Kubernetes Basics

Kubernetes Basics

The gap between a manifest that runs and one that is production-ready is exactly the fields people omit: no resource requests means the scheduler packs pods blind and the node OOMs; no readiness probe means every rollout routes traffic to cold pods and users see 502s; no PodDisruptionBudget means a routine node drain takes the whole service down. This skill produces manifests where every one of those fields is set deliberately.

Core objects

• Deployment: manages replica Pods and rolling updates.
• Service: stable network endpoint for a set of Pods.
• ConfigMap/Secret: configuration and credentials, injected as env vars or files.
• Ingress: HTTP routing into the cluster.

Operating procedure

Step 1: Gather inputs

1. The container image and its listening port; whether an HTTP health endpoint exists (if not, add one before writing probes).
2. Observed resource usage - idle and p95 CPU/memory from staging or a load test. If unmeasured, label the numbers guesses, start at requests of 100m CPU / 128Mi memory, and revisit after a week of real metrics.
3. Startup time - seconds from process start to serving. This drives probe timing.
4. Traffic profile - steady or bursty - and availability requirement, which set replicas and the PodDisruptionBudget.
5. Shutdown behavior - does the app handle SIGTERM and drain in-flight requests?

Step 2: Set resources with the right asymmetry

• Requests = what the scheduler reserves. Set them to observed p95 usage. Too low and the node overcommits; too high and you pay for idle reservation.
• Memory limit: set it, at roughly 1.5-2x the request. Exceeding it is an OOMKill - so a limit tight against real usage is a restart loop.
• CPU limit: unlike memory, exceeding it only throttles. Either omit the CPU limit (let bursts use idle node CPU) or set it 3-5x the request; a tight CPU limit silently adds latency through throttling.
• Never omit requests: without them the scheduler cannot place pods sensibly and one greedy pod starves the node.

Step 3: Configure the three probes

• Readiness: gates traffic. Point it at an endpoint that confirms the pod can serve (dependencies reachable). Without it, rollouts send requests to pods that have not warmed up.
• Liveness: restarts a hung process. Keep it cheap and dependency-free - a liveness probe that checks the database converts a database blip into a cluster-wide restart storm.
• Startup: for slow-booting apps, so liveness does not kill a pod mid-boot. Budget: failureThreshold x periodSeconds must exceed worst-case startup (e.g. 30 x 10s = 5 minutes of grace).

Defaults that work for a typical HTTP service: readiness every 5s with 3 failures to unready; liveness every 10s with 3 failures to restart.

Step 4: Write the Deployment

apiVersion: apps/v1
kind: Deployment
metadata: { name: api }
spec:
  replicas: 3
  strategy:
    rollingUpdate: { maxUnavailable: 0, maxSurge: 1 }
  selector: { matchLabels: { app: api } }
  template:
    metadata: { labels: { app: api } }
    spec:
      terminationGracePeriodSeconds: 30
      containers:
        - name: api
          image: registry/api:1.4.2          # immutable tag, never :latest
          resources:
            requests: { cpu: "100m", memory: "128Mi" }
            limits:   { memory: "256Mi" }    # CPU limit deliberately omitted
          readinessProbe:
            httpGet: { path: /healthz, port: 8080 }
            initialDelaySeconds: 5
            periodSeconds: 5
          livenessProbe:
            httpGet: { path: /livez, port: 8080 }
            periodSeconds: 10
          lifecycle:
            preStop:
              exec: { command: ["sleep", "5"] }   # let endpoint removal propagate
---
apiVersion: policy/v1
kind: PodDisruptionBudget
metadata: { name: api-pdb }
spec:
  minAvailable: 2
  selector: { matchLabels: { app: api } }

Step 5: Make rollouts and shutdown zero-downtime

• replicas >= 2 always, plus the PodDisruptionBudget, so node drains and rollouts never hit zero.
• maxUnavailable: 0, maxSurge: 1 for a capacity-safe rolling update; loosen only when spare capacity is proven.
• Graceful shutdown sequence: SIGTERM arrives, the preStop sleep (about 5s) holds the process alive while the endpoint removal propagates to load balancers, the app drains in-flight requests, and everything completes inside terminationGracePeriodSeconds (default 30s - raise it for long requests).
• ConfigMap changes do not restart pods. Roll the deployment or embed a checksum annotation on the pod template so config changes trigger a rollout.

Step 6: Handle configuration and secrets

• Pin image tags by digest or immutable version; :latest makes rollbacks meaningless and deploys non-reproducible.
• Secrets live in a Secret (or an external secrets manager), never in the image or a ConfigMap.
• Apply declaratively via GitOps; kubectl edit in production creates drift no one can reconstruct.

Worked contrast

Bad - runs fine in dev, fails on the first real deploy:

containers:
  - name: api
    image: registry/api:latest    # unpinned: rollback impossible
    # no resources: scheduler packs blind, node OOMs under load
    # no readiness: rollout routes traffic to cold pods -> 502s
    # no PDB, replicas: 1        # node drain = outage

Every omission above maps to a named incident: OOMKilled neighbors, deploy-time 502s, drain-time downtime, and an unreproducible "what was running yesterday?"

Good: the Step 4 manifest - same app, each field closing one of those incidents.

Deliverable

Produce a manifest set containing: the Deployment with requests/limits justified by measured (or explicitly guessed) usage, all applicable probes with timing arithmetic shown, an immutable image reference, the PodDisruptionBudget, the Service, and a one-paragraph shutdown-path note confirming SIGTERM handling and the preStop/grace-period budget.

Do NOT

• Do not ship without resource requests - this is the root cause behind most "Kubernetes is flaky" complaints.
• Do not set a tight CPU limit by reflex; throttling is invisible latency. Memory is the limit that must exist.
• Do not point liveness at dependencies - restarts don't fix a down database, they amplify it.
• Do not use :latest or mutable tags in production.
• Do not run a single replica of anything availability matters for, and do not skip the PodDisruptionBudget.
• Do not assume ConfigMap edits reach running pods - they do not, until pods restart.

Quality bar

• Every container has requests; memory has a limit; the CPU-limit decision is stated, not defaulted.
• Probe timing arithmetic covers worst-case startup, and liveness has no external dependencies.
• Rollout strategy plus PDB guarantee the service never drops below stated capacity during deploys and drains.
• Image reference is immutable; secrets are not in ConfigMaps or images.
• Shutdown path is verified: endpoint removal precedes process exit.

Escalation

Autoscaling (HPA), multi-cluster, and service-mesh design are beyond a basics pass - flag them rather than improvising. Route deploy pipelines to github-actions, cluster provisioning to terraform-expert, and telemetry for the probes' /healthz endpoints to observability-stack.