Bio Read Alignment Bwa Alignment

Version Compatibility

Reference examples tested with: bwa-mem2 2.2.1+, bwa 0.7.17+, samtools 1.19+

Before using code patterns, verify installed versions match. If versions differ:

• CLI: <tool> --version then <tool> --help to confirm flags

If code throws ImportError, AttributeError, or TypeError, introspect the installed package and adapt the example to match the actual API rather than retrying.

BWA-MEM2 Alignment -- Read Groups, the Reference, and the Output Contract Decide Downstream Truth

"Align my DNA reads" -> Map reads to a reference with seed-and-extend, inject read groups, and stream to a sorted BAM -- because the aligner is the easy part: the reference analysis set, the @RG metadata, the -M/-Y output flags, and the dedup ordering are the decisions that silently determine whether variant calling works.

• CLI: bwa-mem2 mem -t 8 -R '@RG\tID:s1\tSM:s1\tPL:ILLUMINA\tLB:lib1' ref.fa R1.fq.gz R2.fq.gz | samtools sort -@4 -o aligned.bam -

Scope: DNA short-read mapping with bwa-mem2 (and original BWA-MEM / bwa-aln), the GRCh38 analysis-set choice (below), and the output contract it must satisfy for GATK/DeepVariant/SV callers. BAM sort/dedup/index/stats, the QC gate (flagstat/idxstats interpretation), and contig-naming reconciliation -> alignment-files. The cross-tool MAPQ scale -> alignment-files/sam-bam-basics. Read trimming/QC -> read-qc. Variant calling -> variant-calling. Structural-variant calling consumes the split reads produced here -> variant-calling/structural-variant-calling. OUT OF SCOPE: RNA (use star-alignment/hisat2-alignment), long reads (long-read-sequencing/long-read-alignment), bisulfite (methylation-analysis/bismark-alignment).

The Single Most Important Modern Insight

1. Read groups are a hard contract, not metadata decoration. GATK (HaplotypeCaller/Mutect2/BQSR) and Picard refuse to run or behave wrongly without @RG. SM names the sample callers group by; ID is the BQSR error-model unit; PL sets the error model; LB is the unit MarkDuplicates dedups within (two reads at the same coordinate from different libraries are NOT duplicates). Inject them at mapping time with -R; adding them later (Picard AddOrReplaceReadGroups) is a full BAM rewrite. The catastrophic error is a clean-looking BAM that GATK rejects or mis-merges because SM/LB are missing.
2. On GRCh38, ALT/decoy handling is a correctness decision and a blind +ALT mapping is actively worse than no ALT. ALT contigs are alternate haplotypes of hyperpolymorphic loci (MHC/HLA); a read matches the primary copy AND the ALT copy, becomes a multimapper, and MAPQ collapses to 0 -- so variant callers drop it and HLA variants vanish. bwa-mem rescues this only if the <idxbase>.alt file is present (it then scores non-ALT hits against non-ALT hits only); adding ALT contigs to the FASTA WITHOUT the .alt imports the ambiguity and discards the fix. Use a decoy (hs38d1) always -- it absorbs reads from sequence missing from the primary assembly that would otherwise mismap and make recurrent false SNPs. The analysis-set layering is below.
3. The -M/-Y flags and the dedup ordering are downstream contracts that fail silently. -M marks split (chimeric) pieces as secondary (0x100) for legacy Picard -- but modern tools read supplementary (0x800) natively, and -M hides the split-read evidence SV callers need, so do NOT use it for SV work; use -Y (soft-clip supplementary) so every split piece keeps its full sequence. Duplicate marking has a strict order: collate (name) -> fixmate -m -> sort (coordinate) -> markdup; the -m adds the mate-score/MC tags markdup requires, fixmate needs mates adjacent, markdup needs coordinate order. Any other order silently produces wrong duplicate flags.

What MAPQ Means Here (and what it does not)

bwa-mem MAPQ runs 0-60 and is an ordinal confidence rank derived from the gap between the best and second-best alignment score and the seed coverage -- it is NOT a calibrated -10*log10 P(wrong). It clusters bimodally at 0 (a competing locus scores as well -> multimapper) and 60 (no competitor, good seed support); the middle is sparse. It models only repeat ambiguity, not contamination or heuristic error, so MAPQ 60 means "no competing locus found," not "P(wrong)=1e-6". A -q 20 pre-filter drops most multimappers; rely on the caller's own MAPQ handling (GATK ignores MAPQ-0 and duplicates) rather than double-filtering aggressively. This scale is bwa-specific -- a -q 60 "unique" filter empties a Bowtie2 (cap 42/44) or STAR (255=unique) BAM; see alignment-files/sam-bam-basics for the cross-tool scale.

