Cpp Mock Testing

Mock Testing

Instructions for AI coding agents on automating mock test creation using Google Mock (GMock) with consistent software testing patterns in this C++ project.

• 1. Benefits
• 2. Principles
  • 2.1. FIRST
• 3. Patterns
• 4. Workflow
• 5. Commands
• 6. Style Guide
• 7. Template
  • 7.1. File Header Template
  • 7.2. Mock Class Template
  • 7.3. Table-Driven Mock Test Template
  • 7.4. Sequence Verification Template
  • 7.5. Exception Testing Template
  • 7.6. NiceMock Template
• 8. References

1. Benefits

• Isolation

  Isolates the unit under test from external dependencies, ensuring tests focus on the specific component's behavior.

• Control

  Provides precise control over dependency behavior through expectations and return values, enabling thorough testing of edge cases and error conditions.

• Verification

  Automatically verifies that dependencies are called correctly with expected parameters and call counts.

• Flexibility

  Supports various testing scenarios including strict mocks, nice mocks, and sequence verification for complex interactions.

2. Principles

2.1. FIRST

The FIRST principles for mock testing focus on creating effective and maintainable tests.

• Fast

  Mock tests should execute quickly by replacing slow dependencies (network, file system, databases) with fast mock implementations to provide rapid feedback.

• Independent

  Each mock test should be self-contained with its own mock setup and not rely on the state or behavior of other tests.

• Repeatable

  Mock tests should produce deterministic results every time by controlling dependency behavior through expectations and return values.

• Self-Validating

  Mock tests should have clear pass/fail outcomes with automatic verification of mock expectations and assertion results.

• Timely

  Mock tests should be written alongside production code to validate the interaction contracts between components.

3. Patterns

• Mock Objects

  Simulated objects that mimic the behavior of real objects in controlled ways. They verify interactions between the unit under test and its dependencies.

• Interface Mocking

  Creating mock implementations of abstract interfaces or base classes to isolate the unit under test from concrete implementations.

• Behavior Verification

  Verifying that methods are called with expected arguments and in the correct order, rather than just checking return values.

• Return Value Stubbing

  Configuring mock objects to return specific values when their methods are called, allowing control over dependency behavior during tests.

• Exception Injection

  Using mocks to simulate error conditions by throwing exceptions, enabling tests to verify error handling logic.

4. Workflow

1. Identify Dependencies

   Identify interfaces or classes that need to be mocked (e.g., database connections, file systems, network services, external APIs).

2. Create Mock Classes

   Create mock classes for interfaces under test(s)/unit/<module>/ using GMock's MOCK_METHOD macro.

3. Register with CMake

   Add the test file to test(s)/unit/<module>/CMakeLists.txt using meta_gtest() with WITH_GMOCK option.

   meta_gtest(
     WITH_GMOCK
     TARGET ${PROJECT_NAME}-test
     SOURCES
       <header>_test.cpp
   )
   

4. Define Expectations

   Set up expectations using EXPECT_CALL to specify:

   • Which methods should be called
   • Expected arguments (using matchers)
   • Call frequency (Times, AtLeast, AtMost, etc.)
   • Return values or actions

5. Test Coverage Requirements

   Include comprehensive scenarios:

   • Normal operation with mocked dependencies
   • Error conditions (exceptions, null returns, invalid data)
   • Boundary conditions in dependency interactions
   • Sequence of calls to multiple dependencies
   • Concurrent access scenarios when applicable

6. Apply Templates

   Structure all tests using the template pattern below.

5. Commands

6. Style Guide

• Test Framework

  Use Google Mock (GMock) framework via #include <gmock/gmock.h> and #include <gtest/gtest.h>.

• Mock Class Definition

  Define mock classes inheriting from the interface to be mocked. Use MOCK_METHOD macro with proper method signature, including const qualifiers and override specifiers.

• Include Headers

  GMock/GTest headers are listed first in mock test files as a convention to clearly identify the file as a test file using the GMock framework.

  Include necessary headers in this order:

  1. GMock/GTest headers (<gmock/gmock.h>, <gtest/gtest.h>)
  2. Standard library headers (<memory>, <string>, etc.)
  3. Project interface headers
  4. Project implementation headers

• Namespace

  Use using namespace <namespace>; and using namespace ::testing; for convenience within test functions to access GMock matchers and actions.

• Test Organization

  Use table-driven testing for multiple scenarios with the same mock setup. Each TEST or TEST_F should focus on one aspect of the interaction with mocked dependencies.

