Bio Workflows Somatic Variant Pipeline

Version Compatibility

Reference examples tested with: GATK 4.5+, Strelka2 2.9+, Manta 1.6+, Ensembl VEP 111+, bcftools 1.19+

Before using code patterns, verify installed versions match. If versions differ:

• CLI: <tool> --version then <tool> --help to confirm flags

If code throws ImportError, AttributeError, or TypeError, introspect the installed package and adapt the example to match the actual API rather than retrying.

Note: this is a WORKFLOW skill - it wires the somatic-specific chain and the DECISIONS between steps. Component mechanism (caller internals, filter thresholds, annotation, CNV) lives in the cross-referenced component skills; interpretation lives in variant-calling/clinical-interpretation and uses the AMP/ASCO/CAP tier system, NOT germline ACMG.

Somatic Variant Pipeline

"Call somatic mutations from my tumor-normal pair" -> Orchestrate somatic SNV/indel calling (Mutect2 or Strelka2) with panel-of-normals + germline-resource priors, contamination and orientation-bias filtering, then somatic SV/CNV, then tier/oncogenicity interpretation.

• CLI: gatk Mutect2 (+ FilterMutectCalls chain), configureStrelkaSomaticWorkflow.py (Strelka2), configManta.py (Manta SV), VEP/Funcotator for annotation.

The governing principle

A somatic callset is not a fact about the tumor; it is a joint property of (tumor, matched normal, caller, filters, reference). Three consequences drive every decision in this pipeline:

1. There is no universal somatic truth set. The ICGC-TCGA DREAM Mutation Calling challenge (Alioto 2015 Nat Commun 6:10001) gave expert teams the SAME tumor-normal WGS and got widely varying call rates and low SNV concordance - indels and SVs far worse. Somatic reproducibility is intrinsically worse than germline (low VAF, subclonality, purity/ploidy, normal contamination) and there is still no GIAB-grade generalizable somatic reference. Practical corollary: pin the pipeline, benchmark against orthogonal validation for the assay, and prefer multi-caller consensus where feasible - do not treat one caller's VCF as ground truth.
2. Somatic variants are sub-1.0 VAF and depth/purity-limited. Unlike a germline 0/0.5/1.0 genotype, a somatic variant sits at a continuous allele fraction set by tumor purity, local copy number, and clonal fraction. Detecting a low-VAF subclonal or low-purity variant is a depth problem (the somatic regime is the one place more coverage genuinely helps). This is why Mutect2 uses a somatic likelihood model, not a diploid genotyper.
3. Somatic interpretation uses a DIFFERENT framework. Never apply germline ACMG (PVS1/PM2/PP3) to a tumor variant - it is a category error. Somatic variants are classified by clinical actionability (AMP/ASCO/CAP tiers, Li 2017) and oncogenicity (ClinGen/CGC/VICC, Horak 2022), and the tier is tumor-type-specific. See the interpretation section and variant-calling/clinical-interpretation.

Pipeline map

Tumor BAM + matched Normal BAM   (aligned, dedup'd, BQSR - see read-alignment/*)
    |
    ├── SNV/indel calling
    │     Mutect2 (GATK)    - somatic likelihood, tumor+normal in one command
    │     Strelka2          - faster; pair with Manta candidateSmallIndels
    │
    ├── Somatic-specific filtering  (the four artifact/germline removers, below)
    │     PoN + germline-resource -> Mutect2 call
    │     LearnReadOrientationModel  (FFPE/oxoG)
    │     GetPileupSummaries -> CalculateContamination
    │     FilterMutectCalls (consumes all three) -> PASS somatic VCF
    │
    ├── Structural variants     -> variant-calling/structural-variant-calling (Manta somatic mode)
    ├── Copy number + purity/ploidy -> copy-number/cnvkit-analysis (purity feeds VAF reasoning)
    ├── Annotation (normalize FIRST) -> variant-calling/variant-annotation (VEP/Funcotator)
    │
    └── Interpretation -> variant-calling/clinical-interpretation
          AMP/ASCO/CAP Tier I-IV + oncogenicity (Horak) + TMB/MSI/signatures

The four somatic-specific filters - what each removes

The machinery that separates somatic calling from germline is four independent artifact/germline removers. Knowing WHICH false-positive class each addresses is the core decision - do not treat them as interchangeable boilerplate.

