Connect Cdc Dynamodb

Redpanda Connect CDC: AWS DynamoDB

The aws_dynamodb_cdc input reads change events from DynamoDB Streams into Redpanda or any Kafka-compatible broker. It manages shard lifecycle automatically, writes checkpoints to a dedicated DynamoDB table, and supports an optional initial Scan snapshot before switching to streaming. Available from Redpanda Connect v4.79.0 with status Stable. It is classified as an enterprise-tier connector, and its source is an Enterprise-licensed file under the Redpanda Community License. Unlike the other enterprise *_cdc inputs, however, the connector's source currently enforces no runtime Enterprise license gate.

Three table-discovery modes cover single-table, explicit-list, and tag-based multi-table scenarios. The 24-hour DynamoDB Streams retention window is the key operational constraint: the connector must remain running or resume within that window or it re-runs a snapshot to avoid data loss.

Quickstart

1. Enable DynamoDB Streams on your table

# Enable NEW_AND_OLD_IMAGES stream on an existing table
aws dynamodb update-table \
  --table-name orders \
  --stream-specification StreamEnabled=true,StreamViewType=NEW_AND_OLD_IMAGES

# Verify
aws dynamodb describe-table --table-name orders \
  --query "Table.StreamSpecification"

2. Create the IAM policy

# Save as dynamodb-cdc-policy.json (replace REGION, ACCOUNT_ID, TABLE_NAME)
cat > dynamodb-cdc-policy.json <<'EOF'
{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Sid": "DynamoDBStreams",
      "Effect": "Allow",
      "Action": [
        "dynamodb:DescribeStream",
        "dynamodb:GetRecords",
        "dynamodb:GetShardIterator"
      ],
      "Resource": "arn:aws:dynamodb:REGION:ACCOUNT_ID:table/orders/stream/*"
    },
    {
      "Sid": "DescribeSourceTable",
      "Effect": "Allow",
      "Action": ["dynamodb:DescribeTable"],
      "Resource": "arn:aws:dynamodb:REGION:ACCOUNT_ID:table/orders"
    },
    {
      "Sid": "SnapshotScan",
      "Effect": "Allow",
      "Action": ["dynamodb:Scan"],
      "Resource": "arn:aws:dynamodb:REGION:ACCOUNT_ID:table/orders"
    },
    {
      "Sid": "CheckpointTable",
      "Effect": "Allow",
      "Action": [
        "dynamodb:CreateTable",
        "dynamodb:DescribeTable",
        "dynamodb:GetItem",
        "dynamodb:PutItem",
        "dynamodb:Query"
      ],
      "Resource": "arn:aws:dynamodb:REGION:ACCOUNT_ID:table/redpanda_dynamodb_checkpoints"
    },
    {
      "Sid": "TagDiscovery",
      "Effect": "Allow",
      "Action": ["dynamodb:ListTables", "dynamodb:ListTagsOfResource"],
      "Resource": "*"
    }
  ]
}
EOF

aws iam create-policy \
  --policy-name redpanda-dynamodb-cdc \
  --policy-document file://dynamodb-cdc-policy.json

3. Create the pipeline config

# pipeline.yaml — snapshot existing data then stream changes
input:
  aws_dynamodb_cdc:
    tables: [orders]
    start_from: trim_horizon
    snapshot_mode: snapshot_and_cdc
    snapshot_segments: 4
    snapshot_throttle: 100ms
    snapshot_deduplicate: true
    checkpoint_table: redpanda_dynamodb_checkpoints
    region: us-east-1

output:
  kafka_franz:
    seed_brokers: ["localhost:9092"]
    topic: '${! meta("dynamodb_table") }-cdc'

4. Run it

# With environment credentials (IAM role / ~/.aws/credentials):
rpk connect run pipeline.yaml

# With explicit static credentials:
rpk connect run pipeline.yaml \
  -s "input.aws_dynamodb_cdc.credentials.id=${AWS_ACCESS_KEY_ID}" \
  -s "input.aws_dynamodb_cdc.credentials.secret=${AWS_SECRET_ACCESS_KEY}"

5. Inspect messages

Each message body is a JSON object with this shape. For an INSERT event the oldImage key is absent (not null); for a REMOVE event the newImage key is absent. The keys keys, newImage, oldImage, and sizeBytes are only present when the corresponding field is non-nil in the stream record:

{
  "tableName": "orders",
  "eventID": "abc123",
  "eventName": "INSERT",
  "eventVersion": "1.1",
  "eventSource": "aws:dynamodb",
  "awsRegion": "us-east-1",
  "dynamodb": {
    "sequenceNumber": "000000000000000000001",
    "streamViewType": "NEW_AND_OLD_IMAGES",
    "keys": { "orderId": "ORD-001" },
    "newImage": { "orderId": "ORD-001", "status": "pending", "total": 99.99 },
    "sizeBytes": 128
  }
}

Snapshot records use "eventName": "READ" and include only newImage. Metadata fields differ between CDC and snapshot records:

Note: dynamodb_shard_id and dynamodb_sequence_number are absent on snapshot records — not empty strings. Checking meta("dynamodb_shard_id") on a snapshot record returns a missing-key error in Bloblang.

