Overleaf Sync

overleaf-sync

Sync a local git clone of a shared Overleaf project: pull collaborators' latest, check whether Overleaf has moved ahead, or (only on explicit request) publish your local edits back — without ever erasing collaborators' work.

Background: the setup this skill assumes

Overleaf exposes each project as a git remote (Overleaf menu → Sync → Git; paid feature). The shared project is cloned into a subfolder of your repo — Overleaf/ by convention — which is its OWN git repo, separate from your project's repo.

• Remote origin = https://git.overleaf.com/<project-id>.
• Auth is an Overleaf git token (olp_…), stored in the OS keychain via git credential so pulls are non-interactive (username git, not your email).
• Branch layout inside Overleaf/:
  • master — pristine mirror of Overleaf. Only ever updated by git pull. NEVER edit here.
  • local-edits — where you edit offline.
• Push is physically disabled as a safety net: remote.origin.pushurl is set to no_push, so git push fails until deliberately re-enabled. Clone, fetch, and pull only READ from Overleaf and cannot change the shared project; only push writes.
• Overleaf/ should be in your project's top-level .gitignore so the shared paper is never pushed to your personal repo. (See the one-time setup note at the end.)

When to invoke

/overleaf-sync [status|pull|diff|publish] — default action is status.

Use status/pull/diff freely (read-only w.r.t. Overleaf). Use publish ONLY when the user explicitly says to publish/push, and treat it as the one dangerous operation.

Preconditions (check first, every time)

1. Overleaf/ exists and is a git repo: git -C Overleaf rev-parse --git-dir. If not, stop and point the user to the one-time setup at the end of this file; do not improvise.
2. Run all git commands with -C Overleaf. If the project root path has spaces, quote it; the Overleaf clone dir itself should have no spaces.

Actions

status (default) — is Overleaf ahead? [read-only]

1. git -C Overleaf fetch origin (non-interactive).
2. Report ahead/behind of master vs origin/master: git -C Overleaf rev-list --left-right --count master...origin/master.
3. If origin/master is ahead, list the new commits (git -C Overleaf log --oneline master..origin/master) and the changed files (git -C Overleaf diff --stat master origin/master).
4. Report the current branch and whether the working tree is clean. Output e.g.: "Overleaf is 2 commits ahead; main.tex changed (+34/-1). You are on local-edits (clean). Run /overleaf-sync pull to update the mirror." Make NO changes.

pull — update the local mirror from Overleaf [read-only w.r.t. Overleaf]

1. git -C Overleaf fetch origin.
2. If master is behind: fast-forward it — git -C Overleaf fetch origin master:master if not currently on master, else git -C Overleaf pull --ff-only. Never a non-ff pull.
3. Summarise what changed (diff --stat + the new commit subjects).
4. If the user is on local-edits and master advanced, OFFER (do not auto-run) to update their branch: git -C Overleaf rebase master (or merge master). Let them choose. Never touches Overleaf.

diff — show differences

• local-edits vs master: git -C Overleaf diff master..local-edits -- <file> (your unpublished edits).
• mirror vs Overleaf: run status first, then git -C Overleaf diff master origin/master. Pick based on the user's wording; default to "what are my unpublished edits" (local-edits vs master).

publish — send local edits to Overleaf [WRITES to the shared project — DANGEROUS]

Do NOT run any step past 3 without an explicit, in-this-turn "yes, publish" from the user. Never use --force/-f. The merge step is the guard against erasing others' work.

1. Confirm intent. Restate exactly what will be pushed (branch, files, commit summaries). Get explicit confirmation before proceeding.
2. Ensure local-edits is committed: if the tree is dirty, show git -C Overleaf status and commit with the user's message (author: the user; NO Co-Authored-By trailer).
3. git -C Overleaf checkout master && git -C Overleaf pull --ff-only — grab everyone's newest first. (If this isn't a fast-forward, STOP — the mirror diverged; investigate.)
4. git -C Overleaf merge --no-ff local-edits. If git reports CONFLICTS: STOP, show the conflicted files, and have the user resolve them — never auto-resolve, never overwrite.
5. Show the merged result for review: git -C Overleaf diff origin/master..master --stat and the relevant hunks. Get a final go-ahead.
6. Re-enable push, push, then immediately re-disable it:
   • git -C Overleaf remote set-url --push origin "$(git -C Overleaf remote get-url origin)"
   • git -C Overleaf push origin master
   • git -C Overleaf remote set-url --push origin no_push ← restore the safety
7. git -C Overleaf checkout local-edits. Confirm the push succeeded and push is disabled again.

Output format

overleaf-sync [action]: <one-line result>
  branch: <current> (clean|dirty)
  mirror vs Overleaf: <N ahead / M behind>
  [changed files / next suggested action]

Non-negotiables

• status, pull, diff never write to Overleaf. publish is the only writing path and needs explicit per-invocation confirmation.
• Never git push --force. Never resolve merge conflicts on the user's behalf.
• Always leave push DISABLED (pushurl=no_push) after finishing.
• If the auth token was rotated, a pull fails with an auth error — tell the user to re-store the new olp_… token in the keychain (do NOT put the token in a URL or commit it):

  printf "protocol=https\nhost=git.overleaf.com\nusername=git\npassword=<token>\n\n" | git credential approve
  

One-time setup (do this once, by hand, before the skill is usable)

Run from your project root. Replace <project-id> and <token> with your own.

# 1. Store the Overleaf git token so pulls are non-interactive (macOS/Linux keychain):
printf "protocol=https\nhost=git.overleaf.com\nusername=git\npassword=<token>\n\n" \
  | git credential approve

# 2. Clone the shared project into Overleaf/ (its own repo, NOT a submodule):
git clone https://git@git.overleaf.com/<project-id> Overleaf

# 3. Create the editing branch and disable accidental pushes:
git -C Overleaf branch local-edits
git -C Overleaf remote set-url --push origin no_push

# 4. Keep the shared paper out of your personal repo:
echo "/Overleaf/" >> .gitignore

After this, /overleaf-sync works. Edit on local-edits; master stays a clean mirror.