Avatar Ambient Sfx

Avatar Ambient SFX (spatial sound design for reels)

Layer a spatial ambient sound bed over a finished reel so each "world"/location (garden, water, fire, plaza…) gets its own positioned atmosphere, and deliver it as final-espacial.mp4. The narration always stays on top; final.mp4 is never touched.

This skill is a thin orchestration on top of audio-theater (which provides the SFX generator and the spatial mixer) plus one overlay script in this skill.

When to use

The reel is already finished (final.mp4 with narration + music + captions + fade), and the user wants to "ambientarlo más" / add ambient, positional, or spatial sound that follows the different worlds in the video. Best when the reel is a journey across distinct locations.

Prerequisites

• The finished reel folder must contain: final.mp4, narration.mp3 (narration-only track, the sidechain key), and ideally narration.align.json (for the fade timing).
• audio-theater scripts available at ~/.cursor/skills/audio-theater/scripts and an ElevenLabs key set (realistic foley). Verify: python3 ~/.cursor/skills/audio-theater/scripts/setup_key.py --show.
• ffmpeg/ffprobe on PATH.

Workflow

SFX=~/.cursor/skills/audio-theater/scripts
THIS=<this-skill>/scripts          # overlay_ambient.py lives here
REEL=antiguo/reels/NNN_slug
AMB=$REEL/ambient

1. Map the worlds to the timeline. Read reel_manifest.json (scene start/end) and group scenes by location into time windows, e.g. garden 0–11.9s, water 11.9–32.3s, fire 32.3–end. Note where the visible source sits in frame (left/right) — pan follows it.

2. Author $AMB/cues.json (you write it) + an empty $AMB/lines.json:

   {"duration": <reel_seconds>, "lines": []}
   

   One ambient bed per world (with a 0.5s pre-lap/overlap into the next for a soft cross), plus oneshot accents (a couple of bird chirps, gulls flying across, etc.). Give every cue a spatial block. Describe CONCRETE, discrete sounds (waves, birds, a clock tick, a candle pop, a page turn) — NOT abstract textures ("room tone", "airy shimmer", "hush", "starlight"), which ElevenLabs renders as broadband NOISE (see the "noise wash" lesson below). For intimate indoor scenes, prefer a few diegetic one-shots in the speech gaps over a continuous bed. See REFERENCE.md for the cue schema, the Cap.6 worked example, and the positioning/level rules. (cues.json is an audio-theater file — full schema in `/.cursor/skills/audio-theater/SKILL.md`.)

3. Generate the SFX (ElevenLabs, realistic foley):

   python3 $SFX/generate_sfx.py --cues $AMB/cues.json --out $AMB --backend elevenlabs
   

   Files land in $AMB/sfx/; durations are written back into cues.json.

4. Spatial mix → ambient_spatial.mp3 (no dialogue/music in this project, so no ducking here — ducking under narration happens in the overlay step):

   python3 $SFX/mix_spatial.py --out $AMB --output-name ambient_spatial.mp3 --no-duck
   # intimate / quiet indoor beds: add --target-i -28 (default -16 over-amplifies near-noise beds)
   

   ⚠ mix_spatial loudnorms the whole bed to --target-i (default -16 LUFS, sized for loud outdoor foley). For quiet intimate ambiences pass --target-i -28..-30 so it doesn't boost near-silent beds +30 dB and surface their hiss (see the "noise wash" lesson below).

5. Overlay onto the reel, ducked under narration → final-espacial.mp4:

   python3 $THIS/overlay_ambient.py --reel-dir $REEL
   

   Auto-discovers final.mp4, ambient/ambient_spatial.mp3, narration.mp3, narration.align.json. Copies the video, mixes the ambient ducked under the narration (sidechaincompress), loudnorm's to MATCH final.mp4's own loudness (so the only audible change is the bed — our masters sit ~-21..-24 LUFS, not -16), and fades the audio out to match the fade-to-black. Tune presence with --ambient-gain-db (default -4; lower = subtler); force a fixed target with --loudnorm I=-16:TP=-1.5:LRA=11 only if you really want it.

