Dev Scaffold Wt Dev

Scaffold worktree-development setup (wt-dev)

Install the repo-scoped pieces that make /x-wt-teams reliable:

• lefthook manages pre-commit hooks via lefthook.yml (lint-staged wired in only if the repo already uses it)
• A direct pre-push guard in .git/hooks/pre-push blocks pushes from worktrees — deliberately NOT in lefthook.yml because lefthook reads config from the worktree's toplevel and would silently skip the guard when invoked from inside a worktree
• scripts/install-git-hooks.sh installs the pre-push guard idempotently; wired into prepare and init-worktree
• Root CLAUDE.md section documents the policy for agents

All four pieces are tightly coupled — install all of them, not a subset.

Workflow

Step 1: Pre-flight checks

Run from the target repo root:

git rev-parse --show-toplevel >/dev/null 2>&1 || { echo "Not a git repo"; exit 1; }
ls package.json 2>/dev/null
ls .git/hooks/pre-push 2>/dev/null
grep -q "^worktrees/" .gitignore 2>/dev/null && echo "(worktrees/ already gitignored)"
ls lefthook.yml 2>/dev/null && echo "(lefthook.yml already exists)"
cat package.json | python3 -c "import json,sys; p=json.load(sys.stdin); print(p.get('scripts',{}).get('prepare','(no prepare)'))"

Decide:

• No package.json: the prepare lifecycle hook doesn't apply. Install lefthook globally or document manual steps. Continue with the scaffold but skip Step 4.
• Pre-existing .git/hooks/pre-push without our marker: tell the user; if they confirm, move it aside (mv .git/hooks/pre-push .git/hooks/pre-push.bak) before running the installer.
• core.hooksPath is set (e.g. to .husky/_): must be unset first. Edit .git/config to remove the hooksPath line under [core]. Without this, neither lefthook's hooks nor the pre-push guard will fire.
• lefthook.yml already exists: merge the pre-commit block into it rather than overwriting (Step 3).
• worktrees/ not in .gitignore: add it as part of Step 5.

Step 2: Copy the scripts

Copy these two files from the skill assets to the target repo. Preserve executable bits.

SKILL_DIR="$HOME/.claude/skills/dev-scaffold-wt-dev"
mkdir -p scripts/hooks
cp "$SKILL_DIR/assets/scripts/hooks/pre-push" scripts/hooks/pre-push
cp "$SKILL_DIR/assets/scripts/install-git-hooks.sh" scripts/install-git-hooks.sh
chmod +x scripts/hooks/pre-push scripts/install-git-hooks.sh

Both files are repo-agnostic — no patching needed.

Step 3: Create or update lefthook.yml

First, detect whether this repo already uses lint-staged. Any of these is a signal that lint-staged is configured:

# Config files at the repo root
ls .lintstagedrc .lintstagedrc.{js,cjs,mjs,json,yaml,yml} lint-staged.config.{js,cjs,mjs} 2>/dev/null
# Top-level "lint-staged" key OR lint-staged listed as a (dev)dependency in package.json
[ -f package.json ] && python3 -c "import json; p=json.load(open('package.json')); print('yes' if 'lint-staged' in p or 'lint-staged' in (p.get('dependencies') or {}) or 'lint-staged' in (p.get('devDependencies') or {}) else 'no')"

If lint-staged is configured — create lefthook.yml with the lint-staged command:

pre-commit:
  commands:
    lint-staged:
      run: pnpm dlx lint-staged

If lint-staged is NOT configured (the common case for new repos) — create lefthook.yml with an empty slot. Do NOT default-include lint-staged: pnpm dlx lint-staged; without a config it fails every commit:

# lefthook manages pre-commit hooks here. Add commands under
# `pre-commit.commands` when this repo needs them, e.g. lint-staged.
#
# The pre-push worktree guard is intentionally NOT managed by lefthook —
# it lives in scripts/hooks/pre-push and is installed directly to
# .git/hooks/pre-push by scripts/install-git-hooks.sh (run by `pnpm install`
# via the `prepare` script). See CLAUDE.md "Worktree push policy" for the
# rationale.

pre-commit:
  commands: {}

If lefthook.yml already exists, leave its existing pre-commit block alone (do not overwrite, do not inject lint-staged). Add a pre-commit block only if one isn't there. Do NOT add a pre-push block — the guard runs outside lefthook for the reason stated above.

