Wave Executor

Wave Executor

Execute a wave document by spawning parallel agents per wave, pausing at merge gates, and verifying each wave before advancing.

When to Use

• User says "run the plan", "execute the plan", "start wave N", "launch the agents"
• A wave document exists at .context/plans/<slug>.md
• The plan was produced by wave-execution-planner (or follows the same format)

When Not to Use

• No wave document exists — run wave-execution-planner (Mode A) first
• The user wants to update wave status only — use wave-execution-planner (Mode B) instead
• The plan has only 1–2 sequential tasks with no parallelism — just run them directly

Workflow

1. Locate the plan

Ask for the plan slug if not provided. Load .context/plans/<slug>.md.

Read the full document. Identify all waves in order and their current status. Skip waves already marked — DONE.

2. For each pending wave — execute the loop

Repeat steps 2a–2g for every wave that is not — DONE, in order.

2a. Check the gate

Read the > Gate: blockquote at the top of the wave. If it requires a prior wave to be verified, confirm that wave's Verification: checklist is fully ticked ([x]). If not, stop and report the unmet gate to the user.

2b. Extract phases

Parse the wave table or inline task list. For each row / item capture:

• branch — the branch name. In phase tables: the phase identifier (use as branch if no explicit branch). In inline tasks: the value after — branch.
• focus — the task description (Focus column, or phase file content if linked).
• model — the Model column value, or — model: suffix on inline tasks. Default: standard if absent.
• writes — if a Writes column or — writes: annotation is present, capture it. Otherwise derive from the phase file, or leave unspecified and let the agent determine scope from the focus.

2b.5. Resolve tiers to model IDs

Read references/model-map.yaml. For each extracted model tier value, look up the corresponding concrete model ID. If a tier is absent from the map, use the standard entry.

Carry the resolved model ID (not the tier name) forward to step 2d.

2c. Build per-agent prompts

Read references/per-agent-template.md.

For each phase, fill the template slots with the values from step 2b. Append the model-tier addition from references/model-tier-guide.md matching the phase's model value.

Do not paraphrase the focus / task description. Copy it verbatim.

If the phase links to a phase file, read that file and include its full content under "Your task" rather than only the Focus cell value.

2d. Spawn agents in parallel

Send a single response containing one Agent tool call per unblocked phase.

Each call must set:

• subagent_type: "general-purpose"
• model: the resolved model ID from step 2b.5 (e.g. "haiku" for a fast-tier phase)
• isolation: "worktree" for all phases that commit to a branch (omit for phases that commit directly to main)
• description: "Wave N: <branch>"
• prompt: the filled per-agent prompt from step 2c

2e. Wait for all agents to complete

Do not proceed until every agent in the wave has returned.

2f. STOP — merge gate

After all agents complete, report to the user:

"Wave N agents done. Please merge the following branches to main before I continue: [list branches]

Then run the Verification checklist for this wave (copied below) and reply 'verified' when all checks pass."

Copy the wave's Verification: checklist verbatim into your message so the user can run each item.

Wait for the user to reply before continuing.

2g. Update wave status and advance

After the user confirms verification:

1. Run wave-execution-planner Mode B on the wave document to tick the verification checkboxes and mark the wave — DONE.
2. Report which wave is now unblocked.
3. Continue the loop with the next wave.

3. Report completion

After all waves are done:

• Summarise what was executed (waves, branches, agents).
• Confirm the plan's **Status** field is set to Complete.
• List any decisions or blockers flagged by agents during execution.

Anti-Patterns

NEVER paraphrase the task description

WHY: Information loss — the verbatim focus or phase file contains constraints, tool names, and scope boundaries that summaries drop.

BAD Summarise "Triage Mem0, Zep, MemoryOS, Letta via tessl__triage-tool" as "triage memory tools". GOOD Copy the full text verbatim into the per-agent prompt.

NEVER omit the model parameter on Agent calls

WHY: Omitting it silently defaults to the orchestrator's model. For fast-tier mechanical tasks, this wastes significant cost with no quality benefit.

BAD Agent(subagent_type="general-purpose", prompt=...) with no model. GOOD Agent(model="haiku", ...) — resolved from the fast tier in model-map.yaml.

NEVER start the next wave before the gate passes

WHY: Consolidation agents read files written by prior waves. Unmerged branches mean stale reads and incorrect output that is hard to detect.

BAD Proceed to Wave N+1 as soon as Wave N agents return their results. GOOD STOP, ask the user to merge and verify, confirm gate before advancing.

NEVER spawn wave agents sequentially

WHY: Defeats the parallelism that wave planning was designed to achieve.

BAD Spawn one agent, wait for it, then spawn the next. GOOD Send a single response with all parallel agents in one message.

NEVER spawn agents for phases blocked by unmet dependencies

WHY: A phase that needs a prior branch merged will read stale state and produce incorrect output.

BAD Spawn feat/synthesis before feat/rubric is merged (it's in the Blocked on note). GOOD Check each phase's gate / blocked-on annotation; skip and report blocked phases.

References

• Per-agent prompt template — fill for every spawned agent
• Model tier guide — when to use fast / standard / smart
• Model map — resolves tier names to concrete model IDs; edit to switch providers
• Wave format spec — defined in the wave-execution-planner skill (wave-execution-planner/references/wave-format.md)
• Status tracking protocol — defined in the wave-execution-planner skill (wave-execution-planner/references/status-tracking.md); used in step 2g