RedKenrok When to use this skill
Can simulate 2D rigid body physics in a realistic manner. This module is based on Box2D, and this API corresponds to the Box2D API as closely as possible. Use this skill when working with physics operations, collision detection, rigid body dynamics, or any physics-related operations in LÖVE games.
Common use cases
- Creating physics-based game mechanics
- Implementing realistic object interactions
- Handling collision detection and response
- Working with rigid bodies and constraints
- Simulating real-world physics behavior
Functions
love.physics.getDistance(fixture1: Fixture, fixture2: Fixture) -> distance: number, x1: number, y1: number, x2: number, y2: number: Returns the two closest points between two fixtures and their distance.love.physics.getMeter() -> scale: number: Returns the meter scale factor. All coordinates in the physics module are divided by this number, creating a convenient way to draw the objects directly to the screen without the need for graphics transformations. It is recommended to create shapes no larger than 10 times the scale. This is important because Box2D is tuned to work well with shape sizes from 0.1 to 10 meters.love.physics.newBody(world: World, x: number, y: number, type: BodyType) -> body: Body: Creates a new body. There are three types of bodies. * Static bodies do not move, have a infinite mass, and can be used for level boundaries. * Dynamic bodies are the main actors in the simulation, they collide with everything. * Kinematic bodies do not react to forces and only collide with dynamic bodies. The mass of the body gets calculated when a Fixture is attached or removed, but can be changed at any time with Body:setMass or Body:resetMassData.love.physics.newChainShape- Creates a new ChainShape.love.physics.newChainShape(loop: boolean, x1: number, y1: number, x2: number, y2: number, ...: number) -> shape: ChainShape: No descriptionlove.physics.newChainShape(loop: boolean, points: table) -> shape: ChainShape: No description
love.physics.newCircleShape- Creates a new CircleShape.love.physics.newCircleShape(radius: number) -> shape: CircleShape: No descriptionlove.physics.newCircleShape(x: number, y: number, radius: number) -> shape: CircleShape: No description
love.physics.newDistanceJoint(body1: Body, body2: Body, x1: number, y1: number, x2: number, y2: number, collideConnected: boolean) -> joint: DistanceJoint: Creates a DistanceJoint between two bodies. This joint constrains the distance between two points on two bodies to be constant. These two points are specified in world coordinates and the two bodies are assumed to be in place when this joint is created. The first anchor point is connected to the first body and the second to the second body, and the points define the length of the distance joint.love.physics.newEdgeShape(x1: number, y1: number, x2: number, y2: number) -> shape: EdgeShape: Creates a new EdgeShape.love.physics.newFixture(body: Body, shape: Shape, density: number) -> fixture: Fixture: Creates and attaches a Fixture to a body. Note that the Shape object is copied rather than kept as a reference when the Fixture is created. To get the Shape object that the Fixture owns, use Fixture:getShape.love.physics.newFrictionJoint- Create a friction joint between two bodies. A FrictionJoint applies friction to a body.love.physics.newFrictionJoint(body1: Body, body2: Body, x: number, y: number, collideConnected: boolean) -> joint: FrictionJoint: No descriptionlove.physics.newFrictionJoint(body1: Body, body2: Body, x1: number, y1: number, x2: number, y2: number, collideConnected: boolean) -> joint: FrictionJoint: No description
love.physics.newGearJoint(joint1: Joint, joint2: Joint, ratio: number, collideConnected: boolean) -> joint: GearJoint: Create a GearJoint connecting two Joints. The gear joint connects two joints that must be either prismatic or revolute joints. Using this joint requires that the joints it uses connect their respective bodies to the ground and have the ground as the first body. When destroying the bodies and joints you must make sure you destroy the gear joint before the other joints. The gear joint has a ratio the determines how the angular or distance values of the connected joints relate to each other. The formula coordinate1 + ratio * coordinate2 always has a constant value that is set when the gear joint is created.love.physics.newMotorJoint- Creates a joint between two bodies which controls the relative motion between them. Position and rotation offsets can be specified once the MotorJoint has been created, as well as the maximum motor force and torque that will be be applied to reach the target offsets.love.physics.newMotorJoint(body1: Body, body2: Body, correctionFactor: number) -> joint: MotorJoint: No descriptionlove.physics.newMotorJoint(body1: Body, body2: Body, correctionFactor: number, collideConnected: boolean) -> joint: MotorJoint: No description
