <payload_tag>

After locating summary.json, set SNAPSHOT_DIR to the directory containing it. All relative paths in summary.json (e.g., job_json, junit_results, build_log, PR paths) resolve from this directory.

The snapshot script automatically prefers release-controller data and falls back to Sippy for payloads that have been garbage collected. Do not truncate the analysis chain merely because an originating tag is absent from the live release controller; use the Sippy-backed payloads[] entry and its PR data. Check each entry's source and changelog_source fields when provenance or field completeness matters.

Step 3: Extract Failure Data from Snapshot

Read summary.json to extract all data needed for analysis. The snapshot has already done the work of fetching payloads, building the chain, tracking streaks, and collecting PR data.

3.1: Payload Metadata

From summary.json top-level fields:

• payload_tag, phase, release_url, source, architecture, stream, version
• chain_length, baseline_tag, hours_since_baseline

Record phase verbatim from the summary.json metadata (Accepted, Rejected, or Ready). Never infer the phase from the job results or from whether failures exist — a payload can be Accepted with blocking failures (force-accepted) or Ready while jobs are still running. The stored phase drives the force-accept decision (Step 6.4) and the executive summary (Step 7.1), so an inferred phase silently corrupts both.

3.1b: If the Snapshot Is Incomplete, Collect the Data Yourself

Check summary.json → data_complete. An absent test_failure_count means unknown, not zero — never conclude a job had no test failures, and therefore failed for some other reason, from missing data.

When data is missing, collect it yourself from the job's gcs_url artifacts rather than analyzing around the gap. Do the same for any payload in the chain whose per-test data is missing. Report a gap as a limitation only when the artifacts themselves are unreachable.

An aggregated job with no per-test results at all is unclassified, not part of a regression streak — aggregation also fails when too few child runs completed or infrastructure killed them. Check the child runs: one that died before the test phase cannot have failed a test.

3.2: Failed Blocking Jobs

From summary.json → blocking_jobs.failed_jobs[], each entry contains:

• name, state, prow_url, gcs_url, is_aggregated, retries
• rhcos_version: the RHCOS variant for this job (rhcos9, rhcos10, rhcos9_10, rhcos9-default, or rhcos10-default)
• streak: streak_length, originating_payload, is_new_failure, failure_pattern
• build_log_errors, test_failure_count
• Paths: job_json, junit_results, build_log

For each failed job, read its job.json (at SNAPSHOT_DIR/<job_json> path) to get previousAttemptURLs.

3.3: Candidate PRs

For each failed job's streak.originating_payload, find the matching entry in summary.json → payloads[]. Its prs[] array contains the PRs introduced in that payload:

• url, component, number, description
• Paths to local artifacts: diff, comments, jobs

Treat this as a preliminary list only. The job-level streak merges unrelated failure modes, so its originating payload is frequently earlier than the regression being investigated — and candidates gathered from it can omit the causal PR entirely. Before scoring, re-derive the originating payload per failure mode from test_failures.blocking[].first_failed_in (Step 5) and collect the candidates from that payload.

For a Sippy-backed originating payload, the PR list remains usable for candidate scoring and the normal GitHub diff/comment/job artifacts are still collected. Sippy does not provide release-controller-only nodeImageStreams, async jobs, or previousAttemptURLs; treat those fields as unavailable rather than empty evidence.

3.4: Test Failure Details

Only test_failures.blocking[] contains failures that can reject the payload. test_failures.informing[] and test_failures.flakes[] cannot fail a job or reject a payload — never score them as candidate causes, never use them to derive a failure mode's originating payload, and never propose a revert for them.

"Informing job" ≠ "informing test." These are two completely different concepts that share a name:

• Informing job (informing_jobs.failed_jobs[]): a CI job that runs for visibility but does not gate the payload. Its pass/fail status is job-level. An informing job can still contain blocking tests.
• Informing test (test_failures.informing[]): an individual test case with lifecycle="informing". It can appear inside any job — blocking or informing. Its results never count toward test_failure_count.

Never combine informing-job counts with informing-test lists. When reporting informing/flake tests, list individual test names from test_failures.informing[] / test_failures.flakes[] — do NOT report informing job failure counts in the same section.

Report informing and flake tests in their own section of the report (the template's informing-tests block carries the standard caveat). Keep them visible: informing tests are new tests being stabilized, and a badly-behaved test can occasionally damage the cluster it runs on. Investigate one only when there is evidence of that, and say plainly that it is not a rejection cause.

