Migrate to Codex
Autonomy
Keep going until the selected migration is completely done: run the migrator, inspect the report, fix migrated Codex instructions/skills/agents/MCP config, and re-run checks. For new artifacts within a clearly selected target (AGENTS.md, .codex/, .agents/, or ~/.codex/), proceed without redundant confirmation where the user's authorization and higher-priority approval rules permit. Before destructive replacement or deletion, or changes to existing files outside the explicitly agreed set, obtain confirmation and follow all applicable higher-priority approval rules. Preserve unrelated existing Codex config entries in .codex/config.toml or ~/.codex/config.toml, such as notify, projects, marketplaces, or unrelated MCP servers; seek confirmation if they fail validation or directly conflict with the migration. Do not edit source Claude Code files (.claude/, ~/.claude/, .mcp.json, or .claude.json), unrelated project code, secrets, or another repository.
Migration Order
Run the migration in this order for each selected global or project source:
Start by using the available TODO/task list tool. Do not create MIGRATION_TODOS.md or any TODO file unless the user explicitly asks. In DSH, todo_write takes a todos array whose items each have content and status; use statuses pending, in_progress, and completed. In another runtime, check its current tool schema instead of assuming the same API. Make the TODOs specific to the selected artifacts. Before finishing, update the TODO list so every finished step is marked completed and no step remains in_progress. Use literal source → Codex target labels, for example:
- Inspect
.claude/commands → Codex skills/prompts
- Inspect
.claude/agents → .codex/agents
- Inspect
.mcp.json → .codex/config.toml MCP servers
- Inspect
.claude/settings.json hooks → .codex/hooks.json
- Migrate safe selected artifacts → Codex files
- Validate generated
.codex/config.toml
- Validate generated
.codex/agents
- Report migrated artifacts and manual-review items
Read references/differences.md (and refresh Codex docs if its Docs last checked date is old).
Scan and inspect before writing:
--scan-only lists active and inactive source surfaces.
--plan prints staged Codex artifact paths and report rows.
--doctor summarizes readiness, manual-review work, and validation risks.
Convert surfaces in the same order the CLI uses:
- instructions:
CLAUDE.md / AGENTS.md to AGENTS.md
- plugins: report Claude plugin trees and marketplaces as manual migration work
- hooks: rewrite supported Claude hooks into
.codex/hooks.json and enable [features].codex_hooks = true
- skills and commands: write Codex skills under
.agents/skills/
- config: write
.codex/config.toml from Claude model/sandbox settings and MCP servers, including personality = "friendly" when config is generated
- subagents: write Codex custom agents under
.codex/agents/
Dry-run, then write the selected target. Use --replace only when orphan generated skills or agents should be deleted.
Inspect the terminal output and .codex/migrate-to-codex-report.txt after real runs.
Review generated artifacts in this order: AGENTS.md, .agents/skills/, .codex/config.toml, .codex/hooks.json, .codex/agents/, then report-only plugin items.
Run --validate-target against each target after edits.
Re-run checks and --dry-run after edits.
Return the final migration report as one markdown table per scope that has rows. The tables cover only the non-native follow-up migration work you performed, such as skills created from slash commands, subagents, MCP servers, hooks, unsupported/local plugin notes, and manual-review caveats. Include programmatic native import rows for config, instructions, skills, or supported plugins only if you personally migrated them in this follow-up run.
If only one scope has rows, render only the table with no heading. If multiple scopes have rows, render one heading before each table. Use **User Config** for user-scope rows. For project-scope rows, use the actual project folder name as the heading, for example **northstar-support-portal**; do not use Current Project as the heading. Do not add prose before or after the table output.
Use exactly these columns:
northstar-support-portal
| Status |
Item |
Notes |
Added |
Slash command pr-review |
Converted into a Codex skill |
Added |
Subagent release-lead |
Added as a Codex subagent |
Check before using |
Hook PreToolUse |
Converted, but some Claude hook behavior differs in Codex |
Not Added |
Hook Notification |
Codex does not have an equivalent notification hook |
Not Added |
Plugin team-macros |
Plugin needs manual setup |
Status must be Added, Check before using, or Not Added. Use Added when a Codex-facing artifact was created or changed and needs no special review. Use Check before using when a Codex-facing artifact was created or changed but the migration changed semantics, inferred behavior, preserved tool rules as guidance, or dropped unsupported behavior. Use Not Added when a source artifact was detected but no Codex-facing artifact was created. Item combines the artifact type and concrete item name in one cell. Artifact type must be singular: Skill, Slash command, Subagent, MCP, Hook, or Plugin. Wrap the artifact type in inline code; write the item name as plain text after it. Notes is always required; never leave it empty. Keep notes short, plain, and literal. Avoid internal implementation terms such as runtime expansion. Prefer phrases like Converted into a Codex skill, Added as a Codex subagent, Added to Codex config, Converted into a Codex hook, Converted, but some Claude hook behavior differs in Codex, Codex does not have an equivalent notification hook, Plugin needs manual setup, or Plugin marketplace needs manual setup.