Tool Taxonomy

Decision Tree by Scenario

Default when uncertain: bwa-mem2 mem with read groups, streamed to a coordinate-sorted BAM, on a decoy-containing GRCh38 analysis set; add -Y for any pipeline that calls SVs.

Build Index

bwa-mem2 index reference.fa
# emits reference.fa.0123 .amb .ann .bwt.2bit.64 .pac  (NOT interchangeable with `bwa index`'s .bwt/.sa)

For human DNA, obtain the decoy/ALT analysis set rather than a bare GRCh38: bwakit's run-gen-ref hs38DH downloads hs38DH.fa (primary + ALT + hs38d1 decoy + HLA) AND the hs38DH.fa.alt lift file, which must sit next to the index basename for ALT-aware mapping; the GATK/Broad resource bundle ships an equivalent decoy reference. Pick the layer by what the downstream caller can handle: no-alt + decoy (hs38) when the caller is not ALT-aware (the safe minimum), or full + decoy (hs38DH) with ALT-aware mapping plus bwa-postalt.js when MHC/HLA accuracy matters -- mismatching mapper-awareness to the analysis set silently degrades MHC/segdup accuracy. Use GRCh38 over GRCh37, and never mix builds across a cohort.

Align with Read Groups, Stream to a Sorted BAM

bwa-mem2 mem -t 8 \
    -R '@RG\tID:sample1\tSM:sample1\tPL:ILLUMINA\tLB:lib1' \
    reference.fa reads_1.fq.gz reads_2.fq.gz | \
    samtools sort -@ 4 -o aligned.sorted.bam -
samtools index aligned.sorted.bam
# single-end: drop reads_2.fq.gz. The literal \t in -R must survive the shell (single quotes do this).

Mark Duplicates (the strict ordering)

# collate -> fixmate -m -> sort -> markdup. -m adds the ms/MC tags markdup requires.
bwa-mem2 mem -t 8 -R '@RG\tID:s1\tSM:s1\tPL:ILLUMINA\tLB:lib1' reference.fa R1.fq.gz R2.fq.gz | \
    samtools collate -@ 4 -O -u - | \
    samtools fixmate -m -@ 4 -u - - | \
    samtools sort -@ 4 -u - | \
    samtools markdup -@ 4 - aligned.markdup.bam
samtools index aligned.markdup.bam
# NEVER run this on amplicon/multiplex-PCR data: identical primer-defined ends are by design, so
# markdup deletes almost all real coverage. Use UMIs (fgbio/UMI-tools) for PCR-dup removal there.

SV / Split-Read Mapping

# -Y soft-clips supplementary alignments so every split piece keeps its full sequence (SA-tag chain).
# Do NOT add -M (it demotes split pieces to secondary and hides the SV evidence).
bwa-mem2 mem -t 8 -Y -R '@RG\tID:s1\tSM:s1\tPL:ILLUMINA' reference.fa R1.fq.gz R2.fq.gz | \
    samtools sort -@ 4 -o aligned.sv.bam -

Reproducible Output Across Thread Counts

# Per-batch insert-size estimation makes default multithreaded output vary; -K pins the batch size.
bwa-mem2 mem -t 8 -K 100000000 -Y \
    -R '@RG\tID:s1\tSM:s1\tPL:ILLUMINA\tLB:lib1' \
    reference.fa R1.fq.gz R2.fq.gz | samtools sort -@ 4 -o aligned.bam -

Ancient / Very Short Damaged DNA

# mem's 19-mer seed fails on short deaminated reads; bwa aln backtracks with no exact-seed requirement.
bwa index reference.fa
bwa aln -l 1024 -n 0.02 -o 2 -t 8 reference.fa reads.fq.gz > reads.sai
bwa samse reference.fa reads.sai reads.fq.gz | samtools sort -o ancient.bam -
# -l 1024 disables the seed (seed longer than the read); -n relaxes edit distance; -o 2 allows gaps.
# The -n value is benchmark-dependent (commonly ~0.01-0.03); treat as a tunable starting point.