From summary.json → test_failures.blocking[]:

• test_name, jobs, first_failed_in, payloads_failing
• failure_message, failure_text (full, not truncated)

3.5: Build Log Errors

For deeper context, read build_log.json (at the build_log path) for any failed job. It contains error_warning_lines[] with line_number and text, plus tail_lines[] (last 20% of the log).

3.6: Check for CI Infrastructure Changes

For each failed job, check whether changes to the CI step-registry in the openshift/release repo correlate with the failure. These changes (modified step scripts, updated URLs, changed environment variables) will never appear in the snapshot's component PR list because they are not payload component changes — but they can break jobs just as effectively.

Extract the date from the originating_payload tag (format: <version>-0.<stream>-YYYY-MM-DD-HHMMSS or <version>-0.<stream>-<arch>-YYYY-MM-DD-HHMMSS for non-amd64). The date is always the last YYYY-MM-DD segment before the HHMMSS suffix (e.g., 2026-06-16 from 5.0.0-0.nightly-2026-06-16-185706 or 5.0.0-0.nightly-arm64-2026-06-16-185706). Compute a time window: since = originating date minus 1 day at T00:00:00Z; until_timestamp = originating date plus 1 day at T23:59:59Z. Under --as-of (Step 1), set until_timestamp to the earlier of that value and the cutoff so the query never returns commits newer than the payload completion. until_timestamp is always a complete RFC 3339 value passed to the query as-is — never append a time suffix to it.

First, get all step-registry commits in the time window:

gh api "repos/openshift/release/commits?path=ci-operator/step-registry&since=<since_date>T00:00:00Z&until=<until_timestamp>&per_page=100" \
    --jq '.[] | {sha: .sha[0:11], date: .commit.committer.date, message: (.commit.message | split("\n")[0])}'

If exactly 100 results are returned, fetch subsequent pages by appending &page=2, &page=3, etc. until a page returns fewer than 100 results.

Triage the results using failure context from Steps 3.4 and 3.5. Extract the key signals from the failure: error messages, failing URLs/domains, exit codes, failing script names, and affected subsystems. Use commit messages as an initial filter, but prioritize inspection of diffs when filenames or modified directories appear relevant even if the commit message is generic — many openshift/release commits have uninformative messages like "Fix typo" or "Update image" while the actual diff contains the interesting change. Relevant commits typically touch the same subsystem, tool, or infrastructure that appears in the error (e.g., a commit modifying mirror URLs when the failure shows curl errors to a new domain; a commit changing proxy configuration when the failure is a connection refused through a proxy). Ignore commits that clearly target unrelated teams or subsystems (hypervisor updates, unrelated repo onboarding, OWNERS file changes).

For each commit that looks potentially related, retrieve the changed files:

gh api "repos/openshift/release/commits/<sha>" --jq '.files[] | {filename, patch}'

First check the filenames — if none correspond to the failing step or any of its dependencies, eliminate that commit immediately without reading the patches. For commits that do touch relevant files, inspect the patches for URL changes, configuration modifications, or script logic changes that could cause the observed failure.

If the commit message includes a PR reference (typically (#NNNNN)), retrieve the PR details:

gh pr view <pr_number> --repo openshift/release --json number,title,url,mergedAt,body

After Step 4 subagent results are available, do a targeted search using the specific step that failed. From the subagent's build log analysis, identify the step-registry path of the step that actually errored (e.g., gather/must-gather, baremetalds/devscripts/proxy, ipi/install/install). Search for recent changes to that exact step and to related steps in the same workflow chain:

gh api "repos/openshift/release/commits?path=ci-operator/step-registry/<step_subpath>&since=<since_date>T00:00:00Z&until=<until_timestamp>&per_page=10" \
    --jq '.[] | {sha: .sha[0:11], date: .commit.committer.date, message: (.commit.message | split("\n")[0])}'

If this finds nothing, also check steps that run earlier in the workflow and set up infrastructure the failing step depends on (e.g., if openshift-e2e-test fails due to connectivity, check baremetalds/devscripts/proxy or ipi/conf steps that configure networking).

Scoring CI infrastructure candidates. If a commit/PR modified a step that the failing job executes (or a shared dependency of that step), flag it as a CI infrastructure candidate — include it in Step 6.1 scoring alongside component PR candidates. When the failure's error messages reference URLs, domains, binaries, or configurations that were changed by the PR, the error message match signal (+40) should fire strongly. The key test: does the PR's diff introduce, modify, or remove something that appears in the error output?