love.physics.newMouseJoint(body: Body, x: number, y: number) -> joint: MouseJoint: Create a joint between a body and the mouse. This joint actually connects the body to a fixed point in the world. To make it follow the mouse, the fixed point must be updated every timestep (example below). The advantage of using a MouseJoint instead of just changing a body position directly is that collisions and reactions to other joints are handled by the physics engine.love.physics.newPolygonShape- Creates a new PolygonShape. This shape can have 8 vertices at most, and must form a convex shape.love.physics.newPolygonShape(x1: number, y1: number, x2: number, y2: number, x3: number, y3: number, ...: number) -> shape: PolygonShape: No descriptionlove.physics.newPolygonShape(vertices: table) -> shape: PolygonShape: No description
love.physics.newPrismaticJoint- Creates a PrismaticJoint between two bodies. A prismatic joint constrains two bodies to move relatively to each other on a specified axis. It does not allow for relative rotation. Its definition and operation are similar to a revolute joint, but with translation and force substituted for angle and torque.love.physics.newPrismaticJoint(body1: Body, body2: Body, x: number, y: number, ax: number, ay: number, collideConnected: boolean) -> joint: PrismaticJoint: No descriptionlove.physics.newPrismaticJoint(body1: Body, body2: Body, x1: number, y1: number, x2: number, y2: number, ax: number, ay: number, collideConnected: boolean) -> joint: PrismaticJoint: No descriptionlove.physics.newPrismaticJoint(body1: Body, body2: Body, x1: number, y1: number, x2: number, y2: number, ax: number, ay: number, collideConnected: boolean, referenceAngle: number) -> joint: PrismaticJoint: No description
love.physics.newPulleyJoint(body1: Body, body2: Body, gx1: number, gy1: number, gx2: number, gy2: number, x1: number, y1: number, x2: number, y2: number, ratio: number, collideConnected: boolean) -> joint: PulleyJoint: Creates a PulleyJoint to join two bodies to each other and the ground. The pulley joint simulates a pulley with an optional block and tackle. If the ratio parameter has a value different from one, then the simulated rope extends faster on one side than the other. In a pulley joint the total length of the simulated rope is the constant length1 + ratio * length2, which is set when the pulley joint is created. Pulley joints can behave unpredictably if one side is fully extended. It is recommended that the method setMaxLengths be used to constrain the maximum lengths each side can attain.love.physics.newRectangleShape- Shorthand for creating rectangular PolygonShapes. By default, the local origin is located at the '''center''' of the rectangle as opposed to the top left for graphics.love.physics.newRectangleShape(width: number, height: number) -> shape: PolygonShape: No descriptionlove.physics.newRectangleShape(x: number, y: number, width: number, height: number, angle: number) -> shape: PolygonShape: No description
love.physics.newRevoluteJoint- Creates a pivot joint between two bodies. This joint connects two bodies to a point around which they can pivot.love.physics.newRevoluteJoint(body1: Body, body2: Body, x: number, y: number, collideConnected: boolean) -> joint: RevoluteJoint: No descriptionlove.physics.newRevoluteJoint(body1: Body, body2: Body, x1: number, y1: number, x2: number, y2: number, collideConnected: boolean, referenceAngle: number) -> joint: RevoluteJoint: No description
love.physics.newRopeJoint(body1: Body, body2: Body, x1: number, y1: number, x2: number, y2: number, maxLength: number, collideConnected: boolean) -> joint: RopeJoint: Creates a joint between two bodies. Its only function is enforcing a max distance between these bodies.love.physics.newWeldJoint- Creates a constraint joint between two bodies. A WeldJoint essentially glues two bodies together. The constraint is a bit soft, however, due to Box2D's iterative solver.love.physics.newWeldJoint(body1: Body, body2: Body, x: number, y: number, collideConnected: boolean) -> joint: WeldJoint: No descriptionlove.physics.newWeldJoint(body1: Body, body2: Body, x1: number, y1: number, x2: number, y2: number, collideConnected: boolean) -> joint: WeldJoint: No descriptionlove.physics.newWeldJoint(body1: Body, body2: Body, x1: number, y1: number, x2: number, y2: number, collideConnected: boolean, referenceAngle: number) -> joint: WeldJoint: No description
love.physics.newWheelJoint- Creates a wheel joint.love.physics.newWheelJoint(body1: Body, body2: Body, x: number, y: number, ax: number, ay: number, collideConnected: boolean) -> joint: WheelJoint: No descriptionlove.physics.newWheelJoint(body1: Body, body2: Body, x1: number, y1: number, x2: number, y2: number, ax: number, ay: number, collideConnected: boolean) -> joint: WheelJoint: No description
love.physics.newWorld(xg: number, yg: number, sleep: boolean) -> world: World: Creates a new World.love.physics.setMeter(scale: number): Sets the pixels to meter scale factor. All coordinates in the physics module are divided by this number and converted to meters, and it creates a convenient way to draw the objects directly to the screen without the need for graphics transformations. It is recommended to create shapes no larger than 10 times the scale. This is important because Box2D is tuned to work well with shape sizes from 0.1 to 10 meters. The default meter scale is 30.