• Mock Types

  • NiceMock

    Ignores unexpected calls (use for non-critical dependencies)

  • StrictMock

    Fails on any unexpected calls (use for strict verification)

  • Default Mock

    Warns on unexpected calls (balanced approach)

• Expectations

  • Use EXPECT_CALL to set up expectations before exercising the unit under test
  • Chain matchers with .With(), .WillOnce(), .WillRepeatedly(), .Times()
  • Prefer specific matchers (Eq(), Gt(), _) over generic ones when possible

• Matchers and Actions

  • Use built-in matchers: _ (anything), Eq(), Ne(), Lt(), Gt(), Le(), Ge(), IsNull(), NotNull()
  • Container matchers: IsEmpty(), SizeIs(), Contains(), ElementsAre()
  • String matchers: StartsWith(), EndsWith(), HasSubstr(), MatchesRegex()
  • Use Return(), ReturnRef(), Throw(), DoAll(), Invoke() for actions

• Sequence Verification

  Use InSequence or Sequence objects when call order matters.

• Traceability

  Employ SCOPED_TRACE(tc.label) for traceable failures in table-driven mock tests.

• Assertions

  Use EXPECT_* macros to allow all test cases to run. Mock expectations are automatically verified at the end of each test.

7. Template

Use these templates for new mock tests. Replace placeholders with actual values.

7.1. File Header Template

#include <gmock/gmock.h>
#include <gtest/gtest.h>

#include <memory>
#include <string>
#include <vector>

#include "<module>/<interface>.hpp"
#include "<module>/<implementation>.hpp"

using namespace <namespace>;
using namespace ::testing;

7.2. Mock Class Template

/**
 * @brief Mock implementation of <Interface> for testing.
 */
class Mock<Interface> : public <Interface>
{
public:
  MOCK_METHOD(<return_type>, <method_name>, (<param_types>), (override));
  MOCK_METHOD(<return_type>, <method_name2>, (<param_types>), (const, override));
};

7.3. Table-Driven Mock Test Template

TEST(<Module>Test, <FunctionName>WithMock)
{
  // In-Got-Want
  struct Tests
  {
    std::string label;

    struct In
    {
      /* input types and names */
    } in;

    struct Want
    {
      <output_type> expected;     // expected output type(s) and name(s)
      /* expected mock call parameters and behavior */
      <size_t> call_count;        // number of times method should be called
      <return_type> return_value; // value mock should return
      <param_type> param;         // expected parameter value(s)
    } want;
  };

  // Table-Driven Testing
  const std::vector<Tests> tests = {
    {
      "case-description-1", 
      /* in */ {/* input values */}, 
      /* want */ {/* expected */, /* call_count */ 1, /* return_value */ {}, /* param */ {}}
    },
    {
      "case-description-2", 
      /* in */ {/* input values */}, 
      /* want */ {/* expected */, /* call_count */ 1, /* return_value */ {}, /* param */ {}}
    },
    // add more cases as needed
  };

  for (const auto &tc : tests)
  {
    SCOPED_TRACE(tc.label);

    // Arrange
    auto mock_dependency = std::make_shared<Mock<Interface>>();

    EXPECT_CALL(*mock_dependency, <method_name>(tc.want.param))
        .Times(tc.want.call_count)
        .WillOnce(Return(tc.want.return_value));

    <Implementation> object(mock_dependency);

    // Act
    auto got = object.<function>(tc.in.<input>);

    // Assert
    EXPECT_EQ(got, tc.want.expected);
  }
}

7.4. Sequence Verification Template

TEST(<Module>Test, <FunctionName>WithSequence)
{
  // Arrange
  auto mock_dependency = std::make_shared<StrictMock<Mock<Interface>>>();

  InSequence seq;
  EXPECT_CALL(*mock_dependency, <method1>(_)).WillOnce(Return(<value1>));
  EXPECT_CALL(*mock_dependency, <method2>(_)).WillOnce(Return(<value2>));

  <Implementation> object(mock_dependency);

  // Act
  auto got = object.<function>();

  // Assert
  EXPECT_EQ(got, <expected>);
}

7.5. Exception Testing Template

TEST(<Module>Test, <FunctionName>ThrowsOnError)
{
  // Arrange
  auto mock_dependency = std::make_shared<Mock<Interface>>();

  EXPECT_CALL(*mock_dependency, <method_name>(_))
      .WillOnce(Throw(std::runtime_error("error message")));

  <Implementation> object(mock_dependency);

  // Act & Assert
  EXPECT_THROW(object.<function>(), std::runtime_error);
}

7.6. NiceMock Template

TEST(<Module>Test, <FunctionName>WithNiceMock)
{
  // Arrange
  auto mock_dependency = std::make_shared<NiceMock<Mock<Interface>>>();

  ON_CALL(*mock_dependency, <method_name>(_))
      .WillByDefault(Return(<default_value>));

  EXPECT_CALL(*mock_dependency, <critical_method>(_))
      .Times(1)
      .WillOnce(Return(<value>));

  <Implementation> object(mock_dependency);

  // Act
  auto got = object.<function>();

  // Assert
  EXPECT_EQ(got, <expected>);
}

8. References

• GoogleTest Mocking for Dummies guide.
• GoogleTest Mocking Cookbook guide.
• GoogleTest Mocking Cheat Sheet guide.