A causal CI-infrastructure change MUST appear as a scored entry in the candidates[] output, exactly like a component PR — even when the overall failure_type is infra. Classifying a failure as infrastructure does not exempt its cause from structured output. Unlike a self-resolving lease/quota blip, a CI-config change is a persistent issue (Step 6.4) that needs a human fix or a revert, so it must be visible to the downstream revert/experiment commands, not buried in prose.

This step catches failures caused by CI tooling changes (mirror URL migrations, proxy configuration updates, script refactors) that are invisible to the snapshot's PR tracking.

3.7: RHCOS RPM Changes

For each failed job's streak.originating_payload, find the matching entry in summary.json → payloads[] and check for rhcos_changes[]. This array (when present) contains per-RHCOS-variant RPM diffs showing which packages changed in the underlying RHCOS image for that payload. As with candidate PRs (3.3), treat this as a preliminary lookup only — re-derive the originating payload per failure mode from test_failures.blocking[].first_failed_in (Step 5) before scoring, since the job-level streak can predate the actual regression:

• name: Human-readable version (e.g., "Red Hat Enterprise Linux CoreOS 10.2")
• tag: Image stream tag — maps to job RHCOS variants:
  • rhel-coreos → applies to jobs with rhcos_version of rhcos9 or rhcos9-default
  • rhel-coreos-10 → applies to jobs with rhcos_version of rhcos10 or rhcos10-default
  • Both apply to rhcos9_10 (heterogeneous) jobs
• changed: {package_name: {"old": old_version, "new": new_version}}
• added: newly added packages (when present)
• removed: removed packages (when present)

For each failed job, identify the matching RHCOS variant's RPM changes (if any), from the failure mode's first_failed_in payload, based on the job's rhcos_version field and the RHCOS tag mapping above. These changes are used as additional context in Step 4 and as scored candidates in Step 6.

3.7b: RHCOS RPM Changelogs

rhcos_changes[] names the packages that changed and their version bumps, but not what changed inside those packages. The snapshot's RPM changelog diffs fill that gap — they contain the actual changelog entries each version bump added, and serve as the RHCOS equivalent of PR diffs: just as you read a PR's code.diff to understand what a component change did, you read an RPM's changelog to understand what a package bump introduced. In Step 6.1, RHCOS RPM changes with changelogs are scored as candidates alongside PRs.

The data is available in two forms:

1. Inline in summary.json — rpm_changelogs[] at the top level. The baseline entry (the one with is_baseline: true) carries its content inline under diff: diff.changed[] with package, old, new, and changelog (the entries the new version added); diff.added[] / diff.removed[] with package and version. This covers the full target-vs-baseline diff without a file read.

2. Per-hop report files — rpm_changelogs[] entries also have a changelogs path pointing at <target-tag>/rpm-changelogs/<variant>/<older-tag>.md. Read these to find which intermediate payload introduced a specific package bump (useful when the originating payload for a failure is not the baseline). payloads[] entries for the target payload and for payloads whose RPMDBs could not be extracted have no rpm_changelogs[] at all — the field is absent, not empty. An intermediate hop where the RHCOS image did not change shows changed: 0, added: 0, removed: 0; use this to pinpoint which hop introduced a given RHCOS bump.

Subpackage deduplication. Multiple binary RPMs are often built from the same source RPM (SRPM) and share identical changelogs. When diff.changed[] contains several packages with the same version bump and the same changelog text, they come from one SRPM — read the changelog once and treat them as a single logical change, not separate candidates.

Variant-specific changelogs differ. The RHCOS 9 and RHCOS 10 variants carry different packages with different changelogs, even in the same payload chain. When a failure is variant-isolated, compare the changelog entries between the two variants: a change that appears in only one variant's packages is a stronger signal for explaining a variant-isolated failure.

Step 4: Investigate Each Failed Job in Parallel

For each failed blocking job in the target payload, launch a parallel subagent to investigate the failure. Pass the subagent the Prow URL and all previous attempt URLs from Step 3.2.

Almost all blocking jobs install a cluster and then run tests, so the job name alone does not tell you the failure type. Each subagent therefore runs the ci:prow-job-analysis skill, which classifies the failure and routes to the correct specialized reference internally.

Read references/investigation-subagent.md (in this skill's directory) for the required subagent prompt, its placeholder definitions, and the mandatory ANALYSIS_RESULT structured return format. Use that prompt verbatim (substituting the placeholder values) — do NOT paraphrase, shorten, or write a different prompt; the specific instructions in it are critical for analysis quality.