Types
Body: Bodies are objects with velocity and position.love.Body.applyAngularImpulse(impulse: number): Applies an angular impulse to a body. This makes a single, instantaneous addition to the body momentum. A body with with a larger mass will react less. The reaction does '''not''' depend on the timestep, and is equivalent to applying a force continuously for 1 second. Impulses are best used to give a single push to a body. For a continuous push to a body it is better to use Body:applyForce.love.Body.applyForce(fx: number, fy: number): Apply force to a Body. A force pushes a body in a direction. A body with with a larger mass will react less. The reaction also depends on how long a force is applied: since the force acts continuously over the entire timestep, a short timestep will only push the body for a short time. Thus forces are best used for many timesteps to give a continuous push to a body (like gravity). For a single push that is independent of timestep, it is better to use Body:applyLinearImpulse. If the position to apply the force is not given, it will act on the center of mass of the body. The part of the force not directed towards the center of mass will cause the body to spin (and depends on the rotational inertia). Note that the force components and position must be given in world coordinates.love.Body.applyLinearImpulse(ix: number, iy: number): Applies an impulse to a body. This makes a single, instantaneous addition to the body momentum. An impulse pushes a body in a direction. A body with with a larger mass will react less. The reaction does '''not''' depend on the timestep, and is equivalent to applying a force continuously for 1 second. Impulses are best used to give a single push to a body. For a continuous push to a body it is better to use Body:applyForce. If the position to apply the impulse is not given, it will act on the center of mass of the body. The part of the impulse not directed towards the center of mass will cause the body to spin (and depends on the rotational inertia). Note that the impulse components and position must be given in world coordinates.love.Body.applyTorque(torque: number): Apply torque to a body. Torque is like a force that will change the angular velocity (spin) of a body. The effect will depend on the rotational inertia a body has.love.Body.destroy(): Explicitly destroys the Body and all fixtures and joints attached to it. An error will occur if you attempt to use the object after calling this function. In 0.7.2, when you don't have time to wait for garbage collection, this function may be used to free the object immediately.love.Body.getAngle() -> angle: number: Get the angle of the body. The angle is measured in radians. If you need to transform it to degrees, use math.deg. A value of 0 radians will mean 'looking to the right'. Although radians increase counter-clockwise, the y axis points down so it becomes ''clockwise'' from our point of view.love.Body.getAngularDamping() -> damping: number: Gets the Angular damping of the Body The angular damping is the ''rate of decrease of the angular velocity over time'': A spinning body with no damping and no external forces will continue spinning indefinitely. A spinning body with damping will gradually stop spinning. Damping is not the same as friction - they can be modelled together. However, only damping is provided by Box2D (and LOVE). Damping parameters should be between 0 and infinity, with 0 meaning no damping, and infinity meaning full damping. Normally you will use a damping value between 0 and 0.1.love.Body.getAngularVelocity() -> w: number: Get the angular velocity of the Body. The angular velocity is the ''rate of change of angle over time''. It is changed in World:update by applying torques, off centre forces/impulses, and angular damping. It can be set directly with Body:setAngularVelocity. If you need the ''rate of change of position over time'', use Body:getLinearVelocity.love.Body.getContacts() -> contacts: table: Gets a list of all Contacts attached to the Body.love.Body.getFixtures() -> fixtures: table: Returns a table with all fixtures.love.Body.getGravityScale() -> scale: number: Returns the gravity scale factor.love.Body.getInertia() -> inertia: number: Gets the rotational inertia of the body. The rotational inertia is how hard is it to make the body spin.love.Body.getJoints() -> joints: table: Returns a table containing the Joints attached to this Body.love.Body.getLinearDamping() -> damping: number: Gets the linear damping of the Body. The linear damping is the ''rate of decrease of the linear velocity over time''. A moving body with no damping and no external forces will continue moving indefinitely, as is the case in space. A moving body with damping will gradually