PoN and germline-resource act at CALL time (priors passed to Mutect2); contamination and orientation-bias are learned separately and injected at FILTER time (FilterMutectCalls). The tumor-only trap: without a matched normal, the PoN and germline resource are the ONLY things removing germline and artifacts, so both must be assay-matched and current, and the false-positive rate is materially higher.

Mutect2 tumor-normal workflow

The end-to-end chained script is in examples/run_mutect2.sh; the steps and their decisions:

Step 1: Build a Panel of Normals (do once per assay)

# Each normal called in tumor-only mode; --max-mnp-distance 0 is REQUIRED for GenomicsDBImport
for normal in normal1.bam normal2.bam normal3.bam; do
    s=$(basename "$normal" .bam)
    gatk Mutect2 -R reference.fa -I "$normal" --max-mnp-distance 0 -O "${s}.vcf.gz"
done

gatk GenomicsDBImport -R reference.fa --genomicsdb-workspace-path pon_db \
    -V normal1.vcf.gz -V normal2.vcf.gz -V normal3.vcf.gz -L intervals.bed

gatk CreateSomaticPanelOfNormals -R reference.fa -V gendb://pon_db -O pon.vcf.gz

A PoN needs 40+ normals from the same platform/chemistry to capture recurrent artifacts; a PoN from a different assay imports the wrong artifact profile and misses real ones. Do NOT build a PoN from tumor-adjacent normals if they may carry tumor-in-normal contamination.

Step 2: Call somatic variants (tumor + normal in one command)

gatk Mutect2 -R reference.fa \
    -I tumor.bam -I normal.bam -normal normal_sample_name \
    --germline-resource af-only-gnomad.vcf.gz \
    --panel-of-normals pon.vcf.gz \
    --f1r2-tar-gz f1r2.tar.gz \
    -O unfiltered.vcf.gz

-normal takes the normal read-group SM name (not the filename). --f1r2-tar-gz collects the read-orientation counts needed in Step 3 - omit it and orientation-bias filtering is impossible. Mutect2 also writes unfiltered.vcf.gz.stats, which FilterMutectCalls reads automatically.

Step 3: Learn the orientation-bias model

gatk LearnReadOrientationModel -I f1r2.tar.gz -O read-orientation-model.tar.gz

Models the strand-orientation artifacts (oxoG C>A/G>T from oxidative shearing damage; FFPE cytosine-deamination C>T/G>A). These masquerade as low-VAF somatic SNVs; the model lets FilterMutectCalls down-weight them by their F1R2/F2R1 imbalance.

Step 4: Estimate contamination

gatk GetPileupSummaries -I tumor.bam \
    -V small_exac_common_3.vcf.gz -L small_exac_common_3.vcf.gz -O tumor_pileups.table
gatk GetPileupSummaries -I normal.bam \
    -V small_exac_common_3.vcf.gz -L small_exac_common_3.vcf.gz -O normal_pileups.table

gatk CalculateContamination -I tumor_pileups.table -matched normal_pileups.table \
    -O contamination.table --tumor-segmentation segments.table

GetPileupSummaries uses a COMMON biallelic-SNP sites resource (e.g. small_exac_common_3.vcf.gz), not the af-only-gnomAD used for the germline prior - it needs sites with a known population AF where reference/alt read counts reveal foreign DNA. --tumor-segmentation also captures allelic-copy segments that feed the filter.

Step 5: Filter, then extract PASS

gatk FilterMutectCalls -R reference.fa -V unfiltered.vcf.gz \
    --contamination-table contamination.table \
    --tumor-segmentation segments.table \
    --ob-priors read-orientation-model.tar.gz \
    -O filtered.vcf.gz

bcftools view -f PASS filtered.vcf.gz -Oz -o somatic_final.vcf.gz
bcftools index -t somatic_final.vcf.gz

FilterMutectCalls applies a single joint model (contamination + orientation + segmentation + the built-in weak-evidence/germline/strand filters) and sets a per-variant FILTER. Never hand-tune individual thresholds first - the filter is calibrated to balance them together.