   • Bed cleanup is ON by default (highpass 35Hz + lowpass 12kHz + afftdn nr=10): tames the ElevenLabs broadband hiss that quiet/abstract beds carry (these ambiences have nothing above ~12kHz). Disable for rich loud outdoor foley with --no-clean; tune with --clean-lowpass / --clean-nr. The overlay also prints a [bed-QA] warning if the bed looks like a broadband-noise wash (>8kHz within ~3dB of full) — heed it and re-author the content.

6. QA (objective, not just by ear): confirm the panning and that narration still dominates.

   # Per-channel RMS in a window (left vs right) — pan should match the frame:
   ffmpeg -loglevel info -i $AMB/ambient_spatial.mp3 -af "atrim=START:END,astats" -f null - 2>&1 | grep -iE "Channel|RMS level"
   # Integrated loudness should barely move vs final.mp4 (ambient is subordinate):
   ffmpeg -i $REEL/final-espacial.mp4 -af loudnorm=print_format=summary -f null - 2>&1 | grep -i "Input Integrated"
   

   ⚠ astats needs -loglevel info (it's silenced by -loglevel error).

Positioning rules (pan follows the frame)

• pan ∈ [-1,+1] (L..R, 0=center), distance ∈ [0,1] (0=close..1=far).
• Position SFX where the source is on screen. If the fire is framed on the left, crackle pans left; put crickets/wind right. Water/waves usually center & close.
• Ambient beds stay stereo & fixed — they only honor a gentle {pan} balance and {distance}. One-shots move — give a flying gull a path (e.g. L→R) so it crosses the stage.
• Use soft overlaps (~0.5s) between adjacent world beds with fade_in/fade_out so worlds cross-fade instead of cutting.

Level & naturalness lessons (hard-won)

