Interpret Mass Spectrum
Analyze MS → mol ion, formula, fragmentation pathways, structural features.
Use When
- MW + formula of unknown
- Confirm synthetic product (mol ion + fragmentation)
- ID impurities / degradation products
- Propose structural features from characteristic frag losses
- Isotope patterns → halogens, S, metals
In
- Req: MS data (m/z + rel int, min full scan)
- Req: Ionization method (EI, ESI, MALDI, CI, APCI, APPI)
- Opt: HRMS exact mass (measured vs calc)
- Opt: Mol formula from other (EA, NMR)
- Opt: MS/MS data (frag of selected precursor)
- Opt: Chrom ctx (LC-MS / GC-MS tR, purity)
Do
Step 1: Ionization Method + Expected Ion Types
Determine what species present before peak assignment:
- Classify ionization:
| Method |
Energy |
Primary Ion |
Fragmentation |
Typical Use |
| EI (70 eV) |
Hard |
M+. (radical cation) |
Extensive |
Small volatile molecules, GC-MS |
| CI |
Soft |
[M+H]+, [M+NH4]+ |
Minimal |
Molecular weight confirmation |
| ESI |
Soft |
[M+H]+, [M+Na]+, [M-H]- |
Minimal |
Polar, biomolecules, LC-MS |
| MALDI |
Soft |
[M+H]+, [M+Na]+, [M+K]+ |
Minimal |
Large molecules, polymers, proteins |
| APCI |
Soft |
[M+H]+, [M-H]- |
Some |
Medium polarity, LC-MS |
- Polarity mode: +ve → cations; -ve → anions. ESI uses both commonly.
- Adducts + clusters: Soft ionization → [M+Na]+ (M+23), [M+K]+ (M+39), [2M+H]+, [2M+Na]+ besides [M+H]+. ID these before mol ion.
- Multiply charged: ESI → m/z = (M + nH) / n. Look for fractional m/z spacing (0.5 Da = z=2).
→ Method documented, expected ion types listed, adducts/clusters ID'd → true mol ion determinable.
If err: Method unknown → examine spectrum for clues: extensive frag → EI; adduct patterns → ESI; matrix peaks → MALDI. Check instrument log.
Step 2: Mol Ion + Mol Formula
ID mol ion peak + derive formula:
- Locate mol ion (M): EI → M+. highest m/z w/ reasonable isotope pattern (may be weak/absent for labile compounds). Soft → ID [M+H]+ / [M+Na]+ + subtract adduct → M.
- N rule: Odd MW → odd # N. Even MW → 0 or even # N.
- DBE: DBE = (2C + 2 + N - H - X) / 2, X = halogens. Ring / π bond = 1 DBE. Benzene = 4, carbonyl = 1.
- HRMS: Exact mass avail → calc formula using mass defect. Compare measured vs candidate formulas in accuracy window (typ < 5 ppm modern instruments).
- Cross-check isotope pattern: Observed must match proposed formula (Step 3).
→ Mol ion ID'd, MW determined, N rule applied, formula proposed (confirmed by HRMS if avail).
If err: No mol ion in EI (common thermally labile / highly branched) → try softer ionization. Ambiguous mol ion → check loss of common small frags from highest m/z (M-1, M-15, M-18 → help ID M).
Step 3: Isotope Patterns
Use isotopic signatures → detect elements:
- Monoisotopic elements: H, C, N, O, F, P, I have characteristic abundances. CHNO only → M+1 ≈ 1.1% per C.
- Halogen patterns:
| Element |
Isotopes |
M : M+2 Ratio |
Visual Pattern |
| 35Cl / 37Cl |
35, 37 |
3 : 1 |
Doublet, 2 Da apart |
| 79Br / 81Br |
79, 81 |
1 : 1 |
Equal doublet, 2 Da apart |
| 2 Cl |
-- |
9 : 6 : 1 |
Triplet |
| 2 Br |
-- |
1 : 2 : 1 |
Triplet |
| 1 Cl + 1 Br |
-- |
3 : 4 : 1 |
Characteristic quartet-like |
- Sulfur: 34S → 4.4% at M+2. M+2 ≈ 4-5% rel M (after 13C2 correction) → ≈ 1 S.
- Silicon: 29Si (5.1%) + 30Si (3.4%) → distinctive M+1 + M+2 contributions.
- Compare calc vs observed: Use proposed formula → theoretical pattern → overlay observed → confirm/refute.
→ Pattern analyzed, Cl/Br/S/Si presence determined, consistent w/ proposed formula.
If err: Isotope res insufficient (low-res instrument) → M+2 unresolvable. Note limitation, rely on exact mass + other spectra for elemental comp.
Step 4: Fragmentation Losses + Key Frag Ions
Map pathways → structural info:
- Catalog major frags: All peaks > 5-10% rel int w/ m/z.
