Understanding memory usage
Qdrant operates with two types of memory:
Resident memory (aka RSSAnon) - memory used for internal data structures like the ID tracker, plus components that stay fully in RAM. On Qdrant 1.19 or newer this is controlled per-component with memory: pinned (e.g. quantized vectors, payload indexes); on 1.18 or older the equivalent is always_ram: true.
OS page cache - memory used for caching disk reads, which can be released when needed. Original vectors are normally stored in page cache, so the service won't crash if RAM is full, but performance may degrade. On Qdrant 1.19 or newer this corresponds to memory: cached (pre-warmed into page cache at startup) or memory: cold (lazy disk reads, not pre-warmed); on 1.18 or older it's controlled via the on_disk boolean on vectors, HNSW config, sparse vector index, and payload index. See Memory Tiers docs (available on 1.19+).
It is normal for the OS page cache to occupy all available RAM, but if resident memory is above 80% of total RAM, it is a sign of a problem.
Memory usage monitoring
- Qdrant exposes memory usage through the
/metrics endpoint. See Monitoring docs.
How much memory is needed for Qdrant?
Optimal memory usage depends on the use case.
For a detailed breakdown of memory usage at large scale, see Large scale memory usage example.
Payload indexes and HNSW graph also require memory, along with vectors themselves, so it's important to consider them in calculations.
Additionally, Qdrant requires some extra memory for optimizations. During optimization, optimized segments are fully loaded into RAM, so it is important to leave enough headroom.
The larger max_segment_size is, the more headroom is needed.
When to put HNSW index on disk
Putting frequently used components (such as HNSW index) on disk might cause significant performance degradation. On Qdrant 1.19 or newer this is set with memory: cold in hnsw_config; on 1.18 or older with hnsw_config.on_disk: true.
There are some scenarios, however, when it can be a good option:
- Deployments with low latency disks - local NVMe or similar.
- Multi-tenant deployments, where only a subset of tenants is frequently accessed, so that only a fraction of data & index is loaded in RAM at a time.
- For deployments with inline storage enabled.
How to minimize memory footprint
The main challenge is to put on disk those parts of data, which are rarely accessed.
Here are the main techniques to achieve that:
Use quantization to store only compressed vectors in RAM Quantization docs
Use float16 or int8 datatypes to reduce memory usage of vectors by 2x or 4x respectively, with some tradeoff in precision. On Qdrant 1.19 or newer, the turbo4 datatype (TurboQuant-based, 4 bits/dimension, dense vectors only) reduces memory by ~8x, and can be paired with 1-bit quantization for cheaper rescoring than pairing 1-bit quantization with full-precision vectors. Read more about vector datatypes in documentation
Leverage Matryoshka Representation Learning (MRL) to store only small vectors in RAM while keeping large vectors on disk. Examples of how to use MRL with Qdrant Cloud inference: MRL docs
For multi-tenant deployments with small tenants, vectors might be stored on disk because the same tenant's data is stored together Multitenancy docs
For deployments with fast local storage and relatively low requirements for search throughput, it may be possible to store all components of vector store on disk. Read more about the performance implications of on-disk storage in the article
For low RAM environments, consider async_scorer config, which enables support of io_uring for parallel disk access, which can significantly improve performance of on-disk storage. Read more about async_scorer in the article (only available on Linux with kernel 5.11+)
Consider storing Sparse Vectors and text payload on disk, as they are usually more disk-friendly than dense vectors.
Configure payload indexes to be stored on disk: memory: cold on Qdrant 1.19 or newer, on_disk: true on 1.18 or older docs
Configure sparse vectors to be stored on disk: memory: cold on the sparse vector index on Qdrant 1.19 or newer (defaults to pinned), on_disk: true on 1.18 or older docs
1---2name: qdrant-memory-usage-optimization3description: Diagnoses and reduces Qdrant memory usage. Use when someone reports 'memory too high', 'RAM keeps growing', 'node crashed', 'out of memory', 'memory leak', or asks 'why is memory usage so high?', 'how to reduce RAM?'. Also use when memory doesn't match calculations, quantization didn't help, or nodes crash during recovery.4---5
6# Understanding memory usage
7
8Qdrant operates with two types of memory:
9
10- Resident memory (aka RSSAnon) - memory used for internal data structures like the ID tracker, plus components that stay fully in RAM. On Qdrant 1.19 or newer this is controlled per-component with `memory: pinned` (e.g. quantized vectors, payload indexes); on 1.18 or older the equivalent is `always_ram: true`.
11
12- OS page cache - memory used for caching disk reads, which can be released when needed. Original vectors are normally stored in page cache, so the service won't crash if RAM is full, but performance may degrade. On Qdrant 1.19 or newer this corresponds to `memory: cached` (pre-warmed into page cache at startup) or `memory: cold` (lazy disk reads, not pre-warmed); on 1.18 or older it's controlled via the `on_disk` boolean on vectors, HNSW config, sparse vector index, and payload index. See [Memory Tiers docs](https://skills.qdrant.tech/md/documentation/ops-configuration/memory-tiers/) (available on 1.19+).