stop moving. Damping is not the same as friction - they can be modelled together.love.Body.getLinearVelocity() -> x: number, y: number: Gets the linear velocity of the Body from its center of mass. The linear velocity is the ''rate of change of position over time''. If you need the ''rate of change of angle over time'', use Body:getAngularVelocity. If you need to get the linear velocity of a point different from the center of mass: * Body:getLinearVelocityFromLocalPoint allows you to specify the point in local coordinates. * Body:getLinearVelocityFromWorldPoint allows you to specify the point in world coordinates. See page 136 of 'Essential Mathematics for Games and Interactive Applications' for definitions of local and world coordinates.love.Body.getLinearVelocityFromLocalPoint(x: number, y: number) -> vx: number, vy: number: Get the linear velocity of a point on the body. The linear velocity for a point on the body is the velocity of the body center of mass plus the velocity at that point from the body spinning. The point on the body must given in local coordinates. Use Body:getLinearVelocityFromWorldPoint to specify this with world coordinates.love.Body.getLinearVelocityFromWorldPoint(x: number, y: number) -> vx: number, vy: number: Get the linear velocity of a point on the body. The linear velocity for a point on the body is the velocity of the body center of mass plus the velocity at that point from the body spinning. The point on the body must given in world coordinates. Use Body:getLinearVelocityFromLocalPoint to specify this with local coordinates.love.Body.getLocalCenter() -> x: number, y: number: Get the center of mass position in local coordinates. Use Body:getWorldCenter to get the center of mass in world coordinates.love.Body.getLocalPoint(worldX: number, worldY: number) -> localX: number, localY: number: Transform a point from world coordinates to local coordinates.love.Body.getLocalPoints(x1: number, y1: number, x2: number, y2: number, ...: number) -> x1: number, y1: number, x2: number, y2: number, ...: number: Transforms multiple points from world coordinates to local coordinates.love.Body.getLocalVector(worldX: number, worldY: number) -> localX: number, localY: number: Transform a vector from world coordinates to local coordinates.love.Body.getMass() -> mass: number: Get the mass of the body. Static bodies always have a mass of 0.love.Body.getMassData() -> x: number, y: number, mass: number, inertia: number: Returns the mass, its center, and the rotational inertia.love.Body.getPosition() -> x: number, y: number: Get the position of the body. Note that this may not be the center of mass of the body.love.Body.getTransform() -> x: number, y: number, angle: number: Get the position and angle of the body. Note that the position may not be the center of mass of the body. An angle of 0 radians will mean 'looking to the right'. Although radians increase counter-clockwise, the y axis points down so it becomes clockwise from our point of view.love.Body.getType() -> type: BodyType: Returns the type of the body.love.Body.getUserData() -> value: any: Returns the Lua value associated with this Body.love.Body.getWorld() -> world: World: Gets the World the body lives in.love.Body.getWorldCenter() -> x: number, y: number: Get the center of mass position in world coordinates. Use Body:getLocalCenter to get the center of mass in local coordinates.love.Body.getWorldPoint(localX: number, localY: number) -> worldX: number, worldY: number: Transform a point from local coordinates to world coordinates.love.Body.getWorldPoints(x1: number, y1: number, x2: number, y2: number) -> x1: number, y1: number, x2: number, y2: number: Transforms multiple points from local coordinates to world coordinates.love.Body.getWorldVector(localX: number, localY: number) -> worldX: number, worldY: number: Transform a vector from local coordinates to world coordinates.love.Body.getX() -> x: number: Get the x position of the body in world coordinates.love.Body.getY() -> y: number: Get the y position of the body in world coordinates.love.Body.isActive() -> status: boolean: Returns whether the body is actively used in the simulation.love.Body.isAwake() -> status: boolean: Returns the sleep status of the body.love.Body.isBullet() -> status: boolean: Get the bullet status of a body. There are two methods to check for body collisions: * at their location when the world is updated (default) * using continuous collision detection (CCD) The default method is efficient, but a body moving very quickly may sometimes jump over another body without producing a collision. A body that is set as a bullet will use CCD. This is less efficient, but is guaranteed not to jump when moving quickly. Note that static bodies (with zero