Gx10 Cluster

GX10 Cluster — 3-Node DGX Spark Networking

When to Use

• Configuring networking between DGX Spark units
• Debugging ConnectX-7 QSFP connectivity
• Setting up NCCL multi-node cluster
• Troubleshooting link-local routing on CX7 multi-host mode

Cluster Inventory

SSH: user a, password-based auth via expect (no sshpass available).

Hardware

• SoC: NVIDIA GB10 Grace Blackwell Superchip
• CPU: 20-core Grace ARM64 (aarch64)
• GPU: Blackwell, 1 PFLOP AI
• Memory: 128GB unified LPDDR5x
• Storage: 4TB NVMe (~915GB usable)
• OS: Ubuntu 24.04, DGX Spark Version 7.4.0, kernel 6.17.0-1008-nvidia
• NIC: 2× ConnectX-7 (MT2910) per node, QSFP ports

ConnectX-7 Multi-Host Architecture

Each physical QSFP port exposes two logical interfaces (f0, f1) due to GB10's PCIe x4 limitation. Two x4 PCIe links aggregate to achieve 200 Gbps per port.

Physical QSFP Port 1 → enp1s0f0np0 (PCIe domain 0000, func 0)
                      → enp1s0f1np1 (PCIe domain 0000, func 1)
Physical QSFP Port 2 → enP2p1s0f0np0 (PCIe domain 0002, func 0)
                      → enP2p1s0f1np1 (PCIe domain 0002, func 1)

With approved QSFP112 cables, both f0 and f1 come up → 200 Gbps aggregate. With QSFP28/QSFP56 cables, only one function comes up → 100-200 Gbps single-lane.

Cable Inventory

NVIDIA-Approved Cables (recommended)

Warning: NVIDIA states only approved cables are supported. Others "may have active components that interfere with DGX's power and thermal envelope." Non-approved cables work at reduced speed but only one CX7 lane activates.

Physical Topology

gx10-9641 (top)    ──── HPE 200G AOC ────── gx10-94e2 (bottom)
                                                  │
gx10-4a97 (middle) ── Amphenol 100G DAC ──────────┘
                   │
gx10-9641 (top)    ── 10Gtek 100G DAC ── gx10-4a97 (middle)

94e2 is the hub node (connected to both others). 9641↔4a97 direct link via 10Gtek cable.

Networking Configuration

Netplan (/etc/netplan/40-cx7.yaml)

Apply on all nodes:

network:
  version: 2
  ethernets:
    enp1s0f0np0:
      link-local: [ ipv4 ]
    enp1s0f1np1:
      link-local: [ ipv4 ]
    enP2p1s0f0np0:
      link-local: [ ipv4 ]
    enP2p1s0f1np1:
      link-local: [ ipv4 ]

sudo wget -O /etc/netplan/40-cx7.yaml \
  https://github.com/NVIDIA/dgx-spark-playbooks/raw/main/nvidia/connect-two-sparks/assets/cx7-netplan.yaml
# Or write the extended version above for 3-node (includes Port 2)
sudo chmod 600 /etc/netplan/40-cx7.yaml
sudo netplan apply

NetworkManager Connections

If NM overrides netplan with static IPs, fix per-interface:

sudo nmcli con mod <iface> ipv4.method link-local ipv4.addresses ""
sudo nmcli con up <iface>

If NM connections don't exist for Port 2:

sudo nmcli con add type ethernet con-name enP2p1s0f0np0 ifname enP2p1s0f0np0 ipv4.method link-local
sudo nmcli con add type ethernet con-name enP2p1s0f1np1 ifname enP2p1s0f1np1 ipv4.method link-local
sudo nmcli con up enP2p1s0f0np0
sudo nmcli con up enP2p1s0f1np1

Critical: ARP and Routing Fixes for Multi-Host CX7

With non-approved cables, only one function (f0 or f1) activates per port. Since all interfaces share the 169.254.0.0/16 subnet, Linux sends replies out the wrong interface. Both fixes are required:

1. ARP Filter (all nodes)

sudo sysctl -w net.ipv4.conf.all.arp_filter=1
sudo sysctl -w net.ipv4.conf.all.arp_announce=2

Persist in /etc/sysctl.d/99-cx7.conf:

net.ipv4.conf.all.arp_filter=1
net.ipv4.conf.all.arp_announce=2

2. Policy-Based Routing (hub node with multiple connections)

For each CX7 interface with a link-local IP, add a source-based routing rule:

