Deploy To Testnet

Preamble (run first)

# Suiperpower telemetry. Routes through the CLI so projects.json + Convex stay in sync.
# Silent on failure so the skill never blocks. Opt out: SUIPERPOWER_TELEMETRY=off.
#
# AGENT NOTE: when this skill finishes, run the matching completion command:
#   suiperpower track deploy-to-testnet ship completed
# Or use "failed" / "aborted" if it ended that way.
command -v suiperpower >/dev/null 2>&1 && suiperpower track deploy-to-testnet ship started >/dev/null 2>&1 &
true

If TEL_PROMPTED is no, before doing real work, ask the user:

Help suiperpower get better. We track which skills get used and how long they take. No code, no file paths, no PII. Change anytime in ~/.suiperpower/config.json.

A) Sure, anonymous B) No thanks

Write the answer to ~/.suiperpower/config.json telemetryTier field and create ~/.suiperpower/.telemetry-prompted. Then continue.

What this skill does

Runs the testnet deploy flow end to end: validates prerequisites, runs sui client publish, captures the package id and UpgradeCap from the publish output, writes deploy-context.md with the real artifacts, and points the user at the next step.

The flow follows skills/data/guides/deploy-runbook.md for the publish steps and skills/data/guides/package-id-capture.md for the capture rules. Capability handling is non-trivial; the skill never prints capability ids in shared logs and never hardcodes them into client code.

When to use it

• After the Move package compiles and tests pass on localnet.
• Before any frontend work that needs a real on-chain package id.
• Any time the user wants a fresh testnet deployment after a breaking change.

When NOT to use it

• Mainnet deploys. Route to deploy-to-mainnet.
• Localnet runs. Use sui move test and the local validator directly; no deploy-context is written for localnet.
• Pre-test, when the package has not been compiled or unit tested.

If you activated this and the user actually wants something else, consult skills/SKILL_ROUTER.md and hand off.

Inputs

• .suiperpower/build-context.md for the Move package path and module names.
• The user's funded testnet address. If not funded, the skill points at the testnet faucet.
• Sui CLI installed and on testnet env. If not, the skill walks the env switch per skills/data/guides/rpc-wallet-guide.md.

Outputs

A .suiperpower/deploy-context.md entry following the canonical headers from skills/data/specs/phase-handoff.md:

## Deploy, <timestamp>

### Network
- env: testnet
- rpc: <rpc url>
- gas address: <0x...>
- balance before: <SUI>
- balance after: <SUI>

### Package
- package id: <0x...>
- modules: <comma-separated module names>
- digest: <publish digest>
- upgrade cap object: <0x...>
- upgrade cap policy: <compatible | additive | dep-only | immutable>

### Notes
- <anything the user should know about this deploy>

Workflow

1. Preflight

   • Verify Sui CLI is installed and version is at least the version pinned in skills/data/guides/deploy-runbook.md. If not, ask the user to run cargo install --git https://github.com/MystenLabs/sui --branch testnet sui or use the official binary.
   • Verify env is testnet via sui client active-env. If not, switch.
   • Verify the active address has enough SUI for gas. If not, point at the official testnet faucet and pause.
   • Read build-context.md to get the package path. Default to ./move/.

2. Build and check

   • Run sui move build --path <package path>. Surface any error.
   • Run sui move test --path <package path>. If tests fail, do not proceed.

3. Publish

   • Run the publish command per skills/data/guides/deploy-runbook.md: sui client publish <package path> --gas-budget <budget> --json
   • Capture the JSON output to a temp file.

4. Capture artifacts

   • Apply the jq recipe from skills/data/guides/package-id-capture.md to extract:
     • package id
     • digest
     • UpgradeCap object id
   • Cross-check the package id against the modules listed in the build output.

5. Write deploy-context.md

   • Append the new ## Deploy, <timestamp> block per the spec headers.
   • Include the env, RPC, gas address, balances, package id, modules, digest, upgrade cap, and policy.
   • Leave any prior ## Deploy blocks intact (append-only).

6. Verify on-chain

   • Run sui client object <package id> to confirm the package exists.
   • Run sui client object <upgrade cap id> to confirm the cap landed in the active address.

7. Hand off

   • Tell the user the package id explicitly so they can wire it into cli/data/sui-skills.json or their frontend.
   • Recommend deploy-to-mainnet once the testnet deploy has been exercised by a frontend or PTB. Recommend submit-to-sui-overflow if this is the submission deploy.

Quality gate (anti-slop)

Before reporting done:

• Did sui move build and sui move test both pass before publish?
• Was the package id captured from real publish output, not from a manual prompt to the user?
• Was the UpgradeCap object id captured and recorded?
• Was the upgrade policy recorded?
• Was deploy-context.md appended (not overwritten)?
• Were the post-deploy sui client object checks run and surfaced?

If any answer is no, the skill keeps working.

References

On-demand references (load when relevant to the user's question):

• references/preflight-checklist.md: Step-by-step preflight items to verify before publish.
• references/troubleshooting.md: Common testnet publish failures and fixes.

Canonical:

• skills/data/guides/deploy-runbook.md
• skills/data/guides/package-id-capture.md
• skills/data/guides/rpc-wallet-guide.md

Use in your agent

• Claude Code: claude "/suiper:deploy-to-testnet <your message>"
• Codex: codex "/deploy-to-testnet <your message>"
• Grok Build: run grok, then /deploy-to-testnet <your message> in the session
• Cursor: paste a chat message that includes a phrase like "deploy to testnet", or load ~/.cursor/rules/deploy-to-testnet.mdc and reference it.

If you activated this and the user actually wants something else, consult skills/SKILL_ROUTER.md and hand off.