Drawio

Draw.io Diagram Skill

Generate draw.io diagrams as native .drawio files. Optionally export to PNG, SVG, or PDF with the diagram XML embedded (so the exported file remains editable in draw.io).

How to create a diagram

1. Generate draw.io XML in mxGraphModel format for the requested diagram
2. Write the XML to a .drawio file in the current working directory using the Write tool
3. If the user requested an export format (png, svg, pdf), export using the draw.io CLI with --embed-diagram
4. Only after the export succeeds and the output file exists, delete the source .drawio file
5. Open the result — the exported file if exported, or the .drawio file otherwise

Choosing the output format

Check the user's request for a format preference. Examples:

• /drawio create a flowchart → flowchart.drawio
• /drawio png flowchart for login → login-flow.drawio.png
• /drawio svg: ER diagram → er-diagram.drawio.svg
• /drawio pdf architecture overview → architecture-overview.drawio.pdf

If no format is mentioned, just write the .drawio file and open it in draw.io. The user can always ask to export later.

Supported export formats

All three formats support --embed-diagram — the exported file contains the full diagram XML, so opening it in draw.io recovers the editable diagram.

draw.io CLI

The draw.io desktop app includes a command-line interface for exporting.

Locating the CLI

Try drawio first (works if on PATH), then fall back to the platform-specific path:

• macOS: /Applications/draw.io.app/Contents/MacOS/draw.io
• Linux: drawio (typically on PATH via snap/apt/flatpak)
• Windows: "C:\Program Files\draw.io\draw.io.exe"

Use which drawio (or where drawio on Windows) to check if it's on PATH before falling back.

Export command

drawio -x -f <format> -e -b 10 -o <output> <input.drawio>

Key flags:

• -x / --export: export mode
• -f / --format: output format (png, svg, pdf)
• -e / --embed-diagram: embed diagram XML in the output (PNG/SVG/PDF only)
• -o / --output: output file path
• -b / --border: border width around diagram (default: 0)
• -t / --transparent: transparent background (PNG only)
• -s / --scale: scale the diagram size
• --width / --height: fit into specified dimensions (preserves aspect ratio)
• -a / --all-pages: export all pages (PDF only)
• -p / --page-index: select a specific page (0-based)

Opening the result

• macOS: open <file>
• Linux: xdg-open <file>
• Windows: start <file>

File naming

• Use a descriptive filename based on the diagram content (e.g., login-flow, database-schema)
• Use lowercase with hyphens for multi-word names
• For export, use double extensions: name.drawio.png, name.drawio.svg, name.drawio.pdf — this signals the file contains embedded diagram XML
• After a successful export, delete the intermediate .drawio file — the exported file contains the full diagram

XML format

A .drawio file is XML. The formal schema uses an <mxfile> wrapper, but <mxGraphModel> alone also works and is simpler to generate. Always generate XML directly — Mermaid and CSV formats require server-side conversion and cannot be saved as native files.

Basic structure

Every diagram must have this structure:

<mxGraphModel>
  <root>
    <mxCell id="0"/>
    <mxCell id="1" parent="0"/>
    <!-- Diagram cells go here with parent="1" -->
  </root>
</mxGraphModel>

Note: draw.io's formal file format wraps this in <mxfile><diagram>...</diagram></mxfile>, but <mxGraphModel> alone is accepted by both the editor and CLI.

• Cell id="0" is the root layer
• Cell id="1" is the default parent layer
• All diagram elements use parent="1" unless using multiple layers

Common styles

Rounded rectangle:

<mxCell id="2" value="Label" style="rounded=1;whiteSpace=wrap;" vertex="1" parent="1">
  <mxGeometry x="100" y="100" width="120" height="60" as="geometry"/>
</mxCell>

Diamond (decision):

<mxCell id="3" value="Condition?" style="rhombus;whiteSpace=wrap;" vertex="1" parent="1">
  <mxGeometry x="100" y="200" width="120" height="80" as="geometry"/>
</mxCell>

Arrow (edge):

<mxCell id="4" value="" style="edgeStyle=orthogonalEdgeStyle;" edge="1" source="2" target="3" parent="1">
  <mxGeometry relative="1" as="geometry"/>
</mxCell>