Self-Healing Loop
Keep looping until the selected migration is complete:
- Run
--plan or --doctor.
- Run the migration with
--dry-run.
- Run the migration for real.
- Fix every generated
## MANUAL MIGRATION REQUIRED block and every manual_fix_required or skipped report row that can be resolved inside Codex artifacts.
- Run
--validate-target.
- Re-run the migrator and validator until the report and validator have no actionable generated-artifact fixes left.
Do not edit source Claude Code files, unrelated project code, secrets, or another repository during this loop. If a report row requires source-provider changes or product judgment, leave the generated Codex artifact with clear manual guidance instead of changing the source.
Commands
Choose the migrator command.
MIGRATE_TO_CODEX='python3 .codex/skills/migrate-to-codex/scripts/migrate-to-codex.py'
Inspect the migration before writing.
$MIGRATE_TO_CODEX --source ~/.claude/ --scan-only
$MIGRATE_TO_CODEX --source ~/.claude/ --target ~/.codex/ --plan
$MIGRATE_TO_CODEX --source ~/.claude/ --target ~/.codex/ --doctor
Dry-run, then run without --dry-run, for global and project.
$MIGRATE_TO_CODEX --source ~/.claude/ --target ~/.codex/ --dry-run
$MIGRATE_TO_CODEX --source ~/.claude/ --target ~/.codex/
$MIGRATE_TO_CODEX --source ./.claude/ --target ./.codex/ --dry-run
$MIGRATE_TO_CODEX --source ./.claude/ --target ./.codex/
Run the post-migration validator against each target after edits.
$MIGRATE_TO_CODEX --validate-target ~/.codex/
$MIGRATE_TO_CODEX --validate-target ./.codex/
Run $MIGRATE_TO_CODEX --help for flags (--scan-only, --plan, --doctor, --validate-target, defaults, and so on). Deep tables and more links are in references/differences.md.
1---2name: migrate-to-codex3description: Migrate supported instruction files, skills, agents, and MCP config into Codex project and global files.4metadata:5 source: https://skillmd.com/skills/slipcast-dev/migrate-to-codex6---78# Migrate to Codex910## Autonomy1112Keep going until the selected migration is completely done: run the migrator, inspect the report, fix migrated Codex instructions/skills/agents/MCP config, and re-run checks. For new artifacts within a clearly selected target (`AGENTS.md`, `.codex/`, `.agents/`, or `~/.codex/`), proceed without redundant confirmation where the user's authorization and higher-priority approval rules permit. Before destructive replacement or deletion, or changes to existing files outside the explicitly agreed set, obtain confirmation and follow all applicable higher-priority approval rules. Preserve unrelated existing Codex config entries in `.codex/config.toml` or `~/.codex/config.toml`, such as `notify`, `projects`, `marketplaces`, or unrelated MCP servers; seek confirmation if they fail validation or directly conflict with the migration. Do not edit source Claude Code files (`.claude/`, `~/.claude/`, `.mcp.json`, or `.claude.json`), unrelated project code, secrets, or another repository.1314## Migration Order1516Run the migration in this order for each selected global or project source:17181. Start by using the available TODO/task list tool. Do not create `MIGRATION_TODOS.md` or any TODO file unless the user explicitly asks. In DSH, `todo_write` takes a `todos` array whose items each have `content` and `status`; use statuses `pending`, `in_progress`, and `completed`. In another runtime, check its current tool schema instead of assuming the same API. Make the TODOs specific to the selected artifacts. Before finishing, update the TODO list so every finished step is marked `completed` and no step remains `in_progress`. Use literal source → Codex target labels, for example:19 - Inspect `.claude/commands` → Codex skills/prompts20 - Inspect `.claude/agents` → `.codex/agents`21 - Inspect `.mcp.json` → `.codex/config.toml` MCP servers22 - Inspect `.claude/settings.json` hooks → `.codex/hooks.json`23 - Migrate safe selected artifacts → Codex files24 - Validate generated `.codex/config.toml`25 - Validate generated `.codex/agents`26 - Report migrated artifacts and manual-review items27282. Read `references/differences.md` (and refresh Codex docs if its `Docs last checked` date is old).29303. Scan and inspect before writing:31 - `--scan-only` lists active and inactive source surfaces.32 - `--plan` prints staged Codex artifact paths and report rows.33 - `--doctor` summarizes readiness, manual-review work, and validation risks.34354. Convert surfaces in the same order the CLI uses:36 - instructions: `CLAUDE.md` / `AGENTS.md` to `AGENTS.md`37 - plugins: report Claude plugin trees and marketplaces as manual migration work38 - hooks: rewrite supported Claude hooks into `.codex/hooks.json` and enable `[features].codex_hooks = true`39 - skills and commands: write Codex skills under `.agents/skills/`40 - config: write `.codex/config.toml` from Claude model/sandbox settings and MCP servers, including `personality = "friendly"` when config is generated41 - subagents: write Codex custom agents