Dev Clean Wsl

dev-clean-wsl

Free space on a WSL2 machine, then hand the user the one step they must run themselves to make that space real.

The crux (why WSL is different)

On WSL2 the Linux filesystem is a single ext4.vhdx file that lives on the Windows C: drive. Two consequences drive this whole skill:

1. / looking healthy is not enough. The disk that actually fills up is

   usually C:, not the Linux /. The scan reports both — read C: first.

2. Deleting files inside WSL does not shrink the vhdx. The vhdx only grows; freed

   blocks stay allocated until the vhdx is compacted from Windows. So every purge below is "banked" inside WSL and becomes real free space on C: only after the compaction step. Always finish with that step — skipping it makes the cleanup look like it did nothing from Windows' side.

wsl --shutdown (required for compaction) kills this session, so compaction is always handed to the user as commands to run in a Windows terminal — never run it from inside WSL.

Step 1 — Scan (read-only)

bash $HOME/.claude/skills/dev-clean-wsl/scripts/scan.sh [code-root]

code-root is optional (defaults to $HOME/repos, else $HOME) — the directory searched for node_modules and orphaned target/ dirs. The deep home scan takes ~1 minute. It deletes nothing and prints: / vs C: usage, the vhdx path + size, top home consumers, and per-category reclaimable sizes.

Step 2 — Present findings and confirm

Turn the scan into a short table grouped by safety, then get the user's pick (AskUserQuestion works well for multi-select). Do not delete large or ambiguous things silently — these caches are recoverable but rebuilds/re-downloads cost time.

Safety tier, highest-value-and-safest first:

Leave alone unless the user explicitly names them:

• User data, not cache — e.g. ~/youtube-dl, ~/Downloads, media. Never auto-delete.

• Published/intentional build outputs — dist/, packaged release tarballs.

  These are project-specific and may be wanted; do not treat a generic dist/ as cache.

Step 3 — Purge (only what the user confirmed)

Safety rules:

• Relative-path deletes only. cd into the parent, then rm -rf ./name —

  never rm -rf /absolute/path. This is a guardrail against a mistyped absolute path.

• Check nothing is using a dir before clearing it. Before wiping a target/,

  build dir, or CI-runner workspace, confirm no live build/process owns it (ps -eo cmd | grep -iE 'cargo|Runner\.Worker'). Clearing a dir mid-build breaks it.

• Confirm "orphaned" before claiming zero-cost. An in-repo target/ is orphaned

  only if a global target-dir redirect (env CARGO_TARGET_DIR or ~/.cargo/config.toml [build] target-dir) points elsewhere AND its newest artifact predates the switch. The scan prints both signals.

Per-category commands (adapt paths from the scan output):

# Orphaned in-repo target (zero rebuild cost — redirect is active elsewhere)
cd /path/to/repo && rm -rf ./target

# Orphaned old pnpm store version (active is vN; vN-1 etc. are dead)
cd "$(dirname "$(pnpm store path)")" && rm -rf ./v10        # example: active is v11

# cargo incremental cache (safe; minor next-build slowdown)
cd "$ACTIVE_TARGET/debug" && rm -rf ./incremental

# cargo registry (re-fetched; keep index)
cd "$HOME/.cargo/registry" && rm -rf ./src ./cache

# pnpm + npm caches
pnpm store prune
npm cache clean --force

# idle project's node_modules (reinstallable)
cd /path/to/idle-project && rm -rf ./node_modules

For the big active cargo debug/deps, only offer cargo clean / deleting the whole target dir if the user accepts a full cold rebuild — call out the tradeoff explicitly.

After purging, re-run a quick df -h / and re-measure the touched dirs so the reported total reflects reality.

Step 4 — Hand off the vhdx compaction (the step that frees C:)

This is the finale every run must end on. Pull the vhdx path from the scan output and give the user a ready-to-paste block for a Windows PowerShell terminal (not WSL):

wsl --shutdown
# Easiest (modern WSL — also keeps it sparse going forward):
wsl --manage <DistroName> --set-sparse true    # DistroName from: wsl -l -v

# …or a reliable one-time compaction via diskpart:
diskpart
  select vdisk file="C:\Users\<you>\AppData\Local\wsl\{GUID}\ext4.vhdx"
  attach vdisk readonly
  compact vdisk
  detach vdisk
  exit

Set expectations honestly: compaction reclaims only the free blocks inside the filesystem (i.e. roughly what was just purged), so the vhdx — and C: usage — stays about as large as the real data still inside WSL. State the rough before/after C: free numbers from the scan so the user knows what to expect.

If the scan could not find the vhdx, have the user locate it on Windows with Get-ChildItem -Recurse $env:LOCALAPPDATA -Filter ext4.vhdx.

Bonus — stale Codex processes (EMFILE / inotify exhaustion)

Not a disk problem, but the same "WSL slowly rots" family: orphaned codex plugin brokers pile up (~3 processes each) and each eats inotify instances; at fs.inotify.max_user_instances=128 Vite starts failing with EMFILE. Sweep them:

node $HOME/.claude/scripts/codex-sweep.js

(A SessionStart hook runs this automatically once per 6h; the manual run is for when EMFILE already struck. See /codex-sweep for details.)

Belt and braces — raise the ceiling so accumulation between sweeps can't bite:

echo 'fs.inotify.max_user_instances=1024' | sudo tee /etc/sysctl.d/60-inotify.conf
sudo sysctl --system

Notes

• Self-hosted CI runners sometimes show up as large dirs. Their _work/ is

  ephemeral CI workspace (safe to clear when idle); fully removing a runner means stopping + uninstalling its root-owned systemd service first (sudo ./svc.sh stop && sudo ./svc.sh uninstall), which needs the user's sudo password — hand them those commands rather than guessing.

• This skill assumes WSL2. On a non-WSL host the scan still reports reclaimable

  caches, but the vhdx/compaction step does not apply — the script flags this.