- Neutral losses from mol ion:
| Loss (Da) |
Neutral Lost |
Structural Implication |
| 1 |
H. |
Labile hydrogen |
| 15 |
CH3. |
Methyl group |
| 17 |
OH. |
Hydroxyl |
| 18 |
H2O |
Alcohol, carboxylic acid |
| 27 |
HCN |
Nitrogen heterocycle, amine |
| 28 |
CO or C2H4 |
Carbonyl or ethyl |
| 29 |
CHO. or C2H5. |
Aldehyde or ethyl |
| 31 |
OCH3. or CH2OH. |
Methoxy or hydroxymethyl |
| 32 |
CH3OH |
Methyl ester |
| 35/36 |
Cl./HCl |
Chlorinated compound |
| 44 |
CO2 |
Carboxylic acid, ester |
| 45 |
OC2H5. |
Ethoxy |
| 46 |
NO2. |
Nitro compound |
- Characteristic frag ions:
| m/z |
Ion |
Origin |
| 77 |
C6H5+ |
Phenyl cation |
| 91 |
C7H7+ |
Tropylium (benzyl rearrangement) |
| 105 |
C6H5CO+ |
Benzoyl cation |
| 43 |
CH3CO+ or C3H7+ |
Acetyl or propyl |
| 57 |
C4H9+ or C3H5O+ |
tert-Butyl or acrolein |
| 149 |
Phthalate fragment |
Plasticizer contaminant |
- Map frag pathways: Connect frag ions by successive losses → frag tree from M down to low mass.
- Rearrangement ions: McLafferty (γ-H transfer + β-cleavage) → even-electron ions from carbonyl compounds. Retro-Diels-Alder → characteristic cyclohexene.
→ All major frag ions assigned, neutral losses calc + correlated w/ structure, frag tree built.
If err: Frags don't correspond to simple losses → consider rearrangement. Unassigned frags → unexpected groups, impurities, matrix/BG peaks.
Step 5: Purity + Structure
Evaluate spectrum for purity + assemble proposal:
- Purity check: GC-MS / LC-MS → examine chrom for add'l peaks. Direct-infusion → look for unexpected ions not frags/adducts of analyte.
- BG + contaminant peaks: Common: phthalate plasticizers (m/z 149, 167, 279), column bleed (siloxanes 207, 281, 355, 429 in GC-MS), solvent clusters.
- Structure proposal: Combine formula (Step 2) + isotope (Step 3) + frag (Step 4) → structure / candidate set.
- Rank candidates: Frag tree → rank. Best = explains most frag ions w/ fewest ad hoc.
- Cross-validate: Compare vs NMR, IR, UV-Vis. MS alone rarely unambiguous for novel compounds.
→ Purity assessed, contaminants ID'd if present, structural proposal / ranked candidates consistent w/ all MS + cross-validated where poss.
If err: Multiple components w/o chrom sep → flag mixture, recommend LC-MS / GC-MS reanalysis. No satisfactory proposal → ID which add'l data (HRMS, MS/MS, NMR) would resolve.
Check
Traps
- Mis-ID mol ion: EI → base peak often frag, not M. M = highest m/z w/ reasonable isotope pattern. ESI adducts ([M+Na]+, [2M+H]+) → mistaken for M.
- Ignore N rule: Odd-mass M → odd # N. Forget → impossible formulas.
- Confuse isobaric losses: Loss 28 = CO or C2H4; loss 29 = CHO or C2H5. HRMS / add'l frag → distinguish.
- Neglect multiply charged: ESI → 2+/3+ at half/third expected m/z. Non-integer spacing between isotope peaks → multi charge diagnostic.
- Over-interpret low-abundance: Peaks < 1-2% rel int → noise, isotope contribs, minor contaminants, not real frags.
- Assume pure: Many real spectra = mixtures. Check chrom purity + look for ions inconsistent w/ proposed structure.