mass) always use CCD, so your walls will not let a fast moving body pass through even if it is not a bullet.love.Body.isDestroyed() -> destroyed: boolean: Gets whether the Body is destroyed. Destroyed bodies cannot be used.love.Body.isFixedRotation() -> fixed: boolean: Returns whether the body rotation is locked.love.Body.isSleepingAllowed() -> allowed: boolean: Returns the sleeping behaviour of the body.love.Body.isTouching(otherbody: Body) -> touching: boolean: Gets whether the Body is touching the given other Body.love.Body.resetMassData(): Resets the mass of the body by recalculating it from the mass properties of the fixtures.love.Body.setActive(active: boolean): Sets whether the body is active in the world. An inactive body does not take part in the simulation. It will not move or cause any collisions.love.Body.setAngle(angle: number): Set the angle of the body. The angle is measured in radians. If you need to transform it from degrees, use math.rad. A value of 0 radians will mean 'looking to the right'. Although radians increase counter-clockwise, the y axis points down so it becomes ''clockwise'' from our point of view. It is possible to cause a collision with another body by changing its angle.love.Body.setAngularDamping(damping: number): Sets the angular damping of a Body See Body:getAngularDamping for a definition of angular damping. Angular damping can take any value from 0 to infinity. It is recommended to stay between 0 and 0.1, though. Other values will look unrealistic.love.Body.setAngularVelocity(w: number): Sets the angular velocity of a Body. The angular velocity is the ''rate of change of angle over time''. This function will not accumulate anything; any impulses previously applied since the last call to World:update will be lost.love.Body.setAwake(awake: boolean): Wakes the body up or puts it to sleep.love.Body.setBullet(status: boolean): Set the bullet status of a body. There are two methods to check for body collisions: * at their location when the world is updated (default) * using continuous collision detection (CCD) The default method is efficient, but a body moving very quickly may sometimes jump over another body without producing a collision. A body that is set as a bullet will use CCD. This is less efficient, but is guaranteed not to jump when moving quickly. Note that static bodies (with zero mass) always use CCD, so your walls will not let a fast moving body pass through even if it is not a bullet.love.Body.setFixedRotation(isFixed: boolean): Set whether a body has fixed rotation. Bodies with fixed rotation don't vary the speed at which they rotate. Calling this function causes the mass to be reset.love.Body.setGravityScale(scale: number): Sets a new gravity scale factor for the body.love.Body.setInertia(inertia: number): Set the inertia of a body.love.Body.setLinearDamping(ld: number): Sets the linear damping of a Body See Body:getLinearDamping for a definition of linear damping. Linear damping can take any value from 0 to infinity. It is recommended to stay between 0 and 0.1, though. Other values will make the objects look 'floaty'(if gravity is enabled).love.Body.setLinearVelocity(x: number, y: number): Sets a new linear velocity for the Body. This function will not accumulate anything; any impulses previously applied since the last call to World:update will be lost.love.Body.setMass(mass: number): Sets a new body mass.love.Body.setMassData(x: number, y: number, mass: number, inertia: number): Overrides the calculated mass data.love.Body.setPosition(x: number, y: number): Set the position of the body. Note that this may not be the center of mass of the body. This function cannot wake up the body.love.Body.setSleepingAllowed(allowed: boolean): Sets the sleeping behaviour of the body. Should sleeping be allowed, a body at rest will automatically sleep. A sleeping body is not simulated unless it collided with an awake body. Be wary that one can end up with a situation like a floating sleeping body if the floor was removed.love.Body.setTransform(x: number, y: number, angle: number): Set the position and angle of the body. Note that the position may not be the center of mass of the body. An angle of 0 radians will mean 'looking to the right'. Although radians increase counter-clockwise, the y axis points down so it becomes clockwise from our point of view. This function cannot wake up the body.love.Body.setType(type: BodyType): Sets a new body type.love.Body.setUserData(value: any): Associates a Lua value with the Body. To delete the reference, explicitly pass nil.love.Body.setX(x: number): Set the x position of the body. This function cannot wake up the body.love.Body.setY(y: number): Set the y position of the body. This function cannot wake up the body.
