Setup Browser Cookies

Preamble (run first)

_ROOT=$(git rev-parse --show-toplevel 2>/dev/null)
GSTACK_ROOT="$HOME/.codex/skills/gstack"
[ -n "$_ROOT" ] && [ -d "$_ROOT/.agents/skills/gstack" ] && GSTACK_ROOT="$_ROOT/.agents/skills/gstack"
GSTACK_BIN="$GSTACK_ROOT/bin"
GSTACK_BROWSE="$GSTACK_ROOT/browse/dist"
GSTACK_DESIGN="$GSTACK_ROOT/design/dist"
_UPD=$($GSTACK_BIN/gstack-update-check 2>/dev/null || .agents/skills/gstack/bin/gstack-update-check 2>/dev/null || true)
[ -n "$_UPD" ] && echo "$_UPD" || true
mkdir -p ~/.gstack/sessions
touch ~/.gstack/sessions/"$PPID"
_SESSIONS=$(find ~/.gstack/sessions -mmin -120 -type f 2>/dev/null | wc -l | tr -d ' ')
find ~/.gstack/sessions -mmin +120 -type f -delete 2>/dev/null || true
_CONTRIB=$($GSTACK_BIN/gstack-config get gstack_contributor 2>/dev/null || true)
_PROACTIVE=$($GSTACK_BIN/gstack-config get proactive 2>/dev/null || echo "true")
_PROACTIVE_PROMPTED=$([ -f ~/.gstack/.proactive-prompted ] && echo "yes" || echo "no")
_BRANCH=$(git branch --show-current 2>/dev/null || echo "unknown")
echo "BRANCH: $_BRANCH"
_SKILL_PREFIX=$($GSTACK_BIN/gstack-config get skill_prefix 2>/dev/null || echo "false")
echo "PROACTIVE: $_PROACTIVE"
echo "PROACTIVE_PROMPTED: $_PROACTIVE_PROMPTED"
echo "SKILL_PREFIX: $_SKILL_PREFIX"
source <($GSTACK_BIN/gstack-repo-mode 2>/dev/null) || true
REPO_MODE=${REPO_MODE:-unknown}
echo "REPO_MODE: $REPO_MODE"
_LAKE_SEEN=$([ -f ~/.gstack/.completeness-intro-seen ] && echo "yes" || echo "no")
echo "LAKE_INTRO: $_LAKE_SEEN"
_TEL=$($GSTACK_BIN/gstack-config get telemetry 2>/dev/null || true)
_TEL_PROMPTED=$([ -f ~/.gstack/.telemetry-prompted ] && echo "yes" || echo "no")
_TEL_START=$(date +%s)
_SESSION_ID="$$-$(date +%s)"
echo "TELEMETRY: ${_TEL:-off}"
echo "TEL_PROMPTED: $_TEL_PROMPTED"
mkdir -p ~/.gstack/analytics
echo '{"skill":"setup-browser-cookies","ts":"'$(date -u +%Y-%m-%dT%H:%M:%SZ)'","repo":"'$(basename "$(git rev-parse --show-toplevel 2>/dev/null)" 2>/dev/null || echo "unknown")'"}'  >> ~/.gstack/analytics/skill-usage.jsonl 2>/dev/null || true
# zsh-compatible: use find instead of glob to avoid NOMATCH error
for _PF in $(find ~/.gstack/analytics -maxdepth 1 -name '.pending-*' 2>/dev/null); do
  if [ -f "$_PF" ]; then
    if [ "$_TEL" != "off" ] && [ -x "$GSTACK_BIN/gstack-telemetry-log" ]; then
      $GSTACK_BIN/gstack-telemetry-log --event-type skill_run --skill _pending_finalize --outcome unknown --session-id "$_SESSION_ID" 2>/dev/null || true
    fi
    rm -f "$_PF" 2>/dev/null || true
  fi
  break
done
# Learnings count
eval "$($GSTACK_BIN/gstack-slug 2>/dev/null)" 2>/dev/null || true
_LEARN_FILE="${GSTACK_HOME:-$HOME/.gstack}/projects/${SLUG:-unknown}/learnings.jsonl"
if [ -f "$_LEARN_FILE" ]; then
  _LEARN_COUNT=$(wc -l < "$_LEARN_FILE" 2>/dev/null | tr -d ' ')
  echo "LEARNINGS: $_LEARN_COUNT entries loaded"
else
  echo "LEARNINGS: 0"
fi

If PROACTIVE is "false", do not proactively suggest gstack skills AND do not auto-invoke skills based on conversation context. Only run skills the user explicitly types (e.g., /qa, /ship). If you would have auto-invoked a skill, instead briefly say: "I think /skillname might help here — want me to run it?" and wait for confirmation. The user opted out of proactive behavior.

If SKILL_PREFIX is "true", the user has namespaced skill names. When suggesting or invoking other gstack skills, use the /gstack- prefix (e.g., /gstack-qa instead of /qa, /gstack-ship instead of /ship). Disk paths are unaffected — always use $GSTACK_ROOT/[skill-name]/SKILL.md for reading skill files.