Important: Launch ALL subagents in parallel for maximum speed. Do NOT set the model parameter — let subagents inherit the parent model, as these analysis tasks require a capable model.

Cross-Platform and Cross-Job Failure Pattern Recognition

After collecting subagent results, look for patterns across multiple jobs:

• Same failure across a job family (e.g., all techpreview jobs, all fips jobs, all upgrade jobs): This often indicates a failure specific to that feature set or configuration.
• Same failure across multiple platforms: This often points to a product bug in shared code.
• RHCOS variant isolation: Check whether any failure's root cause or error pattern appears only in jobs of one RHCOS variant and not in jobs of the other variant. A failure is "variant-isolated" when:
  • It appears in one or more RHCOS 10 jobs but in zero RHCOS 9 jobs → failure_scope: "rhcos10-only"
  • It appears in one or more RHCOS 9 jobs but in zero RHCOS 10 jobs → failure_scope: "rhcos9-only"
  • Jobs with rhcos9-default count as RHCOS 9 for this check
  • Jobs with rhcos10-default count as RHCOS 10 for this check
  • Jobs with rhcos9_10 (heterogeneous) count toward both variants for this check
  • Variant isolation is strong diagnostic context — it narrows the root cause to OS-specific changes (kernel, systemd, SELinux, package differences between RHEL 9 and RHEL 10).

Step 4b: Consult Previous Claude Analyses

Read the target payload's payload.json (at SNAPSHOT_DIR/<payloads[0].payload>) and check if a claude-payload-agent async job exists with state Succeeded. If so, fetch the HTML report from its Prow artifacts:

{prow_artifacts_url}/artifacts/claude-payload-agent/openshift-release-analysis-claude-payload-agent/artifacts/payload-analysis-{tag}-summary.html

Convert the Prow URL to a gcsweb URL and use WebFetch to read it.

Important: Previous analyses are a secondary input. Always complete your own analysis first, then compare. Use previous findings to bolster confidence, challenge assumptions, or fill gaps — never adopt conclusions without verifying against the snapshot data.

Step 5: Validate Failure Streaks

After collecting all subagent results, verify that consecutive failures across payloads share the same root cause. A consecutive failure streak does NOT automatically mean the same root cause.

Compare the subagent's root cause analysis for the target payload against previous payload analyses (from Step 4b) or the failure signatures in the snapshot's streak data.

If a job fails in two consecutive payloads but for different reasons, treat each as a separate streak=1 failure with its own originating payload and candidate PRs. Re-split the streak and re-assign originating payloads before proceeding to scoring.

The job-level streak is not a failure mode's originating payload. streak.originating_payload tracks when the job started failing, which merges unrelated modes — an infrastructure blip, a flake, and a real regression all read as one streak. Scoring candidates from a payload that predates the actual regression guarantees misattribution: the causal PR is not even in the candidate set.

For each failure mode, take the originating payload from the matching test_failures.blocking[] entry's first_failed_in. When that is later than the job-level streak's, the job's earlier failures are a different mode — score from first_failed_in. Confirm the test passed in the preceding payload; where that payload has no per-test data, check its child runs rather than assuming it was failing.

Establish this before enumerating candidate PRs (Step 6.1). When the two onsets differ, record both and state which drove scoring.

Step 5b: Adjudicate Conflicting Root Causes

When two or more investigations reach contradictory root causes for the same failure signature (same test, same operation, or same error class — across jobs, across retries, or between a subagent and a previous analysis), the analysis is UNRESOLVED. It is not a tie to be broken by whichever explanation feels more plausible. Resolve it only with discriminating evidence, applying these rules:

• Discriminating evidence must come from the exact failing operation or phase — the specific subcommand, step, or reconcile loop that actually errored, not from adjacent activity.
• "Cleared" requires positive evidence from the failing code path. A candidate is exonerated only by positive evidence that its code path executed and completed without error during the failing operation itself. A candidate succeeding in a different subcommand, phase, or job does not clear it.
• Absence of a log line is not evidence when the log is truncated. If the relevant log was truncated, rotated, or never captured, treat the missing line as unknown, never as proof that a code path did not execute.
• A causal chain must be shown to execute, not merely shown to be possible. Demonstrate that the proposed mechanism actually ran during the failing operation (via timestamps, ordering, or an emitted log/metric). "This change could cause this" is a hypothesis, not a root cause.
• When you override a subagent's conclusion, update the stored per-job root cause so the streak data, YAML, JSON, and HTML all reflect the adjudicated cause. Divergent per-job root causes across outputs are a defect (checked in Step 10).

