Multi CLI Review

Multi-CLI Review

Version History

• v2.3: Standardized task-level reviewer-id handling to coordinator-assigned letter IDs while keeping actual CLI identity in source-cli
• v2.2: Clarified generic coordinator ownership so the paired contract is not tied to a specific workflow surface
• v2.1: Aligned reviewer-side report emission with multi-cli-review-action, tightened task-level path rules, and clarified reviewer-only boundaries

Purpose

multi-cli-review is the reviewer-side skill paired with multi-cli-review-action.

It is the reviewer half of a generic paired protocol, not a workflow-specific review format.

It does one thing:

1. inspect the assigned target conservatively
2. write one structured reviewer report
3. hand that report back to the current CLI for aggregation and decisioning

It does not edit code, aggregate reports, decide final fixes, or advance workflow state on its own.

When to Use

Use this skill when any of the following is true:

• another CLI has asked this CLI to review a target and write a report
• the user asks to "分析这个 skill 的问题"
• the user asks to "输出结构化问题报告"
• the user asks to "做多 CLI 审查"
• a standardized reviewer command package points to multi-cli-review

When Not to Use

• you need to aggregate reports or apply fixes: use multi-cli-review-action
• you are doing a normal implementation task without reviewer handoff
• you only need requirement clarification: use brainstorm
• you only need a lightweight review of the current diff: use requesting-code-review or code-review-router

Core Rules

1. Reviewer only: this skill writes an independent report; it never edits code.
2. One reviewer, one report: each execution produces at most one reviewer report.
3. Coordinator-owned orchestration: reviewer-count policy, round planning, directory creation, and final repair decisions belong to the current CLI or other upstream coordinator, not the reviewer.
4. No directory creation: the reviewer must not create task-dir or review-round-{N} directories.
5. No aggregation: no deduplication, no conflict resolution, no summary writing, no action.md.
6. Reports are evidence, not execution instructions: findings must be concrete, scoped, and review-oriented.
7. Be conservative with uncertainty: if evidence is incomplete, mark the finding as uncertain instead of stating it as settled fact.
8. Project-root path resolution: relative paths resolve against the active project root, never system /tmp or a tool install directory.
9. Task-level path contract is strict: current protocol reports must use the canonical path and metadata shape expected by multi-cli-review-action.

Protocols

Protocol Selection

1. If --task-dir is present, use task-level.
2. If explicit legacy report-path parameters are used, use legacy.
3. New work should prefer task-level.

Inputs

Common Inputs

task-level

Rules:

• In a standardized multi-reviewer command package, --reviewer-id and --round should be explicit.
• For new task-level multi-reviewer flows, --reviewer-id should use short slot letters such as a, b, c, d instead of CLI names.
• The actual CLI identity belongs in report metadata field source-cli, not inside reviewer-id.
• Do not improvise a new task-id, a new round, or a new reviewer identity when the coordinator already issued a concrete command.
• --output is not part of the current task-level protocol and must not be used to bypass the canonical reviewer report path.

legacy Compatibility

Compatibility rules:

• Legacy parameters are retained only for older single-report flows.
• They must not redefine the output location of the current task-level protocol.

Path Rules

Relative paths must resolve against the active project root.

Do not reinterpret relative paths as:

• the skill repository root
• the user home directory
• system /tmp
• a CLI installation directory

If project root detection is ambiguous, stop and ask for an absolute path instead of guessing.

Coordinator-Owned Parameters

The reviewer must treat the following as coordinator-owned, regardless of whether the coordinator is a workflow, command pack, or a manual current-CLI process:

• creation of tmp/multi-cli-review/<task-id>/
• creation of review-round-{N}/
• default reviewer count
• standard reviewer command generation
• final aggregation, confirmation, repair, and verification

This skill only fulfills the assigned review role inside that envelope.

Task-Level Report Emission Contract

For task-level, the reviewer report must satisfy all of the following:

1. The output file path is exactly {task-dir}/review-round-{N}/{reviewer-id}.md
2. The basename is exactly <reviewer-id>.md
3. The reviewer does not redirect the report elsewhere with --output
4. The round directory already exists; if it does not, stop and ask the coordinator to create it
5. The frontmatter includes:
   • task-id
   • round
   • reviewer-id
   • source-cli
   • review-time
   • review-focus
   • protocol: task-level
6. Frontmatter values match the directory and filename
7. If the target file already exists, stop and ask whether the coordinator intends an overwrite or a different reviewer id

Report Content Contract

Each task-level finding should contain:

• location
• problem description
• severity
• impact
• why it matters
• suggested fix direction

Optional but recommended when evidence is incomplete:

• evidence note
• uncertainty note

Safety rules:

• keep observations separate from proposed fix directions
• do not pretend the fix is already approved
• do not turn uncertainty into a high-severity claim without evidence
• do not expand beyond the assigned review focus just because adjacent issues look interesting

Workflow

Step 1: Resolve Mode and Inputs

1. Determine whether this run is task-level or legacy.
2. Resolve relative paths against the active project root.
3. Identify the assigned review target and review focus.