Tumor-only mode and its caveats

When no matched normal exists (archival FFPE, cell lines, legacy cohorts):

gatk Mutect2 -R reference.fa -I tumor.bam \
    --germline-resource af-only-gnomad.vcf.gz \
    --panel-of-normals pon.vcf.gz \
    -O tumor_only.vcf.gz

Decision framing: with no normal, every germline variant is a candidate somatic call, and only the PoN (artifacts) and gnomAD prior (germline) remove them - so both must be assay-matched and the false-positive rate rises sharply. High-VAF (~50% or ~100%) calls are especially suspect for germline. Tumor-only cannot cleanly separate somatic from germline, which creates a disclosure problem (a germline pathogenic finding surfaced as "somatic") - see the interpretation section. Paired tumor-normal is the defensible design; tumor-only requires explicit germline-subtraction logic and reporting caveats.

VAF, purity, ploidy, and clonality

Somatic VAF is not a genotype - it is (clonal_fraction x mutation_copies) / local_total_copies, scaled by tumor purity. Reasoning consequences:

• Purity sets sensitivity. At 30% purity a truly clonal heterozygous mutation in diploid regions sits near ~15% VAF; at 10% purity near ~5%. Low-purity samples need higher depth to call the same variant - the one regime where "sequence deeper" is the correct fix (contrast germline, which saturates ~30-35x).
• Clonal vs subclonal. High-VAF (adjusted for purity/copy number) variants are clonal (present in most cells, likely early drivers); low-VAF are subclonal (later, spatially/temporally heterogeneous). Clonality informs driver-vs-passenger and treatment-resistance reasoning.
• Copy number confounds VAF. A mutation on an amplified allele reads high; on a deleted/LOH background it reads near 1.0. Interpret VAF only alongside local copy number and purity - run copy-number/cnvkit-analysis (or PURPLE) to get purity/ploidy and correct VAF to cancer-cell fraction before calling something subclonal.

Strelka2 (faster alternative / consensus arm)

# Run Manta first; its small-indel candidates sharpen Strelka2 indel calls
configManta.py --normalBam normal.bam --tumorBam tumor.bam \
    --referenceFasta reference.fa --runDir manta_run
manta_run/runWorkflow.py -m local -j 16

configureStrelkaSomaticWorkflow.py \
    --normalBam normal.bam --tumorBam tumor.bam --referenceFasta reference.fa \
    --indelCandidates manta_run/results/variants/candidateSmallIndels.vcf.gz \
    --runDir strelka_run
strelka_run/runWorkflow.py -m local -j 16

bcftools concat \
    strelka_run/results/variants/somatic.snvs.vcf.gz \
    strelka_run/results/variants/somatic.indels.vcf.gz \
    -a -Oz -o strelka_somatic.vcf.gz

Strelka2 is faster and strong on indels (Kim 2018 Nat Methods 15:591); passing Manta's candidateSmallIndels.vcf.gz via --indelCandidates is the documented coupling that improves Strelka2 indel recall.

Multi-caller consensus and reproducibility

Given the Alioto/DREAM discordance, running independent callers and requiring agreement raises precision - the concordant core is the reproducible callset:

# Intersect PASS calls from callers with uncorrelated error modes (2/3 agreement)
bcftools isec -n+2 -p consensus_dir \
    mutect2_pass.vcf.gz strelka2_pass.vcf.gz muse_pass.vcf.gz

Strict all-agree intersection sacrifices too much recall; union admits too many false positives; majority voting (e.g. 2 of 3) balances the two. Normalize every caller's VCF to the same representation first (bcftools norm -f ref.fa -m-) or the intersection undercounts because an indel left-aligned differently in two callers will not match. Consensus is a precision tool, not a substitute for orthogonal validation on the assay.