under `.codex/agents/`42435. Dry-run, then write the selected target. Use `--replace` only when orphan generated skills or agents should be deleted.44456. Inspect the terminal output and `.codex/migrate-to-codex-report.txt` after real runs.46477. Review generated artifacts in this order: `AGENTS.md`, `.agents/skills/`, `.codex/config.toml`, `.codex/hooks.json`, `.codex/agents/`, then report-only plugin items.48498. Run `--validate-target` against each target after edits.50519. Re-run checks and `--dry-run` after edits.525310. Return the final migration report as one markdown table per scope that has rows. The tables cover only the non-native follow-up migration work you performed, such as skills created from slash commands, subagents, MCP servers, hooks, unsupported/local plugin notes, and manual-review caveats. Include programmatic native import rows for config, instructions, skills, or supported plugins only if you personally migrated them in this follow-up run.5455 If only one scope has rows, render only the table with no heading. If multiple scopes have rows, render one heading before each table. Use `**User Config**` for user-scope rows. For project-scope rows, use the actual project folder name as the heading, for example `**northstar-support-portal**`; do not use `Current Project` as the heading. Do not add prose before or after the table output.5657 Use exactly these columns:5859 **northstar-support-portal**6061 | Status | Item | Notes |62 | --- | --- | --- |63 | `Added` | `Slash command` pr-review | Converted into a Codex skill |64 | `Added` | `Subagent` release-lead | Added as a Codex subagent |65 | `Check before using` | `Hook` PreToolUse | Converted, but some Claude hook behavior differs in Codex |66 | `Not Added` | `Hook` Notification | Codex does not have an equivalent notification hook |67 | `Not Added` | `Plugin` team-macros | Plugin needs manual setup |6869 `Status` must be `Added`, `Check before using`, or `Not Added`. Use `Added` when a Codex-facing artifact was created or changed and needs no special review. Use `Check before using` when a Codex-facing artifact was created or changed but the migration changed semantics, inferred behavior, preserved tool rules as guidance, or dropped unsupported behavior. Use `Not Added` when a source artifact was detected but no Codex-facing artifact was created. `Item` combines the artifact type and concrete item name in one cell. Artifact type must be singular: `Skill`, `Slash command`, `Subagent`, `MCP`, `Hook`, or `Plugin`. Wrap the artifact type in inline code; write the item name as plain text after it. `Notes` is always required; never leave it empty. Keep notes short, plain, and literal. Avoid internal implementation terms such as runtime expansion. Prefer phrases like `Converted into a Codex skill`, `Added as a Codex subagent`, `Added to Codex config`, `Converted into a Codex hook`, `Converted, but some Claude hook behavior differs in Codex`, `Codex does not have an equivalent notification hook`, `Plugin needs manual setup`, or `Plugin marketplace needs manual setup`.7071## Self-Healing Loop7273Keep looping until the selected migration is complete:74751. Run `--plan` or `--doctor`.762. Run the migration with `--dry-run`.773. Run the migration for real.784. Fix every generated `## MANUAL MIGRATION REQUIRED` block and every `manual_fix_required` or `skipped` report row that can be resolved inside Codex artifacts.795. Run `--validate-target`.806. Re-run the migrator and validator until the report and validator have no actionable generated-artifact fixes left.8182Do not edit source Claude Code files, unrelated project code, secrets, or another repository during this loop. If a report row requires source-provider changes or product judgment, leave the generated Codex artifact with clear manual guidance instead of changing the source.8384## Commands8586Choose the migrator command.8788 ```bash89 MIGRATE_TO_CODEX='python3 .codex/skills/migrate-to-codex/scripts/migrate-to-codex.py'90 ```9192Inspect the migration before writing.9394 ```bash95 $MIGRATE_TO_CODEX --source ~/.claude/ --scan-only96 $MIGRATE_TO_CODEX --source ~/.claude/ --target ~/.codex/ --plan97 $MIGRATE_TO_CODEX --source ~/.claude/ --target ~/.codex/ --doctor98 ```99100Dry-run, then run without `--dry-run`, for global and project.101102 ```bash103 $MIGRATE_TO_CODEX --source ~/.claude/ --target ~/.codex/ --dry-run104 $MIGRATE_TO_CODEX --source ~/.claude/ --target ~/.codex/105 $MIGRATE_TO_CODEX --source ./.claude/ --target ./.codex/ --dry-run106 $MIGRATE_TO_CODEX --source ./.claude/ --target ./.codex/107 ```108109Run the post-migration validator against each target after edits.110111 ```bash112 $MIGRATE_TO_CODEX --validate-target ~/.codex/113 $MIGRATE_TO_CODEX --validate-target ./.codex/114 ```115116Run `$MIGRATE_TO_CODEX --help` for flags (`--scan-only`, `--plan`, `--doctor`, `--validate-target`, defaults, and so on). Deep tables and more links are in `references/differences.md`.