ChainShape: A ChainShape consists of multiple line segments. It can be used to create the boundaries of your terrain. The shape does not have volume and can only collide with PolygonShape and CircleShape. Unlike the PolygonShape, the ChainShape does not have a vertices limit or has to form a convex shape, but self intersections are not supported.love.ChainShape.getChildEdge(index: number) -> shape: EdgeShape: Returns a child of the shape as an EdgeShape.love.ChainShape.getNextVertex() -> x: number, y: number: Gets the vertex that establishes a connection to the next shape. Setting next and previous ChainShape vertices can help prevent unwanted collisions when a flat shape slides along the edge and moves over to the new shape.love.ChainShape.getPoint(index: number) -> x: number, y: number: Returns a point of the shape.love.ChainShape.getPoints() -> x1: number, y1: number, x2: number, y2: number: Returns all points of the shape.love.ChainShape.getPreviousVertex() -> x: number, y: number: Gets the vertex that establishes a connection to the previous shape. Setting next and previous ChainShape vertices can help prevent unwanted collisions when a flat shape slides along the edge and moves over to the new shape.love.ChainShape.getVertexCount() -> count: number: Returns the number of vertices the shape has.love.ChainShape.setNextVertex(x: number, y: number): Sets a vertex that establishes a connection to the next shape. This can help prevent unwanted collisions when a flat shape slides along the edge and moves over to the new shape.love.ChainShape.setPreviousVertex(x: number, y: number): Sets a vertex that establishes a connection to the previous shape. This can help prevent unwanted collisions when a flat shape slides along the edge and moves over to the new shape.
CircleShape: Circle extends Shape and adds a radius and a local position.love.CircleShape.getPoint() -> x: number, y: number: Gets the center point of the circle shape.love.CircleShape.getRadius() -> radius: number: Gets the radius of the circle shape.love.CircleShape.setPoint(x: number, y: number): Sets the location of the center of the circle shape.love.CircleShape.setRadius(radius: number): Sets the radius of the circle.
Contact: Contacts are objects created to manage collisions in worlds.love.Contact.getChildren() -> indexA: number, indexB: number: Gets the child indices of the shapes of the two colliding fixtures. For ChainShapes, an index of 1 is the first edge in the chain. Used together with Fixture:rayCast or ChainShape:getChildEdge.love.Contact.getFixtures() -> fixtureA: Fixture, fixtureB: Fixture: Gets the two Fixtures that hold the shapes that are in contact.love.Contact.getFriction() -> friction: number: Get the friction between two shapes that are in contact.love.Contact.getNormal() -> nx: number, ny: number: Get the normal vector between two shapes that are in contact. This function returns the coordinates of a unit vector that points from the first shape to the second.love.Contact.getPositions() -> x1: number, y1: number, x2: number, y2: number: Returns the contact points of the two colliding fixtures. There can be one or two points.love.Contact.getRestitution() -> restitution: number: Get the restitution between two shapes that are in contact.love.Contact.isEnabled() -> enabled: boolean: Returns whether the contact is enabled. The collision will be ignored if a contact gets disabled in the preSolve callback.love.Contact.isTouching() -> touching: boolean: Returns whether the two colliding fixtures are touching each other.love.Contact.resetFriction(): Resets the contact friction to the mixture value of both fixtures.love.Contact.resetRestitution(): Resets the contact restitution to the mixture value of both fixtures.love.Contact.setEnabled(enabled: boolean): Enables or disables the contact.love.Contact.setFriction(friction: number): Sets the contact friction.love.Contact.setRestitution(restitution: number): Sets the contact restitution.
DistanceJoint: Keeps two bodies at the same distance.love.DistanceJoint.getDampingRatio() -> ratio: number: Gets the damping ratio.love.DistanceJoint.getFrequency() -> Hz: number: Gets the response speed.love.DistanceJoint.getLength() -> l: number: Gets the equilibrium distance between the two Bodies.love.DistanceJoint.setDampingRatio(ratio: number): Sets the damping ratio.love.DistanceJoint.setFrequency(Hz: number): Sets the response speed.love.DistanceJoint.setLength(l: number): Sets the equilibrium distance between the two Bodies.
