Revx Strategy

Strategy: Grid Bot (revx strategy grid)

Backtest, optimize, and run automated grid trading strategies.

Auth required. Make sure revx is installed and configured before running these commands. If any command fails with an auth-related error — Auth not configured, No private key found, Authentication failed (401), Invalid signature, insecure permissions, or a missing key/config file at ~/.config/revolut-x/ — invoke the revx-auth skill immediately and apply the fix yourself. Do not interrupt the user to ask them to run setup. Only escalate to the user for steps only they can perform (pasting the API key, registering the public key in their Revolut X profile, choosing a passphrase). After the fix, retry the original command.

Symbols use BASE-QUOTE format with a dash: BTC-USD, ETH-EUR, SOL-USD.

Backtest

Test a grid strategy on historical data:

revx strategy grid backtest BTC-USD
revx strategy grid backtest BTC-USD --levels 10 --range 10 --investment 1000
revx strategy grid backtest ETH-USD --days 60 --interval 4h
revx strategy grid backtest BTC-USD --split
revx strategy grid backtest BTC-USD --trailing-up --stop-loss 85000
revx strategy grid backtest BTC-USD --json

Backtest engine assumptions : The engine runs on OHLC candles and has no access to intra-candle tick data. Order execution order within each candle is determined by the direction of the candle:

Limitation: real intra-candle price action may be more complex (e.g. multiple touches of high/low), which the backtest does not reproduce.

Not long-running — completes and returns results. Run normally via the Bash tool.

Always confirm these key parameters before running: pair, investment, levels, range, and split mode. These affect capital and strategy behavior — never assume them silently. Other parameters (days, interval) can use defaults unless the user specifies otherwise.

Optimize

Test multiple parameter combinations, ranked by return:

revx strategy grid optimize BTC-USD
revx strategy grid optimize BTC-USD --investment 5000 --days 60
revx strategy grid optimize BTC-USD --levels 5,10,15,20 --ranges 3,5,10 --top 5
revx strategy grid optimize BTC-USD --split
revx strategy grid optimize BTC-USD --trailing-up --stop-loss 85000

Max 200 parameter combinations. Every combination is validated before any backtest runs. If any combination violates pair constraints or stop-loss placement, the entire optimize command fails; invalid combinations are not skipped. Not long-running — completes and returns results.

Always confirm these key parameters before running: pair, investment, and split mode. These affect capital and strategy behavior — never assume them silently. Other parameters (levels list, ranges list, days, interval, top) can use defaults unless the user specifies otherwise.

Pair Constraints and Validation

Backtest, optimize, dry-run, and live run all build the same exchange-aware grid plan before execution:

• Grid prices are rounded to the pair's quote step and must remain strictly increasing and unique.
• Quote per level is floored to the quote step; base amounts are floored to the base step.
• Every order must satisfy the pair's minimum quote value and minimum/maximum base size.
• Split mode must fit the initial market buy and each allocated sell amount within the pair limits.
• Stop-loss must be strictly below the lowest aligned grid level, and its maximum liquidation size must not exceed the maximum base order size.

Invalid parameters fail before simulation or order placement. Optimize validates all requested combinations first and fails as a whole if any one is invalid. Increasing levels reduces capital per level, so a 100-level-per-side grid may require a larger investment than a smaller grid.

Run (Live Trading)

Human Confirmation Required

NEVER execute revx strategy grid run (without --dry-run) without explicit user confirmation. This command places real orders with real money.

Before running a live grid bot, present a confirmation summary to the user:

Grid bot to launch:

• Pair: BTC-USD
• Investment: $500
• Levels: 10 per side
• Range: +/-5%
• Mode: LIVE (real orders)

This will place real buy and sell orders. Shall I proceed?

Only execute after the user explicitly approves. --dry-run does not require confirmation (no real orders).

Always Suggest Dry Run First

When the user asks to run a live grid bot, always suggest starting with --dry-run before going live — unless the user has already completed a dry run in the current session or explicitly says they want to skip it.

Example response:

Before going live, I'd recommend a dry run first to verify the grid setup:

revx strategy grid run BTC-USD --investment 500 --levels 10 --range 5 --dry-run

This simulates the bot without placing real orders. Want to start with a dry run?

