Voice Isolate

Voice Isolate

Given a video, produce clean voice samples of the narrator: the recurring percussive SFX (a short broadband "taka"/"tk" that bleeds over the voice) is detected and the word it lands on is dropped, so the remaining phrases are clean. The goal is good-quality voice samples (for cloning/TTS), not preserving every word — contaminated words are discarded on purpose.

Pipeline

1. ffmpeg extracts the audio from the video.
2. Demucs (htdemucs) splits it into the voice stem and the accompaniment stem (everything that is not voice: music + SFX).
3. faster-whisper transcribes on the clean voice stem → segments + per-word timecodes (more accurate than transcribing the original mix).
4. Taka detection (auto): the SFX is a short broadband transient whose energy spikes in the high band (>5 kHz), while the voice body lives below ~4 kHz. In the accompaniment stem (voice already removed) those transients stand out. The HF energy envelope is peak-picked with an auto-relative threshold, so only prominent taka are flagged — not the near-silent floor.
5. Word drop: each detected taka is expanded to the whole word(s) it overlaps and those words are removed from the speech.
6. The remaining clean phrases (≥ --min-sample-len) are exported as individual samples/sample_NNN.wav clips and as one concatenated voice_concat.

Requirements

• ffmpeg on PATH.
• Python deps: pip3 install -r requirements.txt (no librosa/torch beyond Demucs; detection uses scipy.signal).
• torch and torchaudio MUST match versions (e.g. torch==2.5.1 + torchaudio==2.5.1). A mismatch makes torchaudio fail to load and Demucs cannot run. Fix with pip3 install "torchaudio==$(python3 -c 'import torch;print(torch.__version__.split("+")[0])')".
• First Demucs run downloads model weights (~80MB), cached afterwards.

Quick start

Everything is automatic — taka removal and sample export are on by default:

python3 scripts/extract_voice.py <video> --mp3

• Output goes to <video>_voice/ next to the video (override with -o <dir>).
• The deliverable is the samples/ folder (clean clips) plus voice_concat.mp3 (all clean phrases concatenated).
• accompaniment.wav is kept by default so re-runs can reuse the stems (Tuning).
• Add --language es (or en, …) to skip auto-detection.

Report the final stats printed by the script (taka detected, seconds removed, number of clean samples) and the path to samples/ and voice_concat.mp3.

Outputs (in <video>_voice/)

Auto-relative threshold (default, no per-video tuning)

The taka is sparse and sits over a near-silent high-frequency floor, so a fixed threshold — or a MAD-based one — collapses and over-triggers. Instead the threshold uses a robust upper spread of the accompaniment's >5 kHz envelope:

threshold = max(--sfx-min-abs, median + k · (p95 − median))

Only prominent peaks above it (with a minimum spacing) are taken as taka. The script prints the computed threshold and count each run (Umbral auto (taka >5000Hz): median … + k*(p95-median) … = …) and stores it in voice.json (sfx_detection). This is fully per-video and needs no tuning.

Tuning (fast, no re-separation)

Re-running Demucs is the slow part. After a first run (accompaniment is saved by default), use --reuse-stems to re-cut in ~5s from the saved vocals_full.wav + accompaniment.wav + voice.json:

# More taka removed → lower k; keep more voice → raise k:
python3 scripts/extract_voice.py <video> --reuse-stems --mp3 --sfx-k 3

Key knobs:

• --sfx-k (default 4.0): sensitivity. Lower = more taka removed (cleaner remainder, less voice kept); higher = fewer. k≈4 removes only the clear taka; drop to 3/2 if some are still audible, raise to 5 if too much is cut.
• --sfx-hf-hz (default 5000): the high band where the taka lives. Lower it if the SFX is more midrange; the voice body is below ~4 kHz.
• --sfx-min-distance (default 0.20): minimum spacing (s) between taka peaks.
• --sfx-half-width (default 0.06): half-window (s) around each peak before snapping to the word.
• --min-sample-len (default 0.4): drop clean chunks shorter than this (keeps only usable samples).
• --sfx-word-pad (default 0.04): extra margin when expanding a peak to a word.
• --no-snap-words: cut exactly the peak instead of the whole word (may leave a half-word; usually not wanted for samples).
• --no-samples: skip the individual-clip export (keep only the concat).
• --no-remove-sfx: disable taka detection entirely (raw Demucs voice).

Notes / limitations

• Demucs isolates all vocals, not a specific speaker. With multiple speakers, all voices stay in the stem (no diarization).
• The taka detector targets discrete transient SFX. A continuous music bed under the voice is not removed by dropping words (it overlaps every word); for a cleaner stem re-separate with the fine-tuned model --demucs-model htdemucs_ft (≈4× slower, CPU only — MPS is unsupported for it).
• --no-demucs skips separation and just trims the original audio by speech VAD (no taka removal).