Tenacity booster: Finding a plausible mechanism is the midpoint of the investigation, not the end. When rival explanations exist, your job is to discriminate between them with evidence from the failing operation — not to stop at the first mechanism that could work. If the evidence cannot discriminate, record the failure mode as UNRESOLVED with its competing hypotheses rather than committing to a guess (a wrong-PR attribution is far more damaging than an honest "unresolved").

Step 6: Collect Investigation Results and Identify Revert Candidates

Wait for all subagents to complete and collect their analysis results. For each failed job, you now have:

• Job name and Prow URL (from snapshot)
• Failure analysis (from subagent)
• Streak data (from snapshot: streak_length, originating_payload, failure_pattern)
• Candidate PRs (from snapshot: originating payload's prs[])

6.1: Correlate Failures with Candidates

For each failed job, cross-reference the failure analysis from the subagent with both the candidate PRs and the RHCOS RPM changes from the originating payload:

• PRs: from summary.json → payloads[].prs[]. Read the PR's code.diff file to check for code-level correlation.
• RHCOS RPM changes: from summary.json → payloads[].rhcos_changes[] for the originating payload, filtered to the RHCOS variant matching the job's rhcos_version. Read the RPM changelog (Step 3.7b) to check for content-level correlation — the changelog is the RPM equivalent of a PR's code.diff.

If a subagent traced the root cause to a PR outside the payload (e.g., an openshift/release PR that modified a CI step registry script), include that PR as a candidate.

Before scoring, mechanically enumerate every distinct failure mode for each job — do not score only the dominant one. A single job can fail for more than one reason (e.g., an install timeout and an unrelated test regression). For each failed job, first write out each distinct failure mode the subagent identified as an explicit list, then run every candidate through the rubric once per failure mode — a candidate that explains failure mode A does not automatically explain failure mode B. Do not collapse a job down to its loudest symptom and score only that. Any failure mode you dismiss as a flake (or as pre-existing) MUST cite the specific evidence for that dismissal — a passing retry with no code change, the same test failing on the accepted baseline, or a known-flaky test ID — never an unsupported "intermittent" label.

Score each (failed job, failure mode, candidate) tuple using the following weighted rubric. The rubric applies to both PR candidates and RHCOS RPM candidates — for RPM candidates, read the RPM changelog where the rubric says "PR's diff":

Maximum possible score is 120, capped at 100. Record the numeric score alongside qualitative rationale.

Every candidate's rationale MUST itemize the score — one line per signal that fired — so the number is auditable rather than asserted:

signal_name: +points — one line of concrete evidence

For example:

error_message_match: +40 — panic "nil pointer in reconcileNode" from build-log appears verbatim in the PR diff (controller.go:214)
component_exclusivity: +30 — sole PR modifying machine-config-operator in the originating payload
new_failure_mode: +30 — job passed the 6 prior payloads; first failed in the originating payload
total: 100

Record this breakdown in the candidate's rationale field in the YAML/JSON output. A bare score with no itemized breakdown is not acceptable.

The recorded confidence score MUST equal min(100, sum of itemized signals), each signal at exactly its defined weight, one line of evidence per claimed signal. No unclaimed points, no unlisted signals.

Apply the rubric mechanically, then verify the top-tier claims. Sum the weights for each signal that fires on concrete evidence. Do NOT adjust the score downward based on speculative counter-arguments like "if this were the sole cause, other jobs would also fail" or "this could be a coincidence" — if the error messages reference the candidate's changes, that's a match, and the fact that some other jobs didn't fail doesn't negate it. But when the raw sum exceeds the cap (you claimed a maximum tier on more than one signal at once), re-verify each maximum-tier claim before recording: is the error-message match a true verbatim string/symbol match (+40), or really only same-subsystem (+10)? Is this genuinely the sole modifier of the component (+30)? Downgrade any tier that does not survive this check. This self-skepticism pass removes tier inflation without weakening genuinely strong matches. Trust the rubric — it exists to prevent both over- and under-attribution.

Infrastructure exclusion — do not let unrelated candidates accumulate points. The rubric measures product-code causation. When the root cause is affirmatively infrastructure (Step 6.4 definition) or an affirmatively-identified CI-config change (Step 3.6), payload component PRs and RHCOS RPM changes with no error-message and no code-path correlation to the failure must score at or near zero. Do not award "new failure mode" or bare "component exclusivity" points to a candidate that merely happens to be present in the payload — "new failure mode" fires only when the failure is plausibly attributable to something that changed. A new symptom whose actual cause is a lease timeout, a quota block, or a step-registry edit is not evidence against an unrelated candidate.

