CI

odu

odu (Tamil ஓடு — "run") runs the just recipe DAG tagged [metadata("ci")] across platforms and posts GitHub commit statuses per <recipe>@<platform> context. Unlike batch runners, the run is live state you attach to: the coordinator serves a typed surface on .ci/odu.sock, so status/logs/attach are in-band — no process-compose, no separately-versioned socket client.

Prefer the MCP face for runs. When the odu-mcp skill is present (the mcp__odu__* tools — check for an odu MCP server before shelling out), drive runs through it — run → wait_for_settle (fail-fast) → read the red node's log → node_rerun, with cancel / run({supersede}) to call off or replace a run. It spawns the same coordinator but gives you structured results and the fail-fast loop instead of scraping terminal output. The nix run … -- run CLI below is the reference and the fallback when no MCP server is wired.

Logs are a resource, not a tool. Don't look for a log-tail tool — there isn't one. A node's output is the MCP resource surface://collections/logs/{id} ({id} is the node, e.g. ci::unit@aarch64-darwin), read with ReadMcpResourceTool: the live buffered tail while the run is up, else the durable per-SHA log on disk. So when wait_for_settle returns a red node, the "read the log" step is ReadMcpResourceTool on that node's surface://collections/logs/{id} — subscribe for push updates, or just re-read to poll. (surface://streams/nodes is the pipeline snapshot resource alongside it.)

Invoking

nix run github:juspay/odu -- <subcommand> [args]

Pin a ref for reproducibility, or — if the consuming repo npins-pins odu and re-exports it (kolu does) — prefer its own flake output so the version is repo-controlled:

nix run .#odu -- <subcommand> [args]

Modes

Strict by default — odu run refuses a dirty tree, pins HEAD via git worktree, posts commit statuses, and splits per-recipe logs into .ci/<sha>/<plat>/<recipe>.log. Three flags relax that policy:

Every mode ends with the same ── ci run summary @ <sha7> ── verdict block (the sha reads <sha7>+dirty for a live-tree run on uncommitted changes) and exits non-zero if any node failed or errored.

Common invocations

# Full pipeline (the [metadata("ci")] root, every configured platform).
nix run github:juspay/odu -- run

# Dev iteration on a dirty tree: no clean-tree refuse, no HEAD pin, no posts.
nix run github:juspay/odu -- run --no-strict

# Re-run a single failed recipe on one lane — overwrites the same GitHub
# commit-status context the full run wrote (closes the red check).
nix run github:juspay/odu -- run e2e@x86_64-linux

# One recipe across every pipeline platform; selectors compose.
nix run github:juspay/odu -- run e2e lint

# Restrict the WHOLE fanout to one platform (repeatable).
nix run github:juspay/odu -- run --platform x86_64-linux

# Skip the dependency closure; run ONLY the named nodes (_ci-setup still rides).
nix run github:juspay/odu -- run --no-deps e2e@aarch64-darwin

# A different DAG root instead of the [metadata("ci")] recipe.
nix run github:juspay/odu -- run --root ci::e2e

# One-shot redirect of a platform's host (how a pool-lease wrapper pins a box).
nix run github:juspay/odu -- run --host x86_64-linux=my-build-box

# One NDJSON line per node transition, for agents/tools driving CI:
# {"node":"ci::e2e@x86_64-linux","recipe":"ci::e2e","platform":"x86_64-linux",
#  "status":"running|success|failed|skipped|errored","exit_code":1,
#  "log":".ci/<sha7>/x86_64-linux/ci::e2e.log"}
nix run github:juspay/odu -- run --progress json

Without --progress json, output adapts to where stdout points: a live colour lane-matrix with a log-tail footer on a TTY; quiet transition lines plus a once-a-minute "… still running" heartbeat when piped.

Inspection subcommands (no side effects)

nix run github:juspay/odu -- dump            # resolved pipeline as JSON
nix run github:juspay/odu -- graph           # dependency graph (Mermaid)
nix run github:juspay/odu -- protect --dry-run   # the (recipe × platform) contexts
nix run github:juspay/odu -- protect             # PATCH branch protection to them

Live introspection (attach to a run in progress)

While odu run is live in a checkout, these attach to its surface over .ci/odu.sock:

nix run github:juspay/odu -- status          # snapshot; -o json for tooling
nix run github:juspay/odu -- attach          # live TUI dashboard on a tty
                                             # (digits attach · n/p cycle ·
                                             #  r rerun · q quit); -o json
                                             # = transition stream
nix run github:juspay/odu -- logs -f e2e@x86_64-linux
nix run github:juspay/odu -- cancel          # stop the live run, cleanly

No run in progress ⇒ exit non-zero with no run in progress in this checkout (no live socket at .ci/odu.sock). One run per checkout — a second odu run refuses while the socket is live.

Cancel / supersede / linger. odu cancel drives the live run's teardown from a second process (finalize posted statuses, close lanes, drop the socket) and waits until it's gone — no need to wait out a doomed run or pkill the coordinator. odu run --supersede cancels whatever's live here first, then starts ("stop this, run the fixed commit"). By default a run exits the instant it drains; odu run --linger keeps it serving past settle so a node can be rerun later (retry a flake), self-reaping after an idle period or on cancel.

Hosts config

$ODU_HOSTS (a file path) → ~/.config/odu/hosts.json → fallback ~/.config/justci/hosts.json (zero-config migration from justci):

{
  "x86_64-linux": "my-linux-builder",
  "aarch64-darwin": "me@mac-mini.local"
}

Keys are Nix system tuples; values are anything ssh dials, or localhost (runs directly against the snapshot, no closure copy). Missing platforms silently drop from the fanout. --host PLAT=ADDR overrides per run.

A lane host needs only ssh + Nix + outbound https: the runner ships as a Nix closure (nix copy → realise on the host), and the source arrives by git fetch of the pushed SHA — remote lanes cannot test unpushed commits (no git-bundle transport; push first). The lane host's own nix is used on the runner's PATH (never a pinned client — version skew against the host daemon corrupts CA-derivation handling).

Semantics worth knowing

• Lanes are one-shot: a lane whose ssh link dies mid-run fails as errored (GitHub state error, Errored (<dur>) description); live state does not survive a runner restart — the per-SHA log files do.
• Skipped nodes post no status: an absent required context is what blocks the merge.
• The coordinator resolves the generic lane runner from odu's own flake, not the repo under test: nix eval $ODU_RUNNER_FLAKE#packages.<platform>.odu-runner.drvPath, where ODU_RUNNER_FLAKE is baked onto the odu wrapper from self.outPath at build time. A consuming repo no longer re-exports odu-runner. There is no override or fallback — the runner is the exact build that shipped the coordinator (they share an RPC contract); a binary built without the baked flake refuses to run.

When NOT to use this skill

• Questions about odu's internals or design history — read the README and the kolu Atlas note A CI runner you attach to.
• Project-specific CI operations (warm pools, host leases, banned flags) — that's the consuming repo's operational docs, layered on top of this reference.