# Template: replace IP, IFACE, TABLE_NUM for each interface
sudo ip rule add from <LINK_LOCAL_IP> table <TABLE_NUM>
sudo ip route add 169.254.0.0/16 dev <IFACE> src <LINK_LOCAL_IP> table <TABLE_NUM>

Example for 94e2 (hub):

sudo ip rule add from 169.254.51.114 table 103
sudo ip route add 169.254.0.0/16 dev enp1s0f1np1 src 169.254.51.114 table 103
sudo ip rule add from 169.254.152.140 table 107
sudo ip route add 169.254.0.0/16 dev enP2p1s0f1np1 src 169.254.152.140 table 107
sudo ip rule add from 169.254.248.108 table 102
sudo ip route add 169.254.0.0/16 dev enp1s0f0np0 src 169.254.248.108 table 102
sudo ip rule add from 169.254.212.18 table 106
sudo ip route add 169.254.0.0/16 dev enP2p1s0f0np0 src 169.254.212.18 table 106

Note: Link-local IPs change on reboot. Persisted via cx7-policy-routing.service (see below).

Persistence Across Reboots

All settings now persist via:

Policy Routing Service

/usr/local/bin/cx7-policy-routing.sh — runs at boot, reads current link-local IPs, creates per-interface routing tables:

#!/bin/bash
sleep 10  # wait for link-local IPs
TABLE=100
for IFACE in enp1s0f0np0 enp1s0f1np1 enP2p1s0f0np0 enP2p1s0f1np1; do
  IP=$(ip -4 addr show dev "$IFACE" 2>/dev/null | grep -oP '169\.254\.\d+\.\d+' | head -1)
  if [ -n "$IP" ]; then
    TABLE=$((TABLE + 1))
    ip rule del from "$IP" table "$TABLE" 2>/dev/null
    ip rule add from "$IP" table "$TABLE"
    ip route replace 169.254.0.0/16 dev "$IFACE" src "$IP" table "$TABLE"
  fi
done

Enabled via: sudo systemctl enable cx7-policy-routing.service

Broken Netplan Files

DGX Spark generates 90-NM-*.yaml files via NetworkManager that can contain invalid YAML (aliases, control characters). If netplan apply fails:

# Identify the broken file from the error message, then:
sudo mv /etc/netplan/90-NM-<uuid>.yaml /etc/netplan/90-NM-<uuid>.yaml.bak
sudo netplan apply

Diagnostics

# Check CX7 detection
lspci | grep -i mellanox

# Check link status
ibdev2netdev

# Check interface IPs
ip -br addr show | grep -E 'enp1s0|enP2p1'

# Check link speed
ethtool enp1s0f0np0 | grep -i speed

# Check firmware
cat /sys/class/infiniband/*/fw_ver

# Check ARP neighbors
ip neigh show dev enp1s0f1np1

# Check routing
ip route show | grep 169.254
ip rule show

NCCL + RoCE Configuration

Software Stack

All nodes have: CUDA 13.0, Driver 580.142, NCCL 2.28.9 (built from source with Blackwell sm_121).

Build NCCL from Source (all nodes)

sudo apt-get install -y libopenmpi-dev
git clone -b v2.28.9-1 https://github.com/NVIDIA/nccl.git ~/nccl/
cd ~/nccl/
make -j$(nproc) src.build NVCC_GENCODE="-gencode=arch=compute_121,code=sm_121"

Build NCCL Tests (all nodes)

export CUDA_HOME=/usr/local/cuda
export MPI_HOME=/usr/lib/aarch64-linux-gnu/openmpi
export NCCL_HOME=$HOME/nccl/build
export LD_LIBRARY_PATH=$NCCL_HOME/lib:$CUDA_HOME/lib64:$MPI_HOME/lib:$LD_LIBRARY_PATH

git clone https://github.com/NVIDIA/nccl-tests.git ~/nccl-tests/
cd ~/nccl-tests/
make -j$(nproc) MPI=1

SSH Keys

Passwordless SSH is required for MPI. Each node has ~/.ssh/id_ed25519 and a pre-existing ~/.ssh/id_ed25519_shared (referenced in ~/.ssh/config). Both pubkeys must be in ~/.ssh/authorized_keys on all nodes. The shared key was the one that actually needed distributing.