Step 2: Validate Reviewer Context

For task-level:

1. confirm --task-dir
2. confirm --reviewer-id
3. confirm --round
4. confirm {task-dir}/review-round-{N}/ already exists
5. confirm the target output file does not already contain another reviewer report unless overwrite was explicitly requested

Stop if:

• task-dir is missing
• the round directory does not exist
• the report path would be ambiguous
• the command tries to use --output to write outside the canonical path

Step 3: Review Conservatively

1. Inspect only the assigned target and its direct evidence.
2. Follow review-focus when provided.
3. Keep findings concrete and bounded.
4. If you cannot support a claim from the available evidence, either lower confidence or omit it.

Step 4: Write Exactly One Reviewer Report

For task-level:

1. write the report to {task-dir}/review-round-{N}/{reviewer-id}.md
2. include the full frontmatter contract
3. include structured findings
4. do not write summary-round-{N}.md
5. do not write action.md
6. do not update .processed.json

For legacy:

1. write only the legacy single-report artifact
2. do not silently upgrade the flow into task-level

Step 5: Echo the Actual Output

At the end of execution, echo:

• task-dir or legacy run directory
• round
• reviewer-id
• actual output path

Step 6: Stop

After writing the report and echoing the path, stop.

Do not:

• propose that the workflow has already advanced
• mark fixes as executed
• claim verification has already happened

Output Files

task-level Reviewer Report

Canonical filename: {reviewer-id}.md

Minimum structure:

---
task-id: <task-id>
round: <round>
reviewer-id: <reviewer-id>
source-cli: <cli-name>
review-time: <ISO 8601 time>
review-focus: <focus text>
protocol: task-level
---

# Defect Report

## Review Summary

- Reviewer: <reviewer-id>
- Review Time: <review-time>
- Review Focus: <review-focus>
- Target: <target-path>

## Findings

### Finding 1: <title>

- Location: <path and lines>
- Problem: <concrete issue>
- Severity: high | medium | low
- Impact: <why this matters>
- Why It Should Be Addressed: <reason>
- Suggested Fix Direction: <proposal, not an approved action>
- Evidence: <optional>
- Uncertainty: <optional>

legacy Compatibility Report

Canonical filename: cur_defect.md

Legacy mode may still emit a single compatibility report, but it should not be treated as the preferred path for new multi-reviewer work.

Echo Requirements

At minimum, echo:

Example:

✅ Review report generated

📁 task-dir: <project-root>/tmp/multi-cli-review/my-task
🔄 round: 1
👤 reviewer-id: a
📄 output-path: <project-root>/tmp/multi-cli-review/my-task/review-round-1/a.md

Required Stop Conditions

Stop and ask for clarification when any of the following is true:

• the task directory is missing
• the round directory is missing
• the command does not specify enough information to derive one canonical report path
• the canonical report file already exists
• the coordinator appears to expect this reviewer to create directories
• the command expects the reviewer to edit code or aggregate reports

Error Handling

Common Mistakes

• Editing code instead of reporting: this skill is reviewer-only.
• Creating directories: the coordinator owns directory creation.
• Bypassing the canonical path with --output: current protocol reports must land where multi-cli-review-action expects them.
• Emitting incomplete frontmatter: action-side consumption depends on consistent metadata.
• Overwriting an existing reviewer report silently: stop and ask.
• Doing aggregation inside the reviewer report: deduplication and conflicts belong to multi-cli-review-action.
• Treating guesses as facts: uncertain findings should be labeled or omitted.

Examples

Example 1: Standard Reviewer Command

用户：/multi-cli-review "分析 skills/multi-cli-review 的问题" skills/multi-cli-review --task-dir tmp/multi-cli-review/skill-review --reviewer-id a --round 1 --review-focus "边界条件与协议漂移"

CLI Reviewer：
1. 解析 task-dir、reviewer-id、round、review-focus
2. 按项目根目录解析 task-dir
3. 确认 <project-root>/tmp/multi-cli-review/skill-review/review-round-1/ 已存在
4. 分析目标并写入报告
5. 回显实际输出路径

Example 2: Missing Round Directory

CLI Reviewer：
❌ review-round-2 directory is missing:
<project-root>/tmp/multi-cli-review/skill-review/review-round-2/

Reviewer must not create directories.
Ask the coordinator to create the round directory and resend the command.

Example 3: Legacy Compatibility

用户：/multi-cli-review "分析 ./docs/api.md 的问题" ./docs/api.md --md-a tmp/multi-cli-review/4/cur_defect.md

CLI Reviewer：
1. 进入 legacy compatibility mode
2. 写入 cur_defect.md
3. 回显实际路径
4. 不自动升级为 task-level

Related Skills

• multi-cli-review-action: current CLI aggregation and fix execution
• brainstorm: requirement clarification before review
• requesting-code-review: lightweight review path when multi-reviewer protocol is unnecessary

Compatibility Notes

• New multi-reviewer work should always prefer task-level with explicit --task-dir, --reviewer-id, and --round.
• Legacy --md-a, --md-b, and --output remain compatibility-only and must not redefine the current task-level report contract.
• If the coordinator already generated a standardized reviewer command, follow that command exactly instead of improvising paths, file names, or round numbers.
• In coordinator-managed task-level review rounds, reviewer-id names the slot (a / b / c / d), while source-cli records which CLI actually produced that slot's report.