EdgeShape: A EdgeShape is a line segment. They can be used to create the boundaries of your terrain. The shape does not have volume and can only collide with PolygonShape and CircleShape.love.EdgeShape.getNextVertex() -> x: number, y: number: Gets the vertex that establishes a connection to the next shape. Setting next and previous EdgeShape vertices can help prevent unwanted collisions when a flat shape slides along the edge and moves over to the new shape.love.EdgeShape.getPoints() -> x1: number, y1: number, x2: number, y2: number: Returns the local coordinates of the edge points.love.EdgeShape.getPreviousVertex() -> x: number, y: number: Gets the vertex that establishes a connection to the previous shape. Setting next and previous EdgeShape vertices can help prevent unwanted collisions when a flat shape slides along the edge and moves over to the new shape.love.EdgeShape.setNextVertex(x: number, y: number): Sets a vertex that establishes a connection to the next shape. This can help prevent unwanted collisions when a flat shape slides along the edge and moves over to the new shape.love.EdgeShape.setPreviousVertex(x: number, y: number): Sets a vertex that establishes a connection to the previous shape. This can help prevent unwanted collisions when a flat shape slides along the edge and moves over to the new shape.
Fixture: Fixtures attach shapes to bodies.love.Fixture.destroy(): Destroys the fixture.love.Fixture.getBody() -> body: Body: Returns the body to which the fixture is attached.love.Fixture.getBoundingBox(index: number) -> topLeftX: number, topLeftY: number, bottomRightX: number, bottomRightY: number: Returns the points of the fixture bounding box. In case the fixture has multiple children a 1-based index can be specified. For example, a fixture will have multiple children with a chain shape.love.Fixture.getCategory() -> ...: number: Returns the categories the fixture belongs to.love.Fixture.getDensity() -> density: number: Returns the density of the fixture.love.Fixture.getFilterData() -> categories: number, mask: number, group: number: Returns the filter data of the fixture. Categories and masks are encoded as the bits of a 16-bit integer.love.Fixture.getFriction() -> friction: number: Returns the friction of the fixture.love.Fixture.getGroupIndex() -> group: number: Returns the group the fixture belongs to. Fixtures with the same group will always collide if the group is positive or never collide if it's negative. The group zero means no group. The groups range from -32768 to 32767.love.Fixture.getMask() -> ...: number: Returns which categories this fixture should '''NOT''' collide with.love.Fixture.getMassData() -> x: number, y: number, mass: number, inertia: number: Returns the mass, its center and the rotational inertia.love.Fixture.getRestitution() -> restitution: number: Returns the restitution of the fixture.love.Fixture.getShape() -> shape: Shape: Returns the shape of the fixture. This shape is a reference to the actual data used in the simulation. It's possible to change its values between timesteps.love.Fixture.getUserData() -> value: any: Returns the Lua value associated with this fixture.love.Fixture.isDestroyed() -> destroyed: boolean: Gets whether the Fixture is destroyed. Destroyed fixtures cannot be used.love.Fixture.isSensor() -> sensor: boolean: Returns whether the fixture is a sensor.love.Fixture.rayCast(x1: number, y1: number, x2: number, y2: number, maxFraction: number, childIndex: number) -> xn: number, yn: number, fraction: number: Casts a ray against the shape of the fixture and returns the surface normal vector and the line position where the ray hit. If the ray missed the shape, nil will be returned. The ray starts on the first point of the input line and goes towards the second point of the line. The fifth argument is the maximum distance the ray is going to travel as a scale factor of the input line length. The childIndex parameter is used to specify which child of a parent shape, such as a ChainShape, will be ray casted. For ChainShapes, the index of 1 is the first edge on the chain. Ray casting a parent shape will only test the child specified so if you want to test every shape of the parent, you must loop through all of its children. The world position of the impact can be calculated by multiplying the line vector with the third return value and adding it to the line starting point. hitx, hity = x1 + (x2 - x1) * fraction, y1 + (y2 - y1) * fractionlove.Fixture.setCategory(...: number): Sets the categories the fixture belongs to. There can be up to 16 categories represented as a number from 1 to 16. All fixture's default category is 1.love.Fixture.setDensity(density: number): Sets the density of the fixture. Call