RoCE (RDMA over Converged Ethernet) — 8x faster than TCP

Critical settings that made RoCE work:

1. MTU 9000 on CX7 interfaces (default 1500 gives only 1KB RDMA MTU):

   sudo ip link set enp1s0f0np0 mtu 9000
   

2. NCCL environment variables:

   export NCCL_SOCKET_IFNAME=enp1s0f0np0    # Bootstrap socket on CX7
   export NCCL_IB_HCA=rocep1s0f0             # Restrict to correct RDMA device
   export NCCL_IB_GID_INDEX=3                # RoCEv2 with IPv4-mapped GID
   export DISPLAY=                            # Suppress X11 auth errors
   

3. MPI config — separate control plane (WiFi) from data plane (CX7):

   --mca btl_tcp_if_include wlP9s9           # MPI control over WiFi
   --mca plm_rsh_agent "ssh -o StrictHostKeyChecking=no"
   

Running NCCL Tests

2-node test (94e2 ↔ 9641, 200G link)

export CUDA_HOME=/usr/local/cuda
export MPI_HOME=/usr/lib/aarch64-linux-gnu/openmpi
export NCCL_HOME=$HOME/nccl/build
export LD_LIBRARY_PATH=$NCCL_HOME/lib:$CUDA_HOME/lib64:$MPI_HOME/lib:$LD_LIBRARY_PATH
export DISPLAY=

mpirun -np 2 -H gx10-94e2:1,gx10-9641:1 \
  --mca plm_rsh_agent "ssh -o StrictHostKeyChecking=no" \
  --mca btl_tcp_if_include wlP9s9 \
  -x LD_LIBRARY_PATH \
  -x NCCL_SOCKET_IFNAME=enp1s0f0np0 \
  -x NCCL_IB_HCA=rocep1s0f0 \
  -x NCCL_IB_GID_INDEX=3 \
  -x DISPLAY \
  $HOME/nccl-tests/build/all_gather_perf -b 8 -e 128M -f 2 -g 1

TCP fallback (if RoCE fails)

Add -x NCCL_IB_DISABLE=1 to the mpirun command. Expect ~2.2 GB/s instead of ~18 GB/s.

Benchmark Results

RoCE (NET/IB) — 8 channels, GID index 3, MTU 9000

Avg bus bandwidth: 2.59 GB/s (all sizes), peak: 18 GB/s / 9 GB/s bus

TCP fallback (NCCL_IB_DISABLE=1)

RoCE delivers ~8x improvement over TCP.

RoCE Diagnostics

# List RDMA devices
ibv_devices

# Check RDMA device details (port state, MTU, link layer)
ibv_devinfo -d rocep1s0f0

# Check GID table (need GID with RoCE v2 + IPv4-mapped address)
for i in 0 1 2 3; do
  echo -n "GID $i: "
  cat /sys/class/infiniband/rocep1s0f0/ports/1/gids/$i
  echo -n "  Type: "
  cat /sys/class/infiniband/rocep1s0f0/ports/1/gid_attrs/types/$i
done

# Verify active RDMA MTU (should be 4096 after setting interface MTU to 9000)
ibv_devinfo -d rocep1s0f0 | grep active_mtu

Why RoCE Failed Initially

1. Default MTU 1500 → RDMA active_mtu was only 1024 (too small for QP establishment)
2. NCCL tried all RDMA devices including ones connected to unreachable nodes → "unhandled system error"
3. No GID index specified → NCCL picked wrong GID (link-local IPv6 instead of IPv4-mapped)

Fix: restrict NCCL_IB_HCA to the correct device, set NCCL_IB_GID_INDEX=3, and set MTU 9000.

Theoretical vs Actual Bandwidth

With approved QSFP112 cables (both CX7 lanes active), expect ~400 Gbps / 50 GB/s theoretical.

Firmware Recovery (Bricked After Update)

1. Full power drain — unplug everything for 30+ minutes
2. Reconnect only power + direct display (try USB-C DP)
3. Hold ESC + press power to enter UEFI
4. Follow: https://docs.nvidia.com/dgx/dgx-spark-user-guide/system-recovery.html
5. If nothing works → NVIDIA support ticket

References

• Spark Stacking Guide: https://docs.nvidia.com/dgx/dgx-spark/spark-clustering.html
• Connect Two Sparks Playbook: https://build.nvidia.com/spark/connect-two-sparks
• NCCL Two Sparks: https://build.nvidia.com/spark/nccl
• Approved cables: https://marketplace.nvidia.com/en-us/enterprise/personal-ai-supercomputers/
• CX7 multi-host explanation: https://forums.developer.nvidia.com/t/connectx-7-nic-in-dgx-spark/350417
• ConnectX-7 NIC disappearing: https://forums.developer.nvidia.com/t/connectx-7-nics-no-longer-appear/363193