Step 4: Detect the package manager

For repos with package.json:

[ -f pnpm-lock.yaml ] && PM=pnpm
[ -f package-lock.json ] && PM=npm
[ -f yarn.lock ] && PM=yarn
[ -f bun.lockb ] && PM=bun
PM=${PM:-pnpm}

Set:

• INSTALL_COMMAND → ${PM} install
• INIT_WORKTREE_COMMAND → ${PM} run init-worktree (npm/yarn/bun) or pnpm init-worktree (pnpm shorthand)

Step 5: Wire package.json scripts (skip if no package.json)

Add two scripts. Use the Edit tool — preserve key order, do not rewrite the whole file:

{
  "scripts": {
    "prepare": "lefthook install && bash scripts/install-git-hooks.sh",
    "init-worktree": "bash scripts/install-git-hooks.sh"
  }
}

If the repo already has a prepare script:

• pnpm dlx husky (Husky): replace it entirely (migrate to lefthook). Remove .husky/ directory. Tell the user.
• Any other value: prepend with &&: "prepare": "<existing> && lefthook install && bash scripts/install-git-hooks.sh". Tell the user.

Step 6: Install lefthook as a dev dependency (skip if no package.json)

# pnpm
pnpm add -Dw lefthook

# npm
npm install -D lefthook

# yarn
yarn add -D lefthook

Step 7: Add or extend root CLAUDE.md

Read $HOME/.claude/skills/dev-scaffold-wt-dev/assets/claude-md-section.md. Substitute the placeholders:

• <INSTALL_COMMAND> → from Step 4
• <INIT_WORKTREE_COMMAND> → from Step 4

Then:

• No CLAUDE.md at repo root: create it. Add a one-line top heading (# <repo-name> — repo rules) before the worktree section.
• CLAUDE.md exists but has no worktree section (grep for Worktree push policy): append the section to the end with a blank line before it.
• Worktree section already present: report idempotently — "CLAUDE.md already has the worktree policy section; skipping." — and do not duplicate.

Also add worktrees/ to .gitignore if not already present:

grep -q "^worktrees/" .gitignore 2>/dev/null || echo "worktrees/" >> .gitignore

Step 8: Run the installer and verify

bash scripts/install-git-hooks.sh

Expected: install-git-hooks: installed <path>/.git/hooks/pre-push.

Verify the guard works. Create a throwaway worktree, attempt a push, confirm it's blocked, then clean up:

git worktree add worktrees/_pushguard-poc -b _pushguard-poc 2>&1 | tail -2
cd worktrees/_pushguard-poc
git commit --allow-empty -m "test"
git push origin _pushguard-poc 2>&1 | head -5
# Expected: 'Push blocked — you are in a /x-wt-teams worktree.' and exit non-zero.
cd ../..
git worktree prune
git branch -D _pushguard-poc

If the push isn't blocked, diagnose:

• .git/hooks/pre-push exists and is executable?
• core.hooksPath is unset (check cat .git/config | grep hooksPath)?
• git rev-parse --git-dir and --git-common-dir differ inside the worktree?

Step 9: Report

Tell the user concisely:

• Files touched: scripts/install-git-hooks.sh, scripts/hooks/pre-push, lefthook.yml, package.json (if applicable), root CLAUDE.md, .gitignore.
• That the verification worktree push was blocked as expected.
• That nothing was committed — they should git add and commit when they're ready.

Idempotency

Re-running this skill on a repo that already has it scaffolded is safe:

• cp overwrites script files with identical content (no diff on first re-run; pulls updates if the skill has been updated upstream).
• package.json changes are idempotent — Edit tool will be a no-op if the keys are already present with the right values.
• CLAUDE.md detection (Step 7) skips when the section is already present.
• The installer is idempotent.

When NOT to use this skill

• The repo doesn't use /x-wt-teams at all. The hook is harmless but the CLAUDE.md section talks about a workflow that's not in play.
• The repo has a non-standard worktrees/ layout (e.g., worktrees elsewhere on disk). The hook's detection uses GIT_DIR != GIT_COMMON_DIR (any linked worktree), so path naming doesn't matter for detection — but the CLAUDE.md section references worktrees/ as the convention.