13
14It is normal for the OS page cache to occupy all available RAM, but if resident memory is above 80% of total RAM, it is a sign of a problem.
15
16## Memory usage monitoring
17
18- Qdrant exposes memory usage through the `/metrics` endpoint. See [Monitoring docs](https://skills.qdrant.tech/md/documentation/ops-monitoring/monitoring/).
19
20<!-- ToDo: Talk about memory usage of each components once API is available -->
21
22
23## How much memory is needed for Qdrant?
24
25Optimal memory usage depends on the use case.
26
27- For regular search scenarios, general guidelines are provided in the [Capacity planning docs](https://skills.qdrant.tech/md/documentation/capacity-planning/).
28
29For a detailed breakdown of memory usage at large scale, see [Large scale memory usage example](https://skills.qdrant.tech/md/documentation/tutorials-operations/large-scale-search/?s=memory-usage).
30
31Payload indexes and HNSW graph also require memory, along with vectors themselves, so it's important to consider them in calculations.
32
33Additionally, Qdrant requires some extra memory for optimizations. During optimization, optimized segments are fully loaded into RAM, so it is important to leave enough headroom.
34The larger `max_segment_size` is, the more headroom is needed.
35
36
37### When to put HNSW index on disk
38
39Putting frequently used components (such as HNSW index) on disk might cause significant performance degradation. On Qdrant 1.19 or newer this is set with `memory: cold` in `hnsw_config`; on 1.18 or older with `hnsw_config.on_disk: true`.
40There are some scenarios, however, when it can be a good option:
41
42- Deployments with low latency disks - local NVMe or similar.
43- Multi-tenant deployments, where only a subset of tenants is frequently accessed, so that only a fraction of data & index is loaded in RAM at a time.
44- For deployments with [inline storage](https://skills.qdrant.tech/md/documentation/ops-optimization/optimize/?s=inline-storage-in-hnsw-index) enabled.
45
46
47## How to minimize memory footprint
48
49The main challenge is to put on disk those parts of data, which are rarely accessed.
50Here are the main techniques to achieve that:
51
52- Use quantization to store only compressed vectors in RAM [Quantization docs](https://skills.qdrant.tech/md/documentation/manage-data/quantization/)
53
54- Use float16 or int8 datatypes to reduce memory usage of vectors by 2x or 4x respectively, with some tradeoff in precision. On Qdrant 1.19 or newer, the `turbo4` datatype (TurboQuant-based, 4 bits/dimension, dense vectors only) reduces memory by ~8x, and can be paired with 1-bit quantization for cheaper rescoring than pairing 1-bit quantization with full-precision vectors. Read more about vector datatypes in [documentation](https://skills.qdrant.tech/md/documentation/manage-data/vectors/?s=datatypes)
55
56- Leverage Matryoshka Representation Learning (MRL) to store only small vectors in RAM while keeping large vectors on disk. Examples of how to use MRL with Qdrant Cloud inference: [MRL docs](https://skills.qdrant.tech/md/documentation/inference/matryoshka-models/?s=reduce-vector-dimensionality-with-matryoshka-models)
57
58- For multi-tenant deployments with small tenants, vectors might be stored on disk because the same tenant's data is stored together [Multitenancy docs](https://skills.qdrant.tech/md/documentation/manage-data/multitenancy/?s=calibrate-performance)
59
60- For deployments with fast local storage and relatively low requirements for search throughput, it may be possible to store all components of vector store on disk. Read more about the performance implications of on-disk storage in [the article](https://skills.qdrant.tech/md/articles/memory-consumption/)
61
62- For low RAM environments, consider `async_scorer` config, which enables support of `io_uring` for parallel disk access, which can significantly improve performance of on-disk storage. Read more about `async_scorer` in [the article](https://skills.qdrant.tech/md/articles/io_uring/) (only available on Linux with kernel 5.11+)
63
64- Consider storing Sparse Vectors and text payload on disk, as they are usually more disk-friendly than dense vectors.
65- Configure payload indexes to be stored on disk: `memory: cold` on Qdrant 1.19 or newer, `on_disk: true` on 1.18 or older [docs](https://skills.qdrant.tech/md/documentation/manage-data/indexing/?s=on-disk-payload-index)
66- Configure sparse vectors to be stored on disk: `memory: cold` on the sparse vector index on Qdrant 1.19 or newer (defaults to `pinned`), `on_disk: true` on 1.18 or older [docs](https://skills.qdrant.tech/md/documentation/manage-data/indexing/?s=sparse-vector-index)
67
qdrant