If the user confirms they want to skip the dry run, proceed to the live confirmation flow above.

Missing Parameters — Always Ask, Never Guess

The --investment flag is required by the CLI, but also confirm the user's intent for all key parameters:

1. Symbol — which pair?
2. Investment — how much capital?
3. Levels — how many grid levels per side? (default 5 if user says "use defaults")
4. Range — what percentage range? (default 5% if user says "use defaults")

If the user says "run a grid bot on BTC", ask for the investment amount at minimum.

Run a live grid bot with real-time dashboard:

revx strategy grid run BTC-USD --investment 500
revx strategy grid run BTC-USD --levels 10 --range 5 --investment 1000 --interval 15
revx strategy grid run BTC-USD --investment 500 --split
revx strategy grid run BTC-USD --investment 100 --dry-run
revx strategy grid run BTC-USD --investment 500 --reset
revx strategy grid run BTC-USD --investment 1000 --trailing-up --stop-loss 85000

Ctrl+C for graceful shutdown (cancels open orders, prints summary).

The dashboard displays at most 24 grid rows in a price-centred window and reports how many higher and lower levels are hidden, so 100-level-per-side grids remain readable.

If Telegram connectors are configured (see revx-telegram skill), notifications are sent on startup, shutdown, fills, and P&L changes.

Long-Running Command — Behavioral Instructions for Claude

revx strategy grid run (including --dry-run) runs indefinitely as a continuous polling loop.

How to handle:

1. Run the command using the Bash tool with run_in_background: true — this frees Claude immediately while the process runs asynchronously
2. Periodically read the background task output file with the Read tool to monitor status and report key events to the user (orders placed, fills, errors)
3. If the user asks to stop, use the TaskStop tool with the task ID
4. Also print the command to the user so they can optionally run it in a separate terminal for the full live dashboard experience (with colors, real-time tables, Ctrl+C to stop)

Example — starting a grid bot:

Bash tool call:

{ "command": "revx strategy grid run BTC-USD --investment 500 --levels 10 --range 5", "run_in_background": true }

Response to user:

Started grid bot for BTC-USD in the background. I'll check for updates periodically.

If you'd like to see the live dashboard, run this in a separate terminal:

revx strategy grid run BTC-USD --investment 500 --levels 10 --range 5

Press Ctrl+C to stop (gracefully cancels open orders).

When to Suggest Split

When the user sets up a grid strategy (backtest, optimize, or run), ask whether they want split mode if they haven't specified --split. Present it as a simple choice with context:

Would you like to use split mode (--split)?

• Without split — all capital goes to buy orders below the current price. Best for uptrending markets where you expect price to dip into buy levels and bounce back.
• With split — capital is divided across both buy and sell levels. A market buy at the start price funds sell positions above. Best for ranging/sideways markets where price oscillates around the current level.

If the user is unsure, recommend running both variants in backtest/optimize to compare results.

Use --split consistently across backtest, optimize, dry-run, and live when the user has chosen split mode.

P&L Metrics

Realized P&L = sum of profit from each completed sell (sell revenue − cost per level). Measures pure grid trading profit. The initial split buy (if --split is used) does not affect this metric.

Total P&L = (final quote balance + final base × final price) − initial investment. The mark-to-market portfolio value change. No assets are force-sold at the end.

Without --split: only buy levels (below start price) are funded. In uptrending markets all grid cycles may complete, making Realized and Total P&L equal.

With --split: investment is divided across all levels. Levels above start price get positions via a simulated market buy at start price. This creates Realized/Total P&L divergence and allows profiting from both up and down moves within the grid.

Common Workflow: Backtest Then Run

# 1. Optimize to find best parameters
revx strategy grid optimize BTC-USD --investment 1000 --days 30

# 2. Backtest the top result
revx strategy grid backtest BTC-USD --levels 10 --range 7 --investment 1000

# 3. Dry run first
revx strategy grid run BTC-USD --investment 1000 --levels 10 --range 7 --dry-run

# 4. Go live
revx strategy grid run BTC-USD --investment 1000 --levels 10 --range 7

Use --split consistently across all steps if you want to test and run with split investment.

Related Skills