Sitl Arm

SITL Launch and Arm Guide

This guide covers launching INAV SITL and arming it via MSP protocol for automated testing.

Prerequisites

Building SITL

See the build-sitl skill for complete build instructions. Quick reference:

cd inav
mkdir -p build_sitl && cd build_sitl
cmake -DSITL=ON ..
make -j4

Python Dependencies

Recommended: mspapi2

cd mspapi2
pip3 install .

Or install directly from GitHub:

pip3 install git+https://github.com/xznhj8129/mspapi2

Quick Example (mspapi2):

from mspapi2 import MSPApi

# Connect to SITL
with MSPApi(tcp_endpoint="localhost:5760") as api:
    # Get status
    info, status = api.get_nav_status()
    print(f"Nav State: {status['navState']}")

    # Set RC channels (ARM on AUX1)
    api.set_rc_channels({
        "roll": 1500,
        "pitch": 1500,
        "throttle": 1000,
        "yaw": 1500,
        4: 2000  # AUX1 for ARM
    })

Documentation:

• mspapi2 Getting Started: mspapi2/docs/GETTING_STARTED.md
• Flight Computer Guide: mspapi2/docs/FLIGHT_COMPUTER.md (autonomous navigation)
• Discovering MSP Fields: mspapi2/docs/DISCOVERING_FIELDS.md

Alternative: uNAVlib (older)

pip3 install git+https://github.com/xznhj8129/uNAVlib

For new projects, prefer mspapi2. Existing scripts using uNAVlib will continue to work.

Launching SITL

cd inav/build_sitl

# Kill any existing instances
pkill -9 SITL.elf 2>/dev/null

# Remove old EEPROM for fresh config (optional)
rm -f eeprom.bin

# Launch in background
./bin/SITL.elf > /tmp/sitl.log 2>&1 &

# Wait for initialization (8-10 seconds)
sleep 10

# Verify running
pgrep -la SITL && ss -tlnp | grep 576

SITL TCP Ports

• Port 5760: UART1 (configurator)
• Port 5761: UART2 (testing scripts)

Arming SITL via MSP

Using the Test Script

python3 claude/developer/scripts/testing/inav/sitl/sitl_arm_test.py 5761

Manual Arming Steps

1. Set Receiver Type to MSP

MSP_SET_RX_CONFIG (code 45), set byte 23 to 2 (RX_TYPE_MSP).

2. Configure ARM Mode on AUX1

MSP_SET_MODE_RANGE (code 35):

# [slot, boxId, auxChannel, startStep, endStep]
payload = [0, 0, 0, 32, 48]  # ARM on AUX1, range 1700-2100

3. Save and Reboot

board.send_RAW_msg(250, data=[])  # MSP_EEPROM_WRITE
time.sleep(0.5)
board.send_RAW_msg(68, data=[])   # MSP_REBOOT
# Wait 15 seconds for restart

4. Enable HITL Mode (Bypass Sensor Calibration)

CRITICAL: Standalone SITL doesn't complete sensor calibration. Use MSP_SIMULATOR:

MSP_SIMULATOR = 0x201F
payload = [2, 1]  # [version, HITL_ENABLE]
board.send_RAW_msg(MSP_SIMULATOR, data=payload)

5. Send Continuous RC Data

CRITICAL: MSP receiver times out after 200ms. Send at 50Hz:

# AETR channel order (NOT AERT!)
# [Roll, Pitch, THROTTLE, Yaw, AUX1, ...]
channels = [1500, 1500, 1000, 1500, 2000, 1000, 1000, 1000] + [1500]*8
data = []
for ch in channels:
    data.extend([ch & 0xFF, (ch >> 8) & 0xFF])
board.send_RAW_msg(200, data=data)

# MUST consume response to prevent buffer overflow
dataHandler = board.receive_msg()

Key Technical Details

Channel Order

INAV uses rcmap {0, 1, 3, 2} (AETR):

• Raw 0 -> Roll
• Raw 1 -> Pitch
• Raw 2 -> THROTTLE (not Yaw!)
• Raw 3 -> Yaw (not Throttle!)

MSP_SET_RAW_RC expects: [Roll, Pitch, Throttle, Yaw, AUX1, ...]

MSP Response Handling

Always consume responses after MSP_SET_RAW_RC to prevent socket buffer overflow and MSP parser desync.

Arming Blockers

MSP Commands

Files

SITL Arming Scripts

All under claude/developer/scripts/testing/inav/sitl/:

• Basic arm (uNAVlib): arm_sitl.py - Simple arming script
• Full test (uNAVlib): sitl_arm_test.py - Complete test suite
• Configure for arming (mspapi2): configure_sitl_for_arming.py - Set up MSP receiver and ARM mode

Physical FC (not SITL)

These scripts live in the same sitl/ directory tree by convention but target real hardware over a serial port, not SITL over TCP — see the arm-fc-physical skill:

• arm_fc_physical.py - Quick MSP-arm smoke test via HITL (does not produce blackbox logs)
• configure_fc_msp_rx.py - Configure MSP receiver/ARM mode on a physical FC
• continuous_msp_rc_sender.py - Arm and hold a physical FC armed (does NOT use HITL, so blackbox logging works)

Project Documentation

• Project status: claude/projects/sitl-msp-arming/status.md

Source Code

• rcmap: src/main/rx/rx.c:114
• MSP_SIMULATOR: src/main/fc/fc_msp.c:4080-4160
• Arming flags: src/main/fc/runtime_config.h

Related Skills

• build-sitl - Building SITL firmware
• test-crsf-sitl - Testing CRSF telemetry with SITL
• run-configurator - Using INAV Configurator with SITL
• msp-protocol - MSP protocol reference (used for arming)