• ⚠ THE "NOISE WASH" TRAP — concrete foley vs abstract textures (Cap.8/9/10 regression). Caps 6/7 (008/009) sounded great because their worlds are loud, concrete OUTDOOR foley (sea waves, birds, fire crackle, gulls) — structured sounds ElevenLabs renders cleanly. Caps 8/9/10 (010/011/012) moved to intimate/abstract INDOOR ambiences ("candlelit room tone", "airy shimmer", "hush", "glassy starlight tone") → ElevenLabs renders those as very quiet, low-level BROADBAND NOISE (−41..−61 dB, no structure). The pipeline then amplifies the hiss: mix_spatial loudnorms the bed toward −16 LUFS (built for loud foley) → +25..+45 dB on near-noise beds, and any hot per-cue gain_db (e.g. +10) compounds it. Result = a uniform broadband hiss wash = the "ruido raro / molesto". Verified by spectrogram: 008 shows distinct events + a dark high-freq floor; 012 is a solid red wash from DC to the 16.5kHz MP3 brick-wall. Post-processing (denoise/lowpass/lower level) only makes it quieter, not pleasant — the content IS noise. Fixes, in order of importance:
  1. Author CONCRETE, discrete diegetic sounds, not abstract textures. A candlelit study reads as a few clock ticks, occasional candle/wax pops, a page turn, a wooden desk creak, a single distant wind gust — placed as oneshots in the speech gaps. Avoid continuous "room tone / shimmer / hush / starlight" beds (those = noise). If a world has no honest continuous sound, use only one-shots and no bed.
  2. QA every bed's spectrogram (ffmpeg -i sfx/X.mp3 -lavfi showspectrumpic=s=900x320:legend=1 X.png): it must show structured events + a dark floor above the content. A uniform fill up to 16kHz = reject/regenerate. The overlay's [bed-QA] line is a cheap heuristic for the same thing.
  3. Don't over-amplify. For intimate beds, mix with a lower target (mix_spatial.py --target-i -28 .. -30) so quiet beds aren't boosted +30 dB, and keep --ambient-gain-db low (−6..−9). The overlay's default lowpass 12kHz + light denoise removes the brick-wall hiss; it is a safety net, not a substitute for concrete content.
• Narration ALWAYS wins. Key the duck off narration.mp3 (not the full mix) so the bed dips only under the voice and stays present in the gaps. After overlay, the integrated LUFS should move only ~+0.2–1 LU vs final.mp4.
• Match the source loudness — don't force -16. The series masters sit ~-21..-24 LUFS (Cap.7 final.mp4 = -24.4). The overlay used to hard-code loudnorm I=-16, which boosted the WHOLE mix (voice + music + ambient) ~+8 dB and made final-espacial sound much louder than final.mp4 — a confounded A/B and a false "loudness jumped" QA reading. Fix (now the default): the overlay measures final.mp4's integrated loudness and matches it, so the bed is the only change (Cap.7: -24.4 → -23.9..-24.3 LUFS, +0.5 LU). TikTok normalizes playback anyway.
• Balance gain_db per world by measuring RMS, not by guessing. mix_spatial.py runs a global loudnorm, so one hot source (e.g. fire crackle peaking at -1.7 dBFS) will crush the rest. Measure each world's RMS with astats and raise quiet worlds until each is audible.
• Validate the SFX source. ElevenLabs sometimes renders a bed too distant/quiet — the first garden-birds render came back at RMS -75 dB (inaudible). Regenerate with a closer/denser prompt and/or add 1–2 oneshot accents.
• NEVER prompt beds as "almost silent" / "very faint". ElevenLabs takes it literally and renders the bed at -73..-83 dB (dead). For an intimate room (candlelit study), describe present, up-close detail ("up-close candle flames fluttering with a faint wax crackle, a warm room tone, a distant tiny clock tick") — let gain_db/distance set the level, the prompt sets the content. Cap.9: "almost silent" beds → inaudible; rewritten present → -38..-58 dB.
• Continuous narration crushes the bed (the "I hear no ambient" trap). If the reel is wall-to-wall voice (check narration.align.json for gaps), the overlay's sidechain duck suppresses the WHOLE layer almost the entire time. Two fixes, used together: (1) soften the duck so the bed breathes under the voice — --duck "threshold=0.06:ratio=2:attack=15:release=400" (the -4/default ratio=3 is too aggressive for continuous VO); (2) place diegetic one-shot accents IN the speech gaps — Cap.9 had a single 0.64s gap (18.84–19.48s), so the coin-clink (the action beat's sound) was moved to start:18.95 and rang out +8 dB in-clear instead of being masked at full speech.
• QA the bed by A/B window, not just integrated LUFS. Measure the same windows in final.mp4 vs final-espacial.mp4 (-ss W -t D -af volumedetect): a real gap should jump several dB; speech windows should barely move (voice still wins). Integrated LUFS hides an inaudible bed.
• Transients lie. A crackle has low RMS despite high peaks — don't chase its RMS; set it by pan + level by ear.
• Naturalness > density. A dense/continuous bed sounds fake (e.g. nonstop bird trills). Prefer a spaced/varied description ("a few different small birds… with natural gentle pauses"), low prompt_influence (0.3), and a generous fade_in (2.5s) so it doesn't slam in.
• Don't overwrite final.mp4 — always deliver final-espacial.mp4 (the spatial layer is an optional alternate, not the canonical master).

Output

• $AMB/cues.json, $AMB/sfx/*.mp3, $AMB/ambient_spatial.mp3 (the spatial layer).
• $REEL/final-espacial.mp4 (video copied from final.mp4, audio = original + ambient bed).

Additional resources

• Cue schema, the full Cap.6 worked example, and detailed positioning/level recipes: REFERENCE.md
• SFX/mix internals (cues.json fields, mix_spatial flags): ~/.cursor/skills/audio-theater/SKILL.md