"Intermittent" and "flake" are conclusions requiring evidence, not default labels. Before dismissing a failure as a flake, confirm affirmative evidence for it (e.g., the same job passed on retry with no code change, or it is a known-flaky test that also fails on accepted payloads). First check whether any candidate touches the failing code path: a reproducible failure in code that changed is a regression, not a flake, even if it does not reproduce on every run.

When a failed job ends up with zero causally-linked candidates, state why — explicitly, per job. An empty candidate list is itself a claim: that no payload PR, no RHCOS RPM change, and no CI-infrastructure change (Step 3.6) is causally linked to the failure. Justify it rather than leaving it blank. For each such job, record a one-line rationale explaining why no candidate explains the failure (e.g., "root cause is a Boskos lease timeout — no candidate touches the failing path"; "failure also reproduces on the accepted baseline payload, so it predates every candidate in this originating payload"). State the cross-job correlation explicitly: note whether the same failure mode appears in other failing jobs (pointing to shared infrastructure or a common dependency) or is isolated to this one. A silent empty candidate list is indistinguishable from an un-investigated job and is not acceptable.

6.1b: RHCOS RPM Candidate Notes

RHCOS RPM changes are scored as candidates using the same rubric as PRs. The following notes cover how they differ in practice.

RHCOS RPM changes are NOT revert candidates. They cannot be easily reverted from the payload. Even when an RPM candidate scores >= 85, do NOT propose it as a revert in Step 6.2. Instead, surface it as an "RHCOS RPM candidate" requiring manual investigation by the RHCOS or platform team. Include it in the candidates[] output with type: "rhcos_rpm" (see below) so downstream tooling can distinguish it from PR candidates.

Subpackage dedup. Multiple binary RPMs built from the same source RPM share identical changelogs. When several packages have the same version bump and the same changelog, score one candidate for the logical change — do not list each subpackage separately.

Pinpointing which hop introduced the RHCOS change. The top-level rpm_changelogs[] entries include intermediate hops — some may show changed: 0 (no RPM changes between those two payloads), while others show the actual bump. When the originating payload for a failure mode differs from the baseline, check the intermediate hop's changelog to confirm the RPM change landed in that specific hop, not earlier. This narrows the timing correlation.

Variant isolation as a signal. When a failure mode appears only in jobs of one RHCOS variant and not the other (see Cross-Platform and Cross-Job Failure Pattern Recognition), and the matching variant has RPM changes, this is strong supporting evidence for the RPM candidate — it behaves like component exclusivity for the variant-specific subsystem.

For each RHCOS RPM candidate in candidates[], record the standard fields (confidence_score, rationale with itemized signals, failing_jobs) plus:

• type: "rhcos_rpm" (distinguishes from PR candidates, which have type: "pr")
• rhcos_tag: the RHCOS image stream tag (e.g., rhel-coreos-10)
• rhcos_name: human-readable name (e.g., "Red Hat Enterprise Linux CoreOS 10.2")
• package: the RPM package name (or the logical source package when subpackages are deduped)
• old_version, new_version: the version change
• changelog_evidence: the specific changelog entry or entries that relate to the failure (verbatim text from the RPM changelog diff), or "none" if the changelog does not contain entries relevant to the failure mode

RHCOS RPM candidates have no pr_url, pr_number, component, or title — those fields are PR-only. See the payload-results-yaml skill for the full typed schema.

6.2: Propose Revert Candidates

For each candidate PR with a rubric score of >= 85, mark it as a revert candidate. A PR qualifies when:

1. The failure clearly maps to the PR's changes
2. The timing is exact — the job was passing before the originating payload
3. No other plausible explanation — infrastructure flakiness and platform problems have been ruled out

Per OCP policy, PRs that break payloads MUST be reverted. When confidence is high, the report must clearly state that a revert is required — not optional.

For each revert candidate, record: PR URL, description, component, confidence score with rationale.

Do NOT propose reverts for: Infrastructure failures, flaky tests that also fail on accepted payloads, jobs where analysis is inconclusive, or RHCOS RPM candidates (which have type: "rhcos_rpm" — these cannot be reverted through the normal PR process; they require escalation to the RHCOS or platform team).

Special case — Kubernetes rebase version skew. When the candid

…(truncated)