Mujoco

MuJoCo

A plausible render proves little by itself. Follow the physical chain from model through kinematics, actuation, contact, and observation.

Start from the model

• Read the MJCF and the pinned asset revision before adding control code. Check joint ranges, actuator limits, collision geometry, sites, masses, and the intended work surface.
• Prefer a maintained model from MuJoCo Menagerie, but verify it against the real robot and task envelope.
• Confirm gripper polarity, fingertip gap, and contact geometry empirically. Names and documentation can disagree with the model that actually runs.
• Use the current MuJoCo documentation for MJCF and Python APIs rather than carrying signatures forward from memory.

Follow the physical chain

• Kinematics: solve only for reachable targets and check the residual; damped least-squares can return a poor local solution without raising.
• Actuation: compare commanded position or torque with joint state, actuator force, range limits, and saturation.
• Contact: inspect which geoms belong to the gripper and object. Unnamed mesh geoms make name-only contact filters unsafe.
• Grasp: calibrate the grasp point, approach path, wrist orientation, and lift together. The end-effector site is not automatically the physical pinch point.
• Observation: make cameras and renderer lifecycle deterministic before using frames as training or regression data.

Go deeper only when needed

• For reachability, collision, grasp, saturation, and rendering symptoms, read FAILURES.md.
• For the measured SO-arm and macOS evidence from Robium's manipulation trial, read SO-ARM-MACOS.md. Preserve its numbers only with the stated model, scene, hardware, and renderer conditions.
• Use LeRobot guidance when the boundary reaches datasets, policies, or evaluation; use simulator-selection guidance when MuJoCo itself has not yet been chosen.

Done

• The intended workspace is reachable, commands produce the expected joint and contact state, grasps survive a lift across representative poses, and seeded resets produce acceptably stable observations.