→
interpret-nmr-spectrum — connectivity + H environments → structural confirm
interpret-ir-spectrum — func groups explaining observed frag
interpret-uv-vis-spectrum — chromophores in analyte
interpret-raman-spectrum — complementary vibrational
plan-spectroscopic-analysis — select + sequence techniques pre-acquisition
interpret-chromatogram — GC/LC chrom data coupled w/ MS
1---2name: interpret-mass-spectrum-103description: Systematic MS interpret → determine mol formula, fragmentation pathways, propose structure. Ionization method, mol ion ID, isotope pattern, common frag losses, purity eval.4license: MIT5---67# Interpret Mass Spectrum89Analyze MS → mol ion, formula, fragmentation pathways, structural features.1011## Use When1213- MW + formula of unknown14- Confirm synthetic product (mol ion + fragmentation)15- ID impurities / degradation products16- Propose structural features from characteristic frag losses17- Isotope patterns → halogens, S, metals1819## In2021- **Req**: MS data (m/z + rel int, min full scan)22- **Req**: Ionization method (EI, ESI, MALDI, CI, APCI, APPI)23- **Opt**: HRMS exact mass (measured vs calc)24- **Opt**: Mol formula from other (EA, NMR)25- **Opt**: MS/MS data (frag of selected precursor)26- **Opt**: Chrom ctx (LC-MS / GC-MS tR, purity)2728## Do2930### Step 1: Ionization Method + Expected Ion Types3132Determine what species present before peak assignment:33341. **Classify ionization**:3536| Method | Energy | Primary Ion | Fragmentation | Typical Use |37|---|---|---|---|---|38| EI (70 eV) | Hard | M+. (radical cation) | Extensive | Small volatile molecules, GC-MS |39| CI | Soft | [M+H]+, [M+NH4]+ | Minimal | Molecular weight confirmation |40| ESI | Soft | [M+H]+, [M+Na]+, [M-H]- | Minimal | Polar, biomolecules, LC-MS |41| MALDI | Soft | [M+H]+, [M+Na]+, [M+K]+ | Minimal | Large molecules, polymers, proteins |42| APCI | Soft | [M+H]+, [M-H]- | Some | Medium polarity, LC-MS |43442. **Polarity mode**: +ve → cations; -ve → anions. ESI uses both commonly.453. **Adducts + clusters**: Soft ionization → [M+Na]+ (M+23), [M+K]+ (M+39), [2M+H]+, [2M+Na]+ besides [M+H]+. ID these before mol ion.464. **Multiply charged**: ESI → m/z = (M + nH) / n. Look for fractional m/z spacing (0.5 Da = z=2).4748→ Method documented, expected ion types listed, adducts/clusters ID'd → true mol ion determinable.4950**If err:** Method unknown → examine spectrum for clues: extensive frag → EI; adduct patterns → ESI; matrix peaks → MALDI. Check instrument log.5152### Step 2: Mol Ion + Mol Formula5354ID mol ion peak + derive formula:55561. **Locate mol ion (M)**: EI → M+. highest m/z w/ reasonable isotope pattern (may be weak/absent for labile compounds). Soft → ID [M+H]+ / [M+Na]+ + subtract adduct → M.572. **N rule**: Odd MW → odd # N. Even MW → 0 or even # N.583. **DBE**: DBE = (2C + 2 + N - H - X) / 2, X = halogens. Ring / π bond = 1 DBE. Benzene = 4, carbonyl = 1.594. **HRMS**: Exact mass avail → calc formula using mass defect. Compare measured vs candidate formulas in accuracy window (typ < 5 ppm modern instruments).605. **Cross-check isotope pattern**: Observed must match proposed formula (Step 3).6162→ Mol ion ID'd, MW determined, N rule applied, formula proposed (confirmed by HRMS if avail).6364**If err:** No mol ion in EI (common thermally labile / highly branched) → try softer ionization. Ambiguous mol ion → check loss of common small frags from highest m/z (M-1, M-15, M-18 → help ID M).6566### Step 3: Isotope Patterns6768Use isotopic signatures → detect elements:69701. **Monoisotopic elements**: H, C, N, O, F, P, I have characteristic abundances. CHNO only → M+1 ≈ 1.1% per C.712. **Halogen patterns**:7273| Element | Isotopes | M : M+2 Ratio | Visual Pattern |74|---|---|---|---|75| 35Cl / 37Cl | 35, 37 | 3 : 1 | Doublet, 2 Da apart |76| 79Br / 81Br | 79, 81 | 1 : 1 | Equal doublet, 2 Da apart |77| 2 Cl | -- | 9 : 6 : 1 | Triplet |78| 2 Br | -- | 1 : 2 : 1 | Triplet |79| 1 Cl + 1 Br | -- | 3 : 4 : 1 | Characteristic quartet-like |80813. **Sulfur**: 34S → 4.4% at M+2. M+2 ≈ 4-5% rel M (after 13C2 correction) → ≈ 1 S.824. **Silicon**: 29Si (5.1%) + 30Si (3.4%) → distinctive M+1 + M+2 contributions.835. **Compare calc vs observed**: Use proposed formula → theoretical pattern → overlay observed → confirm/refute.8485→ Pattern analyzed, Cl/Br/S/Si presence determined, consistent w/ proposed formula.8687**If err:** Isotope res insufficient (low-res