Labeled arrow:

<mxCell id="5" value="Yes" style="edgeStyle=orthogonalEdgeStyle;" edge="1" source="3" target="6" parent="1">
  <mxGeometry relative="1" as="geometry"/>
</mxCell>

Useful style properties

Edge routing

draw.io does not have built-in collision detection for edges. Plan layout and routing carefully:

• Use edgeStyle=orthogonalEdgeStyle for right-angle connectors (most common)

• Space nodes generously — at least 60px apart, prefer 200px horizontal / 120px vertical gaps

• Use exitX/exitY and entryX/entryY (values 0-1) to control which side of a node an edge connects to. Spread connections across different sides to prevent overlap

• Leave room for arrowheads: The final straight segment of an edge (between the last bend and the target shape, or between the source shape and the first bend) must be long enough to fit the arrowhead. The default arrow size is 6px (configurable via startSize/endSize styles). If the final segment is too short, the arrowhead overlaps the bend and looks broken. Ensure at least 20px of straight segment before the target and after the source when placing waypoints or positioning nodes

• When using orthogonalEdgeStyle, the auto-router places bends automatically — if source and target are close together or nearly aligned on one axis, the router may place a bend very close to a shape, leaving no room for the arrow. Fix this by either increasing node spacing or adding explicit waypoints that keep the final segment long enough

• Add explicit waypoints when edges would overlap:

  <mxCell id="e1" style="edgeStyle=orthogonalEdgeStyle;" edge="1" parent="1" source="a" target="b">
    <mxGeometry relative="1" as="geometry">
      <Array as="points">
        <mxPoint x="300" y="150"/>
        <mxPoint x="300" y="250"/>
      </Array>
    </mxGeometry>
  </mxCell>
  

• Use rounded=1 on edges for cleaner bends

• Use jettySize=auto for better port spacing on orthogonal edges

• Align all nodes to a grid (multiples of 10)

Containers and groups

For architecture diagrams or any diagram with nested elements, use draw.io's proper parent-child containment — do not just place shapes on top of larger shapes.

How containment works

Set parent="containerId" on child cells. Children use relative coordinates within the container.

Container types

Key rules

• Always add pointerEvents=0; to container styles that should not capture connections being rewired between children
• Only omit pointerEvents=0 when the container itself needs to be connectable — in that case, use swimlane style which handles this correctly (the client area is transparent for mouse events while the header remains connectable)
• Children must set parent="containerId" and use coordinates relative to the container

Example: Architecture container with swimlane

<mxCell id="svc1" value="User Service" style="swimlane;startSize=30;fillColor=#dae8fc;strokeColor=#6c8ebf;" vertex="1" parent="1">
  <mxGeometry x="100" y="100" width="300" height="200" as="geometry"/>
</mxCell>
<mxCell id="api1" value="REST API" style="rounded=1;whiteSpace=wrap;" vertex="1" parent="svc1">
  <mxGeometry x="20" y="40" width="120" height="60" as="geometry"/>
</mxCell>
<mxCell id="db1" value="Database" style="shape=cylinder3;whiteSpace=wrap;" vertex="1" parent="svc1">
  <mxGeometry x="160" y="40" width="120" height="60" as="geometry"/>
</mxCell>

Example: Invisible group container

<mxCell id="grp1" value="" style="group;" vertex="1" parent="1">
  <mxGeometry x="100" y="100" width="300" height="200" as="geometry"/>
</mxCell>
<mxCell id="c1" value="Component A" style="rounded=1;whiteSpace=wrap;" vertex="1" parent="grp1">
  <mxGeometry x="10" y="10" width="120" height="60" as="geometry"/>
</mxCell>

Style reference

For the complete draw.io style reference: https://www.drawio.com/doc/faq/drawio-style-reference.html

For the XML Schema Definition (XSD): https://www.drawio.com/assets/mxfile.xsd

CRITICAL: XML well-formedness

• NEVER use double hyphens (--) inside XML comments. -- is illegal inside <!-- --> per the XML spec and causes parse errors. Use single hyphens or rephrase.
• Escape special characters in attribute values: &, <, >, "
• Always use unique id values for each mxCell