Replay Blackbox

replay-blackbox

Replay blackbox sensor data to flight controller (SITL or HITL)

⚠️ FIRMWARE MODIFICATION REQUIRED

This skill sends real GPS EPH and EPV values from blackbox logs.

Stock INAV hardcodes EPH=100cm and EPV=100cm. You must use modified INAV firmware that reads EPH/EPV from MSP_SIMULATOR packets.

Modified file: inav/src/main/fc/fc_msp.c (lines 4233-4260)

Rebuild SITL after modification:

cd ~/Documents/planes/inavflight/inav/build_sitl && cmake -DSITL=ON .. && make

Description

Replays GPS, accelerometer, gyro, barometer, and magnetometer data from a decoded blackbox log to a flight controller using MSP_SIMULATOR (HITL mode). This allows you to reproduce flight conditions in a controlled environment for debugging and testing.

Use Cases

• Debug navigation issues - Replay problematic flight data to reproduce bugs
• Test position estimator - Validate EPH calculations with real sensor data
• Validate firmware changes - Ensure fixes work with real flight conditions
• Reproduce oscillations - Debug GPS/EPH oscillation issues (Issue #11202)

How It Works

1. Loads decoded blackbox CSV data:
   • Main CSV (.01.csv): IMU, baro, mag at high rate (~100-1000 Hz)
   • GPS CSV (.01.gps.csv): GPS data at real update rate (~10 Hz)
2. Connects to FC via TCP (SITL) or serial (HITL)
3. Enables HITL mode via MSP_SIMULATOR
4. Replays sensor data at original timing (or faster/slower)
   • GPS preserved at real rate (not artificially repeated)
5. FC processes data as if sensors were real

Parameters

• Required:

  • --csv - Path to decoded blackbox CSV file

• Optional:

  • --port - Port to connect to (default: tcp:localhost:5761)
    • SITL: tcp:localhost:5761
    • HITL: /dev/ttyACM0 or /dev/ttyUSB0
  • --start-time - Start time in seconds (default: 0.0)
  • --duration - Duration in seconds (default: entire log)
  • --speed - Playback speed multiplier (default: 1.0)

Examples

Replay to SITL (Software In The Loop)

# Replay entire log
/replay-blackbox --csv blackbox.01.csv

# Replay specific time range
/replay-blackbox --csv blackbox.01.csv --start-time 10.0 --duration 30.0

# Replay at 2x speed
/replay-blackbox --csv blackbox.01.csv --speed 2.0

Replay to Physical FC (Hardware In The Loop)

# Replay to FC on /dev/ttyACM0
/replay-blackbox --csv blackbox.01.csv --port /dev/ttyACM0

# Replay specific section at half speed
/replay-blackbox --csv blackbox.01.csv --port /dev/ttyACM0 \
    --start-time 20.0 --duration 10.0 --speed 0.5

Workflow

1. Prepare Blackbox Data

First, decode your blackbox log to CSV:

~/Documents/planes/inavflight/blackbox-tools/obj/blackbox_decode flight.TXT
# Creates: flight.01.csv (main sensor data)
#          flight.01.gps.csv (GPS data at ~10 Hz)

2. Start Target (SITL or HITL)

For SITL:

cd ~/Documents/planes/inavflight/inav/build_sitl
./bin/SITL.elf &
sleep 3  # Wait for SITL to start

For HITL:

• Connect FC via USB
• Ensure FC is in normal mode (not CLI)
• FC will enter HITL mode automatically when receiving MSP_SIMULATOR

3. Replay Data

/replay-blackbox --csv flight.01.csv --port tcp:localhost:5761

4. Capture Results

For SITL:

# Download blackbox from SITL
ls -lt ~/*.TXT | head -1  # Find latest blackbox

# Decode it
blackbox_decode <sitl_log>.TXT

# Compare with original
# Check if issue reproduced

For HITL:

# Download blackbox via MSP
python3 claude/developer/scripts/testing/inav/gps/download_blackbox_from_fc.py --port /dev/ttyACM0

# Decode and analyze

Requirements

• mspapi2 - pip install mspapi2 or install from mspapi2/ directory
• Decoded blackbox CSV - Use blackbox_decode to create from .TXT

Troubleshooting

"Serial port is not open"

• For SITL: Ensure SITL is running on tcp:localhost:5761
• For HITL: Check serial port permissions and correct device name

"Could not enable HITL mode"

• Wait a few seconds after starting SITL
• For HITL: Ensure FC is not in CLI mode
• Check connection with: netstat -an | grep 5761 (SITL)

No GPS data in replay

• GPS data loaded from .gps.csv file (created by blackbox_decode)
• Check if file exists: ls flight.01.gps.csv
• Verify GPS data: head -5 flight.01.gps.csv
• Ensure GPS had fix during original flight
• Use --start-time to skip pre-GPS-lock period
• GPS sent at real rate (~10 Hz), not repeated at IMU rate

Replay too fast/slow

• Adjust with --speed parameter
• 1.0 = real-time, 2.0 = 2x speed, 0.5 = half speed

Technical Details

MSP_SIMULATOR Format

Uses MSP command 0x201F (MSP_SIMULATOR) with HITL mode flags:

• 0x0001 - HITL_ENABLE
• 0x0002 - HITL_HAS_NEW_GPS_DATA

Sends all sensor data:

• GPS: position, velocity, EPH, satellites, HDOP
  • Loaded from .gps.csv at real update rate (~10 Hz)
  • Not artificially repeated - preserves GPS timing
• IMU: accelerometer (milli-G), gyro (deg/s × 16)
• Baro: pressure (Pa)
• Mag: magnetometer (firmware divides by 20)

See: inav/src/main/fc/fc_msp.c:4160-4290

Field Conversions

See Also

• Tool: claude/developer/scripts/testing/inav/blackbox/analysis/replay_blackbox_to_fc.py
• Investigation: claude/developer/investigations/gps-fluctuation-issue-11202/
• HITL docs: INAV wiki - MSP_SIMULATOR
• Related: /build-sitl - Build SITL for testing

Notes

• FC attitude (roll/pitch/yaw) set to 0 to let FC calculate from IMU
• Sample rate preserved from original blackbox (typically 100-1000 Hz)
• GPS rate preserved at real update rate (~10 Hz from .gps.csv)
• Works with any blackbox log that has IMU data
• GPS data optional (will replay IMU-only if no .gps.csv file)