Body:resetMassData if this needs to take effect immediately.love.Fixture.setFilterData(categories: number, mask: number, group: number): Sets the filter data of the fixture. Groups, categories, and mask can be used to define the collision behaviour of the fixture. If two fixtures are in the same group they either always collide if the group is positive, or never collide if it's negative. If the group is zero or they do not match, then the contact filter checks if the fixtures select a category of the other fixture with their masks. The fixtures do not collide if that's not the case. If they do have each other's categories selected, the return value of the custom contact filter will be used. They always collide if none was set. There can be up to 16 categories. Categories and masks are encoded as the bits of a 16-bit integer. When created, prior to calling this function, all fixtures have category set to 1, mask set to 65535 (all categories) and group set to 0. This function allows setting all filter data for a fixture at once. To set only the categories, the mask or the group, you can use Fixture:setCategory, Fixture:setMask or Fixture:setGroupIndex respectively.love.Fixture.setFriction(friction: number): Sets the friction of the fixture. Friction determines how shapes react when they 'slide' along other shapes. Low friction indicates a slippery surface, like ice, while high friction indicates a rough surface, like concrete. Range: 0.0 - 1.0.love.Fixture.setGroupIndex(group: number): Sets the group the fixture belongs to. Fixtures with the same group will always collide if the group is positive or never collide if it's negative. The group zero means no group. The groups range from -32768 to 32767.love.Fixture.setMask(...: number): Sets the category mask of the fixture. There can be up to 16 categories represented as a number from 1 to 16. This fixture will '''NOT''' collide with the fixtures that are in the selected categories if the other fixture also has a category of this fixture selected.love.Fixture.setRestitution(restitution: number): Sets the restitution of the fixture.love.Fixture.setSensor(sensor: boolean): Sets whether the fixture should act as a sensor. Sensors do not cause collision responses, but the begin-contact and end-contact World callbacks will still be called for this fixture.love.Fixture.setUserData(value: any): Associates a Lua value with the fixture. To delete the reference, explicitly pass nil.love.Fixture.testPoint(x: number, y: number) -> isInside: boolean: Checks if a point is inside the shape of the fixture.
FrictionJoint: A FrictionJoint applies friction to a body.love.FrictionJoint.getMaxForce() -> force: number: Gets the maximum friction force in Newtons.love.FrictionJoint.getMaxTorque() -> torque: number: Gets the maximum friction torque in Newton-meters.love.FrictionJoint.setMaxForce(maxForce: number): Sets the maximum friction force in Newtons.love.FrictionJoint.setMaxTorque(torque: number): Sets the maximum friction torque in Newton-meters.
GearJoint: Keeps bodies together in such a way that they act like gears.love.GearJoint.getJoints() -> joint1: Joint, joint2: Joint: Get the Joints connected by this GearJoint.love.GearJoint.getRatio() -> ratio: number: Get the ratio of a gear joint.love.GearJoint.setRatio(ratio: number): Set the ratio of a gear joint.
Joint: Attach multiple bodies together to interact in unique ways.love.Joint.destroy(): Explicitly destroys the Joint. An error will occur if you attempt to use the object after calling this function. In 0.7.2, when you don't have time to wait for garbage collection, this function may be used to free the object immediately.love.Joint.getAnchors() -> x1: number, y1: number, x2: number, y2: number: Get the anchor points of the joint.love.Joint.getBodies() -> bodyA: Body, bodyB: Body: Gets the bodies that the Joint is attached to.love.Joint.getCollideConnected() -> c: boolean: Gets whether the connected Bodies collide.love.Joint.getReactionForce(x: number) -> x: number, y: number: Returns the reaction force in newtons on the second bodylove.Joint.getReactionTorque(invdt: number) -> torque: number: Returns the reaction torque on the second body.love.Joint.getType() -> type: JointType: Gets a string representing the type.love.Joint.getUserData() -> value: any: Returns the Lua value associated with this Joint.love.Joint.isDestroyed() -> destroyed: boolean: Gets whether the Joint is destroyed. Destroyed joints cannot be used.love.Joint.setUserData(value: any): Associates a Lua value with the Joint. To delete the reference, explicitly pass nil.
MotorJoint: Controls the relative motion between two Bodies. Position and rotation offsets can be specified, as well
…(truncated)