If output shows UPGRADE_AVAILABLE <old> <new>: read $GSTACK_ROOT/gstack-upgrade/SKILL.md and follow the "Inline upgrade flow" (auto-upgrade if configured, otherwise AskUserQuestion with 4 options, write snooze state if declined). If JUST_UPGRADED <from> <to>: tell user "Running gstack v{to} (just updated!)" and continue.

If LAKE_INTRO is no: Before continuing, introduce the Completeness Principle. Tell the user: "gstack follows the Boil the Lake principle — always do the complete thing when AI makes the marginal cost near-zero. Read more: https://garryslist.org/posts/boil-the-ocean" Then offer to open the essay in their default browser:

open https://garryslist.org/posts/boil-the-ocean
touch ~/.gstack/.completeness-intro-seen

Only run open if the user says yes. Always run touch to mark as seen. This only happens once.

If TEL_PROMPTED is no AND LAKE_INTRO is yes: After the lake intro is handled, ask the user about telemetry. Use AskUserQuestion:

Help gstack get better! Community mode shares usage data (which skills you use, how long they take, crash info) with a stable device ID so we can track trends and fix bugs faster. No code, file paths, or repo names are ever sent. Change anytime with gstack-config set telemetry off.

Options:

• A) Help gstack get better! (recommended)
• B) No thanks

If A: run $GSTACK_BIN/gstack-config set telemetry community

If B: ask a follow-up AskUserQuestion:

How about anonymous mode? We just learn that someone used gstack — no unique ID, no way to connect sessions. Just a counter that helps us know if anyone's out there.

Options:

• A) Sure, anonymous is fine
• B) No thanks, fully off

If B→A: run $GSTACK_BIN/gstack-config set telemetry anonymous If B→B: run $GSTACK_BIN/gstack-config set telemetry off

Always run:

touch ~/.gstack/.telemetry-prompted

This only happens once. If TEL_PROMPTED is yes, skip this entirely.

If PROACTIVE_PROMPTED is no AND TEL_PROMPTED is yes: After telemetry is handled, ask the user about proactive behavior. Use AskUserQuestion:

gstack can proactively figure out when you might need a skill while you work — like suggesting /qa when you say "does this work?" or /investigate when you hit a bug. We recommend keeping this on — it speeds up every part of your workflow.

Options:

• A) Keep it on (recommended)
• B) Turn it off — I'll type /commands myself

If A: run $GSTACK_BIN/gstack-config set proactive true If B: run $GSTACK_BIN/gstack-config set proactive false

Always run:

touch ~/.gstack/.proactive-prompted

This only happens once. If PROACTIVE_PROMPTED is yes, skip this entirely.

Voice

Tone: direct, concrete, sharp, never corporate, never academic. Sound like a builder, not a consultant. Name the file, the function, the command. No filler, no throat-clearing.

Writing rules: No em dashes (use commas, periods, "..."). No AI vocabulary (delve, crucial, robust, comprehensive, nuanced, etc.). Short paragraphs. End with what to do.

The user always has context you don't. Cross-model agreement is a recommendation, not a decision — the user decides.

Contributor Mode

If _CONTRIB is true: you are in contributor mode. At the end of each major workflow step, rate your gstack experience 0-10. If not a 10 and there's an actionable bug or improvement — file a field report.

File only: gstack tooling bugs where the input was reasonable but gstack failed. Skip: user app bugs, network errors, auth failures on user's site.

To file: write ~/.gstack/contributor-logs/{slug}.md:

# {Title}
**What I tried:** {action} | **What happened:** {result} | **Rating:** {0-10}
## Repro
1. {step}
## What would make this a 10
{one sentence}
**Date:** {YYYY-MM-DD} | **Version:** {version} | **Skill:** /{skill}

Slug: lowercase hyphens, max 60 chars. Skip if exists. Max 3/session. File inline, don't stop.

Completion Status Protocol

When completing a skill workflow, report status using one of:

• DONE — All steps completed successfully. Evidence provided for each claim.
• DONE_WITH_CONCERNS — Completed, but with issues the user should know about. List each concern.
• BLOCKED — Cannot proceed. State what is blocking and what was tried.
• NEEDS_CONTEXT — Missing information required to continue. State exactly what you need.

Escalation

It is always OK to stop and say "this is too hard for me" or "I'm not confident in this result."

Bad work is worse than no work. You will not be penalized for escalating.

• If you have attempted a task 3 times without success, STOP and escalate.
• If you are uncertain about a security-sensitive change, STOP and escalate.
• If the scope of work exceeds what you can verify, STOP and escalate.

Escalation format:

STATUS: BLOCKED | NEEDS_CONTEXT
REASON: [1-2 sentences]
ATTEMPTED: [what you tried]
RECOMMENDATION: [what the user should do next]

Telemetry (run last)

After the skill workflow completes (success, error, or abort), log the telemetry event. Determine the skill name from the name: field in this file's YAML frontmatter. Determine the outcome from the workflow result (success if completed normally, error if it failed, abort if the user interrupted).

PLAN MODE EXCEPTION — ALWAYS RUN: This command writes telemetry to ~/.gstack/analytics/ (user config directory, not project files). The skill preamble already writes to the same directory — this is the same pattern. Skipping this command loses session duration and outcome data.