Snapshot Modes

snapshot_and_cdc starts CDC shard readers before the Scan begins so no writes during the snapshot window are missed. Use snapshot_deduplicate: true (default) to suppress records that appear in both.

Multi-Table Discovery

# By explicit list
input:
  aws_dynamodb_cdc:
    table_discovery_mode: includelist
    tables: [orders, customers, products]
    region: us-east-1

---
# By tag — auto-discover all tables tagged stream-enabled:true
input:
  aws_dynamodb_cdc:
    table_discovery_mode: tag
    table_tag_filter: "stream-enabled:true"
    table_discovery_interval: 5m
    region: us-east-1

---
# Multi-criteria tag filter (AND across keys, OR within a key)
input:
  aws_dynamodb_cdc:
    table_discovery_mode: tag
    table_tag_filter: "environment:prod,staging;team:data,analytics"
    region: us-east-1

Snapshot modes are supported only when the effective configuration is single-table at config-validation time: table_discovery_mode: single, or table_discovery_mode: includelist with exactly one table. tag discovery mode always rejects snapshot_mode other than none at startup, even if the tag filter would match only one table — it is treated as multi-table regardless.

Per-Table Routing

Use a Bloblang mapping or switch output to route each table's events to a dedicated topic:

output:
  switch:
    cases:
      - check: 'meta("dynamodb_table") == "orders"'
        output:
          kafka_franz:
            seed_brokers: ["localhost:9092"]
            topic: orders-cdc
      - check: 'meta("dynamodb_table") == "customers"'
        output:
          kafka_franz:
            seed_brokers: ["localhost:9092"]
            topic: customers-cdc

Operational Notes

• Stream retention: DynamoDB Streams retain records for 24 hours. If the connector is down longer than that, it re-runs a snapshot on next start (in snapshot_and_cdc mode).
• Checkpoint table: Created automatically with pay-per-request billing. Uses (StreamArn, ShardID) as the primary key.
• Kinesis alternative: For up to 1-year retention, enable Kinesis Data Streams for DynamoDB and use the aws_kinesis input instead.
• License and tier: aws_dynamodb_cdc is an enterprise-tier connector whose source is an Enterprise-licensed file under the Redpanda Community License. Unlike the other enterprise *_cdc inputs, its source currently enforces no runtime Enterprise license gate (it is registered as Stable) — but treat it as enterprise-tier, since that classification (not the currently-absent gate) is authoritative.

Enterprise Features on the Destination Topic

The aws_dynamodb_cdc input is an enterprise-tier connector (its source currently enforces no runtime license gate). Separately, the Redpanda topic and cluster the CDC events land in can use Redpanda Enterprise differentiators (each requires a valid Redpanda Enterprise license on the destination cluster):

• Iceberg Topics — land CDC events directly into an Apache Iceberg table for analytics. Per-topic: redpanda.iceberg.mode (key_value | value_schema_id_prefix | value_schema_latest | disabled), redpanda.iceberg.delete, redpanda.iceberg.partition.spec, redpanda.iceberg.target.lag.ms, redpanda.iceberg.invalid.record.action (drop | dlq_table); cluster: iceberg_enabled.
• Tiered Storage — redpanda.remote.write + redpanda.remote.read (cluster cloud_storage_enabled) extend CDC retention far beyond DynamoDB Streams' 24h window.
• Remote Read Replicas — redpanda.remote.readreplica for read-only, object-storage-served copies of the CDC topic in a remote cluster.
• Shadow Linking / Shadowing — offset-preserving cross-cluster DR for the CDC topic, managed with the rpk shadow family (create/list/describe/status/update/failover/delete/config-generate). Failover preserves consumer offsets on the DR cluster.
• Server-side Schema ID Validation — redpanda.value.schema.id.validation + redpanda.value.subject.name.strategy (cluster enable_schema_id_validation = none/redpanda/compat).
• RBAC, Audit Logging, OIDC/Kerberos, FIPS — secure the CDC topic and pipeline.
• Redpanda Connect Enterprise (separate Connect license) — secrets management, configuration service, allow/deny lists.

See Enterprise Redpanda Features for grounded nested config keys, defaults, license-expiration behavior, and rpk commands.

Reference Directory

• Config Reference: Every aws_dynamodb_cdc config field with type, default, and description, grounded in source.
• DynamoDB Setup: Enabling DynamoDB Streams, stream view types, checkpoint table schema, IAM policy, and stream retention.
• Pipeline and Output: Full runnable pipelines, message/metadata shape, snapshot vs CDC modes, deduplication, and restart behavior.
• Enterprise Redpanda Features: Iceberg Topics, Tiered Storage, Remote Read Replicas, Shadow Linking (cross-cluster DR), server-side Schema ID Validation, RBAC/Audit Logging/OIDC/Kerberos/FIPS, and Redpanda Connect Enterprise — nested config keys, defaults, and which license gates each.