SwanHubX SwanLab Skill
SwanLab is an AI training experiment tracking platform. This skill covers two usage patterns:
- Writing tracking code — use the Python SDK (
swanlab.init,swanlab.log,swanlab.finish, media helpers) - Reading experiment data — use the
swanlab apiCLI to query metrics, logs, summaries, media, etc.
Reference Routing
| If the user wants to... | Read this reference |
|---|---|
| Write tracking code (init/log/finish/media) | references/SDK_QUICKSTART.md |
| Query data via CLI (metrics/summary/logs/filter/etc.) | references/CLI_REFERENCE.md |
| Understand data model / terminology / filter syntax | references/SWANLAB_CONCEPTS.md |
| Analyze runs/projects, compare experiments, write an experiment report | references/ANALYSIS_GUIDE.md |
| Plot metrics or compare experiments visually | See Scripts below |
Version note (SDK ≥ 0.9.0): use
swanlab api run seriesto discover an experiment's metric keys.run column/run columnsare deprecated since0.9.0and do not apply to multi-view experiments — only fall back to them when the installed SDK is< 0.9.0. SeeCLI_REFERENCE.md > Version Applicability.
Run Modes
swanlab.init(mode=...) controls where data goes:
| Mode | Local Storage | Cloud Upload | Use Case |
|---|---|---|---|
online |
Yes (protobuf) | Yes (Transport → HTTP) | Normal cloud usage. Requires login. |
local |
Yes (protobuf) | No | Air-gapped / no account needed. |
offline |
Yes (protobuf) | No (syncable later via swanlab sync) |
Save locally, upload to cloud later. |
disabled |
No | No | Completely disable all logging. |
Default is online if logged in; otherwise an interactive prompt offers login, registration, or offline. In non-interactive environments without an API key, init raises an error instead of falling back.
Scripts
Two helper scripts are available for visualizing experiment data:
scripts/plot_metrics.py — Single Experiment Line Chart
Trigger when the user wants to visualize scalar metrics from one experiment (e.g. "plot my loss curve", "show training metrics chart").
python scripts/plot_metrics.py username/project_name/run_id --keys loss,acc
python scripts/plot_metrics.py user/proj/run1 -k loss -o loss_chart.png -s 500
python scripts/plot_metrics.py --data metrics.json -k loss,acc -o chart.png # from saved JSON
scripts/runs_benchmark.py — Cross-Experiment Comparison
Trigger when the user wants to compare the same metric across multiple experiments (e.g. "compare loss across runs", "benchmark these experiments").
python scripts/runs_benchmark.py user/proj/run1 user/proj/run2 user/proj/run3 -k loss
python scripts/runs_benchmark.py user/proj/run1 user/proj/run2 -k loss --direction lower
python scripts/runs_benchmark.py user/proj/run1 user/proj/run2 -k loss,acc --normalize
python scripts/runs_benchmark.py --data benchmark_data.json -k loss # from saved JSON
Both scripts require swanlab login (or --api-key / --host flags).
Path Convention
CLI commands use username/project_name (project) or username/project_name/run_id (experiment). See SWANLAB_CONCEPTS.md > Path Convention for details.
Quick Disambiguation
| User says... | They probably mean... | Route |
|---|---|---|
| "track my training" / "log metrics" | Write tracking code | SDK_QUICKSTART.md |
| "log images/audio/text" | Log media data | SDK_QUICKSTART.md |
| "my loss curve" / "experiment metrics" | Query scalar data | CLI_REFERENCE.md > run metrics |
| "filter experiments" | Query by conditions | CLI_REFERENCE.md > run filter |
| "my experiments" / "list runs" | List experiments | CLI_REFERENCE.md > run list |
| "compare runs visually" | Cross-experiment chart | scripts/runs_benchmark.py |
| "plot metric chart" | Single-experiment chart | scripts/plot_metrics.py |
| "experiment config" | Hyperparameters | CLI_REFERENCE.md > run info |
| "console output" | Captured logs | CLI_REFERENCE.md > run logs |
| "what metrics are tracked" | Metric keys | CLI_REFERENCE.md > run series |
| "check connectivity" / "can I reach swanlab" | Environment check | swanlab ping |
| "check login status" / "am I logged in" | Verify credentials | swanlab verify |
| "project not found" / a query returns 404 | Wrong host (most likely) | CLI_REFERENCE.md > Troubleshooting |
| run fields / run list or run info response | Run object schema | SWANLAB_CONCEPTS.md > Run Object Schema |
| "analyze this project/run" / "experiment report" | Analysis pipeline | ANALYSIS_GUIDE.md |
Environment Connectivity
Before writing tracking code or running CLI queries, especially in online mode, run these two checks to confirm the environment is ready:
1. swanlab ping — Test network reachability
The fastest way to diagnose connectivity issues. Run it first when a user reports upload failures, login problems, or unknown mode fallbacks.
swanlab ping
# Reports: API host, web host, latency, and login status.
# If ping fails, check SWANLAB_API_HOST / network proxy / firewall settings.
2. swanlab verify — Validate login credentials
After confirming the server is reachable, use swanlab verify to check that stored credentials are valid and have not expired. This reads the API key and host from the local .netrc file (created by swanlab login).
swanlab verify
# Validates stored API key against the server.
# Reports: which host (default https://swanlab.cn) and the logged-in username.
# Fails if: not logged in, API key is invalid, or key has expired.
swanlab verify --local
# Check local login status (.swanlab in current directory) instead of the global one.
Recommended pre-flight sequence:
swanlab ping→ confirm the server is reachableswanlab verify→ confirm credentials are valid, and note which host you are logged into- Confirm the target project lives on that host. SwanLab has multiple independent instances (public
swanlab.cn+ self-hosted deployments) and credentials are per-instance — seeSWANLAB_CONCEPTS.md > Instances, Hosts & Credentials. If the project is on another instance, pass--host/--api-keyon every command (or exportSWANLAB_API_HOST/SWANLAB_API_KEY). A404 Not_Foundfromproject info/run listmeans wrong host, not a missing project — seeCLI_REFERENCE.md > Troubleshooting. - Proceed with
swanlab apiqueries or SDK code
Behavioral Constraints
See CLI_REFERENCE.md > Behavioral Constraints for the full list. Key rules:
- Use
--allonly when the user explicitly asks for it (e.g. "fetch all", "get everything", "complete list"). For paginated list commands, always use default pagination (--page_num/--page_size). - Always ask for specific metric keys before running
run metricsorrun medias. If the user doesn't know the key names, first runrun series PATHto discover them (run columns PATHonly as a fallback on SDK< 0.9.0). - Always persist large metric data to file via
--save, then visualize withscripts/plot_metrics.py --data file.jsonor userun summaryfor aggregate stats.
Further Reading
This skill covers the most common SwanLab workflows for AI coding agents. For details that are out of scope here (full SDK surface, advanced CLI flags, self-hosted deployment, integrations, etc.), consult the official SwanLab documentation:
- Cloud guide (what is SwanLab, concepts, usage): https://docs.swanlab.cn/guide_cloud/general/what-is-swanlab.md
- Python SDK & OpenAPI reference: https://docs.swanlab.cn/api/api-index.md