Run this bash:

_TEL_END=$(date +%s)
_TEL_DUR=$(( _TEL_END - _TEL_START ))
rm -f ~/.gstack/analytics/.pending-"$_SESSION_ID" 2>/dev/null || true
# Local analytics (always available, no binary needed)
echo '{"skill":"SKILL_NAME","duration_s":"'"$_TEL_DUR"'","outcome":"OUTCOME","browse":"USED_BROWSE","session":"'"$_SESSION_ID"'","ts":"'$(date -u +%Y-%m-%dT%H:%M:%SZ)'"}' >> ~/.gstack/analytics/skill-usage.jsonl 2>/dev/null || true
# Remote telemetry (opt-in, requires binary)
if [ "$_TEL" != "off" ] && [ -x $GSTACK_ROOT/bin/gstack-telemetry-log ]; then
  $GSTACK_ROOT/bin/gstack-telemetry-log \
    --skill "SKILL_NAME" --duration "$_TEL_DUR" --outcome "OUTCOME" \
    --used-browse "USED_BROWSE" --session-id "$_SESSION_ID" 2>/dev/null &
fi

Replace SKILL_NAME with the actual skill name from frontmatter, OUTCOME with success/error/abort, and USED_BROWSE with true/false based on whether $B was used. If you cannot determine the outcome, use "unknown". The local JSONL always logs. The remote binary only runs if telemetry is not off and the binary exists.

Plan Status Footer

When you are in plan mode and about to call ExitPlanMode:

1. Check if the plan file already has a ## GSTACK REVIEW REPORT section.
2. If it DOES — skip (a review skill already wrote a richer report).
3. If it does NOT — run this command:

```bash $GSTACK_ROOT/bin/gstack-review-read ```

Then write a ## GSTACK REVIEW REPORT section to the end of the plan file:

• If the output contains review entries (JSONL lines before ---CONFIG---): format the standard report table with runs/status/findings per skill, same format as the review skills use.
• If the output is NO_REVIEWS or empty: write this placeholder table:

```markdown

GSTACK REVIEW REPORT

VERDICT: NO REVIEWS YET — run `/autoplan` for full review pipeline, or individual reviews above. ```

PLAN MODE EXCEPTION — ALWAYS RUN: This writes to the plan file, which is the one file you are allowed to edit in plan mode. The plan file review report is part of the plan's living status.

Setup Browser Cookies

Import logged-in sessions from your real Chromium browser into the headless browse session.

CDP mode check

First, check if browse is already connected to the user's real browser:

$B status 2>/dev/null | grep -q "Mode: cdp" && echo "CDP_MODE=true" || echo "CDP_MODE=false"

If CDP_MODE=true: tell the user "Not needed — you're connected to your real browser via CDP. Your cookies and sessions are already available." and stop. No cookie import needed.

How it works

1. Find the browse binary
2. Run cookie-import-browser to detect installed browsers and open the picker UI
3. User selects which cookie domains to import in their browser
4. Cookies are decrypted and loaded into the Playwright session

Steps

1. Find the browse binary

SETUP (run this check BEFORE any browse command)

_ROOT=$(git rev-parse --show-toplevel 2>/dev/null)
B=""
[ -n "$_ROOT" ] && [ -x "$_ROOT/.agents/skills/gstack/browse/dist/browse" ] && B="$_ROOT/.agents/skills/gstack/browse/dist/browse"
[ -z "$B" ] && B=$GSTACK_BROWSE/browse
if [ -x "$B" ]; then
  echo "READY: $B"
else
  echo "NEEDS_SETUP"
fi

If NEEDS_SETUP:

1. Tell the user: "gstack browse needs a one-time build (~10 seconds). OK to proceed?" Then STOP and wait.
2. Run: cd <SKILL_DIR> && ./setup
3. If bun is not installed:

   if ! command -v bun >/dev/null 2>&1; then
     curl -fsSL https://bun.sh/install | BUN_VERSION=1.3.10 bash
   fi
   

2. Open the cookie picker

$B cookie-import-browser

This auto-detects installed Chromium browsers and opens an interactive picker UI in your default browser where you can:

• Switch between installed browsers
• Search domains
• Click "+" to import a domain's cookies
• Click trash to remove imported cookies

Tell the user: "Cookie picker opened — select the domains you want to import in your browser, then tell me when you're done."

3. Direct import (alternative)

If the user specifies a domain directly (e.g., /setup-browser-cookies github.com), skip the UI:

$B cookie-import-browser comet --domain github.com

Replace comet with the appropriate browser if specified.

4. Verify

After the user confirms they're done:

$B cookies

Show the user a summary of imported cookies (domain counts).

Notes

• On macOS, the first import per browser may trigger a Keychain dialog — click "Allow" / "Always Allow"
• On Linux, v11 cookies may require secret-tool/libsecret access; v10 cookies use Chromium's standard fallback key
• Cookie picker is served on the same port as the browse server (no extra process)
• Only domain names and cookie counts are shown in the UI — no cookie values are exposed
• The browse session persists cookies between commands, so imported cookies work immediately