Kubeadm Init

kubeadm init - Control Plane Initialization

Overview

kubeadm init bootstraps the Kubernetes control plane through 14 automated phases.

Core principle: Understand each phase before troubleshooting. Certificate, network, and kubelet issues are traced to specific phases.

When to Use

• Initializing a new Kubernetes cluster
• Troubleshooting control plane bootstrap failures
• Understanding certificate generation and static pod deployment
• Planning HA control plane setup

The 14 Phases

kubeadm init phases (sequential):

1. preflight      → System requirements check
2. certs          → CA and component certificates
3. kubeconfig     → Component kubeconfig files
4. etcd           → Static Pod manifest for etcd
5. control-plane  → Static Pods for API server, controller-manager, scheduler
6. kubelet-start  → kubelet configuration and start
7. wait-control-plane → Wait for components to be healthy
8. upload-config  → Store config in ConfigMaps
9. upload-certs   → (--upload-certs) Store certs in Secret for HA
10. mark-control-plane → Add labels and taints
11. bootstrap-token → Create join token and RBAC
12. kubelet-finalize → Finalize kubelet TLS bootstrap
13. addon         → Install CoreDNS and kube-proxy
14. show-join-command → Display join command

Quick Reference

Configuration Approaches

CLI Options (Simple)

kubeadm init \
  --apiserver-advertise-address=192.168.10.100 \
  --pod-network-cidr=10.244.0.0/16 \
  --service-cidr=10.96.0.0/16 \
  --kubernetes-version=1.32.11

Configuration File (Recommended)

# kubeadm-init.yaml
apiVersion: kubeadm.k8s.io/v1beta4
kind: InitConfiguration
bootstrapTokens:
- token: "123456.1234567890123456"
  ttl: "24h"
nodeRegistration:
  kubeletExtraArgs:
    - name: node-ip
      value: "192.168.10.100"
  criSocket: "unix:///run/containerd/containerd.sock"
localAPIEndpoint:
  advertiseAddress: "192.168.10.100"
---
apiVersion: kubeadm.k8s.io/v1beta4
kind: ClusterConfiguration
kubernetesVersion: "1.32.11"
networking:
  podSubnet: "10.244.0.0/16"      # Flannel default
  serviceSubnet: "10.96.0.0/16"

kubeadm init --config=kubeadm-init.yaml

Critical Options

Phase-by-Phase Execution

Run individual phases when customization needed:

# Generate only certificates
kubeadm init phase certs all --config=kubeadm-init.yaml

# Generate manifests for customization
kubeadm init phase control-plane all --config=kubeadm-init.yaml
# Edit /etc/kubernetes/manifests/*.yaml
# Skip that phase in full init
kubeadm init --skip-phases=control-plane --config=kubeadm-init.yaml

Pre-flight Verification

# Check required images
kubeadm config images list

# Pre-pull images (reduces init time)
kubeadm config images pull

# Dry-run to see what will happen
kubeadm init --config=kubeadm-init.yaml --dry-run

Post-Init Steps

1. Configure kubectl

mkdir -p $HOME/.kube
cp /etc/kubernetes/admin.conf $HOME/.kube/config
chown $(id -u):$(id -g) $HOME/.kube/config

2. Install CNI (Required)

# Flannel
kubectl apply -f https://raw.githubusercontent.com/flannel-io/flannel/master/Documentation/kube-flannel.yml

# Or Calico
kubectl apply -f https://docs.projectcalico.org/manifests/calico.yaml

3. Verify

kubectl get nodes              # Should show Ready after CNI
kubectl get pods -n kube-system  # CoreDNS should become Running

Common Issues

Certificate Structure

/etc/kubernetes/pki/
├── ca.crt, ca.key              # Cluster CA
├── apiserver.crt, apiserver.key
├── apiserver-kubelet-client.crt
├── front-proxy-ca.crt          # Aggregation Layer CA
├── front-proxy-client.crt
├── sa.key, sa.pub              # ServiceAccount signing
└── etcd/
    ├── ca.crt, ca.key          # etcd CA (separate from cluster CA)
    ├── server.crt, server.key
    ├── peer.crt, peer.key
    └── healthcheck-client.crt

HA Considerations

Must set at first init (cannot add later):

• --control-plane-endpoint: Points to load balancer
• Can be DNS name initially pointing to single node

kubeadm init \
  --control-plane-endpoint "k8s-api.example.com:6443" \
  --upload-certs

Reset and Retry

# Full reset
kubeadm reset -f
rm -rf /etc/kubernetes /var/lib/kubelet /var/lib/etcd ~/.kube
iptables -F && iptables -t nat -F

# Then re-init
kubeadm init --config=kubeadm-init.yaml

Verification Checklist

After successful init:

• kubectl cluster-info shows API server
• Static pods running: crictl ps | grep -E 'apiserver|etcd|scheduler|controller'
• Certificates in /etc/kubernetes/pki/
• kubeconfig files in /etc/kubernetes/
• kubelet running: systemctl status kubelet
• Join command displayed with token and CA hash