Key Parameters (verified against bwa/bwa-mem2 source defaults)

Per-Method Failure Modes

Missing read groups

Trigger: mapping without -R '@RG...'. Mechanism: GATK groups reads by SM and models error by ID/LB. Symptom: GATK errors ("no read group"), or MarkDuplicates/BQSR misbehave; samples cannot be told apart. Fix: inject SM/ID/PL/LB at mapping time; Picard AddOrReplaceReadGroups is a rewrite if missed.

GRCh38 + ALT without the .alt file

Trigger: ALT contigs in the FASTA but no <idxbase>.alt. Mechanism: ALT copies become ordinary contigs, so every MHC/HLA read multimaps and MAPQ collapses to 0. Symptom: a MAPQ-0 spike and missing variants in MHC/HLA. Fix: supply the .alt (alt-aware mapping) + bwa-postalt.js, or use a no-alt + decoy analysis set if not ALT-aware (see Build Index above).

-M used in an SV pipeline

Trigger: bwa-mem2 mem -M ... then split-read SV calling. Mechanism: -M marks split pieces secondary (0x100), which SV callers and MarkDuplicates skip. Symptom: SV caller finds little split-read support. Fix: drop -M, add -Y, then dedup, then call -> variant-calling/structural-variant-calling.

fixmate without -m, or wrong dedup order

Trigger: samtools markdup on a name-sorted BAM, or fixmate without -m. Mechanism: markdup needs coordinate order plus the ms/MC tags -m writes. Symptom: silently wrong duplicate flags; over- or under-marking. Fix: collate -> fixmate -m -> sort -> markdup -> alignment-files/duplicate-handling.

Index built with the wrong tool

Trigger: pointing bwa-mem2 at a bwa index directory or vice versa. Mechanism: bwa-mem2 uses .bwt.2bit.64; bwa uses .bwt/.sa. Symptom: "fail to locate the index" / format error. Fix: rebuild with the matching tool (bwa-mem2 index).

Reference bias at heterozygous sites

Trigger: allele-specific analysis (ASE, allelic ChIP/ATAC, low-VAF somatic) off a raw BAM. Mechanism: the alt-allele read carries an extra mismatch, sometimes failing the 19-mer seed -> reference allele over-counted. Symptom: false allelic imbalance toward reference; depressed alt-allele VAF. Fix: WASP-filter (re-map allele-swapped reads, keep only if placement is unchanged), N-mask, a personalized reference, or a SNP-graph/pangenome.

Quantitative Thresholds

Common Errors

References

• Li H. 2013. Aligning sequence reads, clone sequences and assembly contigs with BWA-MEM. arXiv:1303.3997.
• Li H, Durbin R. 2009. Fast and accurate short read alignment with Burrows-Wheeler transform. Bioinformatics 25:1754-1760.
• Li H, Durbin R. 2010. Fast and accurate long-read alignment with Burrows-Wheeler transform. Bioinformatics 26:589-595.
• Vasimuddin M, Misra S, Li H, Aluru S. 2019. Efficient architecture-aware acceleration of BWA-MEM for multicore systems. IEEE IPDPS 2019:314-324.
• Li H, Handsaker B, Wysoker A, et al. 2009. The Sequence Alignment/Map format and SAMtools. Bioinformatics 25:2078-2079.
• van de Geijn B, McVicker G, Gilad Y, Pritchard JK. 2015. WASP: allele-specific software for robust molecular quantitative trait locus discovery. Nat Methods 12:1061-1063.

Related Skills

• bowtie2-alignment - ChIP/ATAC DNA mapping with end-to-end vs local modes
• star-alignment - RNA splice-aware alignment (when reads cross junctions)
• read-qc/fastp-workflow - Trim and QC reads before alignment
• read-qc/umi-processing - UMI extraction/dedup for amplicon and low-input libraries (do not coordinate-dedup amplicon)
• alignment-files/duplicate-handling - Mark/remove duplicates; UMI-aware dedup
• alignment-files/sam-bam-basics - SAM flags, CIGAR, the cross-tool MAPQ scale, SA tags
• alignment-files/bam-statistics - flagstat/idxstats/stats QC gate; what a high mapping rate hides
• variant-calling/variant-calling - Call variants from the aligned BAM
• variant-calling/structural-variant-calling - SV calling from split/discordant reads (needs -Y)