Somatic SV, CNV, and genomic biomarkers

A complete somatic profile is more than SNVs/indels - hand each off to its component skill:

• Structural variants: run Manta in tumor-normal (somatic) mode; it emits somaticSV.vcf.gz. For complex rearrangements/fusions use GRIDSS -> GRIPSS -> LINX. See variant-calling/structural-variant-calling.
• Copy number + purity/ploidy: CNVkit (targeted/exome), or PURPLE for allele-specific CN with purity/ploidy fit. Purity/ploidy is a required input for correct VAF-to-cancer-cell-fraction. See copy-number/cnvkit-analysis.
• Genomic biomarkers (brief): Tumor Mutational Burden (TMB) = eligible somatic mutations per Mb of covered target (filter out germline and low-VAF artifacts first - inflated TMB is usually residual germline in tumor-only). Microsatellite instability (MSI) is called from indel patterns at microsatellite loci (e.g. MSIsensor). Mutational signatures (SBS/ID/CNV, COSMIC catalogue) attribute the mutation spectrum to processes (APOBEC, UV, MMR-deficiency, platinum) and cross-check artifacts - a dominant C>A/G>T signature can be residual oxoG, not biology. Verify current tool choices and thresholds against the latest docs.

Annotation (normalize FIRST)

bcftools norm -f reference.fa -m- somatic_final.vcf.gz -Oz -o somatic_norm.vcf.gz  # left-align + split multiallelics

gatk Funcotator -R reference.fa -V somatic_norm.vcf.gz -O annotated.vcf.gz \
    --output-file-format VCF --data-sources-path funcotator_dataSources.v1.7 --ref-version hg38

vep -i somatic_norm.vcf.gz -o annotated_vep.vcf --vcf --cache --offline \
    --assembly GRCh38 --everything \
    --custom cosmic.vcf.gz,COSMIC,vcf,exact,0,CNT --fork 4

Normalize BEFORE annotating (annotate-then-normalize is an order error): un-normalized records attach annotations to a non-canonical representation and fail to match COSMIC/gnomAD. Full annotation mechanics (transcript choice, MANE, HGVS 3'-shift) live in variant-calling/variant-annotation.

Interpretation: somatic tiers, NOT germline ACMG

This is the critical decision of the whole pipeline and the most common category error. Route the annotated somatic VCF to variant-calling/clinical-interpretation, which applies TWO orthogonal cancer frameworks:

AMP/ASCO/CAP four-tier clinical actionability (Li 2017 J Mol Diagn 19:4-23):

Tier is tumor-type-specific - the SAME variant can be Tier I in one cancer and Tier II/III in another (no germline-ACMG analog).

Oncogenicity (Horak 2022 Genet Med 24:986): a SEPARATE points-based ClinGen/CGC/VICC axis (Oncogenic / Likely Oncogenic / VUS / Likely Benign / Benign) from hotspot recurrence, functional data, and tumor-type frequency. Oncogenicity (is it a driver) and actionability (is there a drug) are complementary: an oncogenic driver may still be Tier III if no therapy exists.

• Driver vs passenger: a tumor carries thousands of somatic mutations; only a few drive it. Hotspot recurrence (COSMIC, Tate 2019), presence in known oncogenes/tumor suppressors, functional evidence, and clonality (clonal drivers vs subclonal passengers) distinguish them.
• Knowledgebase evidence levels: OncoKB therapeutic levels 1-4 + R1/R2 (Chakravarty 2017); CIViC evidence items graded A (validated) to E (inferential), read the item not just the letter (Griffith 2017).
• Tumor-only germline leak: in tumor-only assays a high-VAF variant may be germline - reporting it as somatic (or applying a somatic tier to a germline pathogenic finding requiring genetic counseling) is a dual danger. Disclose and filter explicitly.

Quality metrics

bcftools query -f '%FILTER\n' filtered.vcf.gz | sort | uniq -c   # counts by filter status

# Substitution spectrum: excess C>A/G>T flags residual oxoG; excess C>T/G>A flags FFPE deamination
bcftools query -f '%REF>%ALT\n' somatic_final.vcf.gz | sort | uniq -c

# VAF distribution (a spike near 0.5/1.0 in tumor-only suggests residual germline).
# -s takes the read-group SM name, NOT the filename -- read it from the BAM header, as Step 2 does.
TUMOR_SM=$(samtools view -H tumor.bam | awk '/^@RG/{for(i=1;i<=NF;i++) if($i ~ /^SM:/){sub(/^SM:/,"",$i); print $i; exit}}')
# -s restricts to the tumor sample: a bare [%AF] iterates BOTH samples and concatenates
# them with no separator (0.25 + 0.01 -> "0.250.01"), which awk then silently truncates to 0.25.
bcftools query -s "$TUMOR_SM" -f '[%AF]\n' somatic_final.vcf.gz | awk '{print int($1*100)/100}' | sort -n | uniq -c

Do NOT judge somatic SNVs by a fixed germline-like Ti/Tv (~2-3); the somatic spectrum is signature-dependent, and a collapse toward transversion excess signals artifact contamination, not a target value.

