Polymarket Btc Up Down Trader

Polymarket BTC Up-Down Trader

Trade Polymarket's BTC daily and weekly UP/DOWN markets with built-in exit discipline. Enters on Binance momentum signals, exits automatically before resolution tail risk bites.

🚨 Framework, not a production trading system. Read DISCLAIMER.md before connecting to a wallet with real funds.

Polymarket only. All trades execute on Polymarket with real USDC. Use --live for real trades; default is dry run.

Not for fast (5m/15m) markets. Use polymarket-fast-loop for those. This skill targets daily and weekly BTC direction markets with hours-to-days of duration.

⚠️ BTC UP/DOWN markets carry Polymarket's crypto taker fee. Effective rate is 3.5% at 50¢, up to ~6.6% on cheap shares. Makers pay 0% and earn a 20% rebate from collected taker fees. Factor this into your minimum edge threshold.

Oracle-Engineering Halt Gate

This skill includes a built-in oracle-engineering risk detector (simmer_sdk.risk.OracleEngineeringDetector). It is enabled by default for all short-dated markets (≤ 5 minutes to resolution).

The gate fires a RESOLUTION_TAMPER_RISK halt when both signals diverge within the final 5 minutes of the resolution window:

• PM concentration ≥ 60% of one side's open interest held by the top wallet(s)
• Spot flow imbalance ≥ 2σ on the underlying (Binance BTC/USDC) in the same direction that benefits the concentrated PM position

When the gate fires:

• Market-maker mode: spreads widened ≥ 3×; no new fills accepted
• Copytrade mode: trade skipped for this cycle
• All modes: decision logged with risk_flag=oracle_engineering

This is a defensive halt only. Do not use it as a buy signal or to copy the attacker's position. See simmer_sdk/risk/oracle_engineering.py for the full detector implementation and shared-knowledge/entities/concepts/oracle-engineering.md for threat-model background.

When to Use This Skill

Use this skill when the user wants to:

• Trade BTC daily or weekly UP/DOWN prediction markets on Polymarket
• Apply systematic exit discipline (don't hold to settlement)
• Use CEX price momentum as the entry signal
• Monitor open positions and auto-exit when targets are hit

Setup Flow

1. Install the Simmer SDK

   pip install simmer-sdk
   

2. Set your API key

   • Get from simmer.markets/dashboard → SDK tab
   • export SIMMER_API_KEY="your-key-here"

3. Set wallet private key (required for live trading)

   • export WALLET_PRIVATE_KEY="0x..."
   • Not needed for dry-run or managed wallets.

4. Configure exit discipline (optional — defaults are well-tuned)

   python strategy.py --config
   

Quick Start

# Dry run — see what would happen
python strategy.py

# Go live
python strategy.py --live

# Monitor-only (check exits without new entries)
python strategy.py --live --monitor

# Quiet mode for cron
python strategy.py --live --quiet

How to Run on a Loop

Linux crontab:

# Every 30 minutes
*/30 * * * * cd /path/to/skill && python strategy.py --live --quiet

OpenClaw native cron:

openclaw cron add \
  --name "BTC Up-Down Trader" \
  --cron "*/30 * * * *" \
  --session isolated \
  --message "Run BTC up-down trader: cd /path/to/skill && python strategy.py --live --quiet"

Configuration

All settings configurable via config.json, environment variables, or --set:

python strategy.py --set exit_before_resolution_hours=2.0
python strategy.py --set volume_spike_exit_multiplier=4.0
python strategy.py --set target_hit_capture_pct=0.75

Exit Discipline Knobs

Why these defaults? Exit behavior on short-dated prediction markets skews heavily toward early exits — the final hours before resolution compress remaining upside while tail risk (last-minute reversals, oracle variance) stays constant. The defaults are calibrated to exit early while capturing the bulk of the move. Empirical work on short-dated crypto UP/DOWN exit patterns informed the calibration; adjust based on your own backtest results.

Entry Knobs

Example config.json

{
  "exit_before_resolution_hours": 1.0,
  "volume_spike_exit_multiplier": 3.0,
  "target_hit_capture_pct": 0.85,
  "entry_threshold": 0.05,
  "min_momentum_pct": 0.3,
  "max_position": 10.0,
  "daily_budget": 50.0
}

Exit Logic

Each run cycle evaluates open positions against three triggers, in priority order:

1. time_cap — Time-based exit

Closes position when the market is within exit_before_resolution_hours of resolution.

hours_to_resolution ≤ exit_before_resolution_hours → EXIT (time_cap)

This is the hard floor. Holding to settlement adds tail risk (oracle variance, thin liquidity, last-minute manipulation) with little remaining upside on a near-resolved market.

2. target_hit — Profit capture exit

Closes position when it has captured target_hit_capture_pct of the theoretical maximum gain.

YES positions: (current_price - entry_price) / (1.0 - entry_price) ≥ 0.85 → EXIT (target_hit)
NO positions:  (entry_price - current_price) / entry_price ≥ 0.85 → EXIT (target_hit)

Example: Bought YES at $0.40. Maximum gain = 1.0 - 0.40 = $0.60/share. At $0.91, captured = (0.91 - 0.40) / 0.60 = 85% → exit.

3. volume_spike — Smart-money volume exit

Closes position when 10-minute CLOB volume exceeds volume_spike_exit_multiplier× the rolling baseline.

current_10m_volume / avg_baseline_volume ≥ 3.0 → EXIT (volume_spike)

A sudden surge in volume near resolution typically signals that informed traders have positioned ahead of outcome certainty. Exiting into the spike captures the liquidity premium.

Exit Reasons

Every exit logs one of four reasons:

CLI Reference

python strategy.py                      # Dry run (show positions + opportunities)
python strategy.py --live               # Execute real trades
python strategy.py --monitor            # Only run exit checks (no new entries)
python strategy.py --positions          # Show open positions
python strategy.py --config             # Show current config
python strategy.py --set KEY=VALUE      # Update config
python strategy.py --quiet              # Only output on trades/errors

Source Tagging

All trades are tagged source: "sdk:btcupdown". This keeps BTC UP/DOWN P&L separate from other strategies in your Simmer portfolio.

Troubleshooting

"No active BTC UP/DOWN markets found"

• Gamma API may be slow or markets may not be trading. Try again in a few minutes.
• Check polymarket.com directly for active BTC UP/DOWN markets.

"Could not fetch BTC momentum"

• Binance API rate-limited. Increase lookback_minutes or wait.

"Momentum X% < minimum Y%"

• Signal not strong enough. Entry threshold working correctly. Adjust min_momentum_pct if too conservative.

Volume spike trigger not firing

• Default baseline needs 6 prior 10-minute windows of data. In low-volume markets, set volume_baseline_windows lower or increase volume_spike_exit_multiplier.

"External wallet requires a pre-signed order"

• WALLET_PRIVATE_KEY is not set. Export the private key for your Polymarket wallet.
• The SDK handles all signing automatically once the env var is set.

"Balance shows $0 but I have funds on Polygon"

• Polymarket V2 uses pUSD (PolyUSD). Migrate at simmer.markets/dashboard (one click, ~30s).