10x CLI Guide

10x-cli Daily Usage Guide

This skill helps users work with @przeprogramowani/10x-cli after it is already installed and authenticated. If the user has not installed or authenticated yet, hand off to the 10x-cli-setup skill instead.

Step 1: Detect the user's environment

Before giving any guidance, gather context silently — run these checks and remember the results. Do not print raw output to the user.

Operating system

echo "$OSTYPE" 2>/dev/null || echo "win32"

Use the result to tailor path separators, shell syntax, and clipboard commands throughout your answers:

Active AI tool

10x doctor --json 2>/dev/null | head -1

Also check which tool profile is configured:

cat ~/.config/10x-cli/config.json 2>/dev/null || cat "$APPDATA/10x-cli/config.json" 2>/dev/null || echo "{}"

If the config contains a "tool" key, that is the active profile. If not, the default is claude-code.

CLI version

10x --version

Step 2: Answer the user's question using the reference below

Use the environment context from Step 1 to personalize every answer. Always use the OS-appropriate shell syntax, paths, and commands. Never show macOS-specific commands to a Windows user or vice versa.

Command Reference

10x get <ref> — Fetch and apply lesson artifacts

The primary daily command. Fetches a lesson bundle from the API and writes skills, prompts, rules, and config templates to the project directory.

10x get m1l1              # Fetch module 1, lesson 1
10x get m2l3              # Fetch module 2, lesson 3
10x get m1l1 --dry-run    # Preview what would be written
10x get m1l1 --tool cursor  # Use a different AI tool profile
10x get m1l1 --lang pl    # Fetch Polish content

Filtering artifacts:

10x get m1l1 --type skills                     # Only skills
10x get m1l1 --type skills --name code-review  # One specific skill
10x get m1l1 --print --type skills --name code-review  # Print to stdout

Where artifacts land (depends on the active tool profile):

Re-applying a lesson overwrites skills and prompts if content changed, updates the rules sentinel block, but never overwrites config templates (they may contain user edits).

Switching lessons cleans up artifacts from the previous lesson that are not in the new one, keeps shared artifacts, and adds new ones.

10x list [module] — Browse available content

10x list       # Show all modules with lock state
10x list m1    # Show lessons in module 1

Locked modules show their unlock date. Use this to see what is available before fetching.

10x doctor — Diagnose problems

Runs 5 checks: Auth status, API connectivity, Config directory, CLI version, and tool directory presence.

10x doctor          # Human-readable output
10x doctor --json   # Machine-readable for scripting

Exit code 78 means at least one check failed.

10x auth — Session management

10x auth             # Start magic-link login
10x auth --status    # Check current session
10x auth --logout    # Clear credentials

Sessions refresh transparently — if a token is near expiry, the next command refreshes it automatically. You only need to re-auth manually if the session has fully expired.

10x bench — 10xBench model leaderboard

10x bench             # Top 10 AI models with color-coded score bars
10x bench --limit 5   # Just the top 5
10x bench --json      # Machine-readable envelope (also when piped)

Shows the live leaderboard from 10xbench.ai — AI models benchmarked on vibe-coding the Przeprogramowani.pl website. Each row has the average score, number of runs, cost per run where measured, and the agent harness used. No authentication needed — this works before 10x auth. Data updates when new benchmark results are published; superseded model versions are already filtered out upstream. If it reports the leaderboard as unavailable, the site may be mid-deploy — retry in a few minutes.

Switching Tools

To change your AI tool (e.g., from Claude Code to Cursor):

10x get m1l1 --tool cursor

The CLI will detect that artifacts from the old tool exist and offer two options:

1. Migrate (default) — move all artifacts to the new tool's directories, remove the sentinel block from the old rules file.
2. Delete — remove only 10x-managed artifacts from the old tool's directories. Your own files (e.g., .github/workflows/) are never touched.

The tool choice is saved in the config file (~/.config/10x-cli/config.json on macOS/Linux, %APPDATA%/10x-cli/config.json on Windows). Future get commands will use the new tool without needing --tool again.

Platform-Specific Tips

Windows

• Use PowerShell (not cmd.exe). The CLI outputs ANSI colors and Unicode symbols that render correctly in Windows Terminal + PowerShell but may garble in legacy cmd.
• npx works fine: npx @przeprogramowani/10x-cli get m1l1 — no global install needed. Node 20+ is the only prerequisite.
• Clipboard: Skills that copy to clipboard use clip.exe on Windows. If a skill outputs a clipboard command, it will fall back silently if clip.exe is unavailable.
• Config location: %APPDATA%\10x-cli\config.json and %APPDATA%\10x-cli\auth.json. The CLI creates these automatically.
• Path separators: The CLI uses Node's path.join() internally, so forward slashes in command output (like .claude/skills/code-review/SKILL.md) work fine on Windows — no need to convert them.

Linux

• Clipboard: Skills use xclip -selection clipboard or xsel --clipboard. If neither is installed, clipboard operations fail silently. Install with sudo apt install xclip (Debian/Ubuntu) or sudo dnf install xclip (Fedora).
• Config location: ~/.config/10x-cli/ (respects $XDG_CONFIG_HOME if set).

macOS

• Clipboard: Skills use pbcopy — works out of the box.
• Config location: ~/.config/10x-cli/.

Troubleshooting

When the user reports a problem, follow this sequence:

1. Run doctor first

10x doctor

This catches the most common issues. Read the output and address each failing check.

2. Common problems and fixes

3. Verbose mode for deeper debugging

10x get m1l1 --verbose
10x doctor --verbose

This prints request/response diagnostics to stderr, useful for diagnosing API or network issues.

4. Nuclear reset

If config is corrupted:

On macOS/Linux:

rm -rf ~/.config/10x-cli
10x auth

On Windows (PowerShell):

Remove-Item -Recurse -Force "$env:APPDATA\10x-cli"
10x auth

This clears auth and tool preference. The next 10x auth recreates everything.

Important Principles

• Answer with the user's OS and tool in mind. Never show pbcopy to a Windows user. Never show %APPDATA% to a macOS user.
• Run 10x doctor before speculating. It catches 80% of issues.
• Don't guess command syntax from memory. If unsure about a flag or behavior, fetch the latest README: https://raw.githubusercontent.com/przeprogramowani/10x-cli/refs/heads/master/README.md
• Distinguish tool profile issues from CLI issues. If artifacts land in the wrong directory, it is a tool profile question. If the command itself fails, it is a CLI/auth/network question.