Common Errors

Related Skills

• variant-calling/gatk-variant-calling - Mutect2 mechanism and germline HaplotypeCaller context
• variant-calling/filtering-best-practices - FilterMutectCalls internals, normalization, hard filters
• variant-calling/variant-annotation - VEP/Funcotator/SnpEff, transcript choice, HGVS, COSMIC
• variant-calling/clinical-interpretation - AMP/ASCO/CAP tiers and oncogenicity (somatic interpretation)
• variant-calling/structural-variant-calling - Somatic SV detection (Manta somatic mode, GRIDSS/LINX)
• copy-number/cnvkit-analysis - Somatic CNV, purity/ploidy for VAF-to-cancer-cell-fraction
• read-alignment/bwa-alignment - Upstream alignment/dedup/BQSR of tumor and normal BAMs

References

• Li MM, Datto M, Duncavage EJ, et al. Standards and guidelines for the interpretation and reporting of sequence variants in cancer: a joint consensus recommendation of AMP, ASCO, and CAP. Journal of Molecular Diagnostics. 2017;19(1):4-23. doi:10.1016/j.jmoldx.2016.10.002 (four-tier actionability).
• Horak P, Griffith M, Danos AM, et al. Standards for the classification of pathogenicity of somatic variants in cancer (oncogenicity): joint recommendations of ClinGen, CGC, and VICC. Genetics in Medicine. 2022;24(5):986-998. doi:10.1016/j.gim.2022.01.001.
• Benjamin D, Sato T, Cibulskis K, Getz G, Stewart C, Lichtenstein L. Calling Somatic SNVs and Indels with Mutect2. bioRxiv 861054 (2019). doi:10.1101/861054 (PREPRINT - the Mutect2 somatic workflow reference; never formally journal-published).
• Alioto TS, Buchhalter I, Derdak S, et al. A comprehensive assessment of somatic mutation detection in cancer using whole-genome sequencing. Nature Communications. 2015;6:10001. doi:10.1038/ncomms10001 (ICGC-TCGA DREAM; somatic reproducibility).
• Kim S, Scheffler K, Halpern AL, et al. Strelka2: fast and accurate calling of germline and somatic variants. Nature Methods. 2018;15(8):591-594. doi:10.1038/s41592-018-0051-x.
• Chen X, Schulz-Trieglaff O, Shaw R, et al. Manta: rapid detection of structural variants and indels for germline and cancer sequencing applications. Bioinformatics. 2016;32(8):1220-1222. doi:10.1093/bioinformatics/btv710.
• Karczewski KJ, Francioli LC, Tiao G, et al. The mutational constraint spectrum quantified from variation in 141,456 humans. Nature. 2020;581(7809):434-443. doi:10.1038/s41586-020-2308-7 (gnomAD; germline-resource / AF prior).
• Chakravarty D, Gao J, Phillips SM, et al. OncoKB: a precision oncology knowledge base. JCO Precision Oncology. 2017;2017:PO.17.00011. doi:10.1200/PO.17.00011 (therapeutic levels 1-4, R1/R2).
• Griffith M, Spies NC, Krysiak K, et al. CIViC is a community knowledgebase for expert crowdsourcing the clinical interpretation of variants in cancer. Nature Genetics. 2017;49:170-174. doi:10.1038/ng.3774 (evidence levels A-E).
• Tate JG, Bamford S, Jubb HC, et al. COSMIC: the Catalogue Of Somatic Mutations In Cancer. Nucleic Acids Research. 2019;47(D1):D941-D947. doi:10.1093/nar/gky1015 (hotspot recurrence, signatures).