instrument) → M+2 unresolvable. Note limitation, rely on exact mass + other spectra for elemental comp.8889### Step 4: Fragmentation Losses + Key Frag Ions9091Map pathways → structural info:92931. **Catalog major frags**: All peaks > 5-10% rel int w/ m/z.942. **Neutral losses from mol ion**:9596| Loss (Da) | Neutral Lost | Structural Implication |97|---|---|---|98| 1 | H. | Labile hydrogen |99| 15 | CH3. | Methyl group |100| 17 | OH. | Hydroxyl |101| 18 | H2O | Alcohol, carboxylic acid |102| 27 | HCN | Nitrogen heterocycle, amine |103| 28 | CO or C2H4 | Carbonyl or ethyl |104| 29 | CHO. or C2H5. | Aldehyde or ethyl |105| 31 | OCH3. or CH2OH. | Methoxy or hydroxymethyl |106| 32 | CH3OH | Methyl ester |107| 35/36 | Cl./HCl | Chlorinated compound |108| 44 | CO2 | Carboxylic acid, ester |109| 45 | OC2H5. | Ethoxy |110| 46 | NO2. | Nitro compound |1111123. **Characteristic frag ions**:113114| m/z | Ion | Origin |115|---|---|---|116| 77 | C6H5+ | Phenyl cation |117| 91 | C7H7+ | Tropylium (benzyl rearrangement) |118| 105 | C6H5CO+ | Benzoyl cation |119| 43 | CH3CO+ or C3H7+ | Acetyl or propyl |120| 57 | C4H9+ or C3H5O+ | tert-Butyl or acrolein |121| 149 | Phthalate fragment | Plasticizer contaminant |1221234. **Map frag pathways**: Connect frag ions by successive losses → frag tree from M down to low mass.1245. **Rearrangement ions**: McLafferty (γ-H transfer + β-cleavage) → even-electron ions from carbonyl compounds. Retro-Diels-Alder → characteristic cyclohexene.125126→ All major frag ions assigned, neutral losses calc + correlated w/ structure, frag tree built.127128**If err:** Frags don't correspond to simple losses → consider rearrangement. Unassigned frags → unexpected groups, impurities, matrix/BG peaks.129130### Step 5: Purity + Structure131132Evaluate spectrum for purity + assemble proposal:1331341. **Purity check**: GC-MS / LC-MS → examine chrom for add'l peaks. Direct-infusion → look for unexpected ions not frags/adducts of analyte.1352. **BG + contaminant peaks**: Common: phthalate plasticizers (m/z 149, 167, 279), column bleed (siloxanes 207, 281, 355, 429 in GC-MS), solvent clusters.1363. **Structure proposal**: Combine formula (Step 2) + isotope (Step 3) + frag (Step 4) → structure / candidate set.1374. **Rank candidates**: Frag tree → rank. Best = explains most frag ions w/ fewest ad hoc.1385. **Cross-validate**: Compare vs NMR, IR, UV-Vis. MS alone rarely unambiguous for novel compounds.139140→ Purity assessed, contaminants ID'd if present, structural proposal / ranked candidates consistent w/ all MS + cross-validated where poss.141142**If err:** Multiple components w/o chrom sep → flag mixture, recommend LC-MS / GC-MS reanalysis. No satisfactory proposal → ID which add'l data (HRMS, MS/MS, NMR) would resolve.143144## Check145146- [ ] Ionization method ID'd + expected ion types documented147- [ ] Mol ion located + distinguished from adducts, frags, clusters148- [ ] N rule applied + consistent w/ proposed formula149- [ ] DBE calc + accounted for in structure150- [ ] Isotope pattern matches formula151- [ ] Major frag ions assigned w/ neutral losses + structural rationale152- [ ] Frag tree built M → low mass153- [ ] Contaminant + BG peaks ID'd + excluded154- [ ] Proposal cross-validated w/ other spectra155156## Traps157158- **Mis-ID mol ion**: EI → base peak often frag, not M. M = highest m/z w/ reasonable isotope pattern. ESI adducts ([M+Na]+, [2M+H]+) → mistaken for M.159- **Ignore N rule**: Odd-mass M → odd # N. Forget → impossible formulas.160- **Confuse isobaric losses**: Loss 28 = CO or C2H4; loss 29 = CHO or C2H5. HRMS / add'l frag → distinguish.161- **Neglect multiply charged**: ESI → 2+/3+ at half/third expected m/z. Non-integer spacing between isotope peaks → multi charge diagnostic.162- **Over-interpret low-abundance**: Peaks < 1-2% rel int → noise, isotope contribs, minor contaminants, not real frags.163- **Assume pure**: Many real spectra = mixtures. Check chrom purity + look for ions inconsistent w/ proposed structure.164165## →166167- `interpret-nmr-spectrum` — connectivity + H environments → structural confirm168- `interpret-ir-spectrum` — func groups explaining observed frag169- `interpret-uv-vis-spectrum` — chromophores in analyte170- `interpret-raman-spectrum` — complementary vibrational171- `plan-spectroscopic-analysis` — select + sequence techniques pre-acquisition172- `interpret-chromatogram` — GC/LC chrom data coupled w/ MS