Telnyx Numbers Services Java

Telnyx Numbers Services - Java

Installation

<!-- Maven -->
<dependency>
    <groupId>com.telnyx.sdk</groupId>
    <artifactId>telnyx</artifactId>
    <version>6.89.0</version>
</dependency>

// Gradle
implementation("com.telnyx.sdk:telnyx:6.89.0")

Setup

import com.telnyx.sdk.client.TelnyxClient;
import com.telnyx.sdk.client.okhttp.TelnyxOkHttpClient;

TelnyxClient client = TelnyxOkHttpClient.fromEnv();

All examples below assume client is already initialized as shown above.

Error Handling

All API calls can fail with network errors, rate limits (429), validation errors (422), or authentication errors (401). Always handle errors in production code:

import com.telnyx.sdk.errors.TelnyxServiceException;

try {
    var result = client.messages().send(params);
} catch (TelnyxServiceException e) {
    System.err.println("API error " + e.statusCode() + ": " + e.getMessage());
    if (e.statusCode() == 422) {
        System.err.println("Validation error — check required fields and formats");
    } else if (e.statusCode() == 429) {
        // Rate limited — wait and retry with exponential backoff
        Thread.sleep(1000);
    }
}

Common error codes: 401 invalid API key, 403 insufficient permissions, 404 resource not found, 422 validation error (check field formats), 429 rate limited (retry with exponential backoff).

Important Notes

• Pagination: List methods return a page. Use .autoPager() for automatic iteration: for (var item : page.autoPager()) { ... }. For manual control, use .hasNextPage() and .nextPage().

List your voice channels for non-US zones

Returns the non-US voice channels for your account. voice channels allow you to use Channel Billing for calls to your Telnyx phone numbers. Please check the Telnyx Support Articles section for full information and examples of how to utilize Channel Billing.

GET /channel_zones

import com.telnyx.sdk.models.channelzones.ChannelZoneListPage;
import com.telnyx.sdk.models.channelzones.ChannelZoneListParams;

ChannelZoneListPage page = client.channelZones().list();

Returns: channels (int64), countries (array[string]), created_at (string), id (string), name (string), record_type (enum: channel_zone), updated_at (string)

Update voice channels for non-US Zones

Update the number of Voice Channels for the Non-US Zones. This allows your account to handle multiple simultaneous inbound calls to Non-US numbers. Use this endpoint to increase or decrease your capacity based on expected call volume.

PUT /channel_zones/{channel_zone_id} — Required: channels

import com.telnyx.sdk.models.channelzones.ChannelZoneUpdateParams;
import com.telnyx.sdk.models.channelzones.ChannelZoneUpdateResponse;

ChannelZoneUpdateParams params = ChannelZoneUpdateParams.builder()
    .channelZoneId("550e8400-e29b-41d4-a716-446655440000")
    .channels(0L)
    .build();
ChannelZoneUpdateResponse channelZone = client.channelZones().update(params);

Returns: channels (int64), countries (array[string]), created_at (string), id (string), name (string), record_type (enum: channel_zone), updated_at (string)

List dynamic emergency addresses

Returns the dynamic emergency addresses according to filters

GET /dynamic_emergency_addresses

import com.telnyx.sdk.models.dynamicemergencyaddresses.DynamicEmergencyAddressListPage;
import com.telnyx.sdk.models.dynamicemergencyaddresses.DynamicEmergencyAddressListParams;

DynamicEmergencyAddressListPage page = client.dynamicEmergencyAddresses().list();

Returns: administrative_area (string), country_code (enum: US, CA, PR), created_at (string), extended_address (string), house_number (string), house_suffix (string), id (string), locality (string), postal_code (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_name (string), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

Create a dynamic emergency address.

Creates a dynamic emergency address.

POST /dynamic_emergency_addresses — Required: house_number, street_name, locality, administrative_area, postal_code, country_code

Optional: created_at (string), extended_address (string), house_suffix (string), id (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

import com.telnyx.sdk.models.dynamicemergencyaddresses.DynamicEmergencyAddress;
import com.telnyx.sdk.models.dynamicemergencyaddresses.DynamicEmergencyAddressCreateResponse;

DynamicEmergencyAddress params = DynamicEmergencyAddress.builder()
    .administrativeArea("TX")
    .countryCode(DynamicEmergencyAddress.CountryCode.US)
    .houseNumber("600")
    .locality("Austin")
    .postalCode("78701")
    .streetName("Congress")
    .build();
DynamicEmergencyAddressCreateResponse dynamicEmergencyAddress = client.dynamicEmergencyAddresses().create(params);

Returns: administrative_area (string), country_code (enum: US, CA, PR), created_at (string), extended_address (string), house_number (string), house_suffix (string), id (string), locality (string), postal_code (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_name (string), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

Get a dynamic emergency address

Returns the dynamic emergency address based on the ID provided

GET /dynamic_emergency_addresses/{id}

import com.telnyx.sdk.models.dynamicemergencyaddresses.DynamicEmergencyAddressRetrieveParams;
import com.telnyx.sdk.models.dynamicemergencyaddresses.DynamicEmergencyAddressRetrieveResponse;

DynamicEmergencyAddressRetrieveResponse dynamicEmergencyAddress = client.dynamicEmergencyAddresses().retrieve("182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e");

Returns: administrative_area (string), country_code (enum: US, CA, PR), created_at (string), extended_address (string), house_number (string), house_suffix (string), id (string), locality (string), postal_code (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_name (string), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

Delete a dynamic emergency address

Deletes the dynamic emergency address based on the ID provided

DELETE /dynamic_emergency_addresses/{id}

import com.telnyx.sdk.models.dynamicemergencyaddresses.DynamicEmergencyAddressDeleteParams;
import com.telnyx.sdk.models.dynamicemergencyaddresses.DynamicEmergencyAddressDeleteResponse;

DynamicEmergencyAddressDeleteResponse dynamicEmergencyAddress = client.dynamicEmergencyAddresses().delete("182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e");

Returns: administrative_area (string), country_code (enum: US, CA, PR), created_at (string), extended_address (string), house_number (string), house_suffix (string), id (string), locality (string), postal_code (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_name (string), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

List dynamic emergency endpoints

Returns the dynamic emergency endpoints according to filters

GET /dynamic_emergency_endpoints

import com.telnyx.sdk.models.dynamicemergencyendpoints.DynamicEmergencyEndpointListPage;
import com.telnyx.sdk.models.dynamicemergencyendpoints.DynamicEmergencyEndpointListParams;

DynamicEmergencyEndpointListPage page = client.dynamicEmergencyEndpoints().list();

Returns: callback_number (string), caller_name (string), created_at (string), dynamic_emergency_address_id (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

Create a dynamic emergency endpoint.

Creates a dynamic emergency endpoints.

POST /dynamic_emergency_endpoints — Required: dynamic_emergency_address_id, callback_number, caller_name

Optional: created_at (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

import com.telnyx.sdk.models.dynamicemergencyendpoints.DynamicEmergencyEndpoint;
import com.telnyx.sdk.models.dynamicemergencyendpoints.DynamicEmergencyEndpointCreateResponse;

DynamicEmergencyEndpoint params = DynamicEmergencyEndpoint.builder()
    .callbackNumber("+13125550000")
    .callerName("Jane Doe Desk Phone")
    .dynamicEmergencyAddressId("0ccc7b54-4df3-4bca-a65a-3da1ecc777f0")
    .build();
DynamicEmergencyEndpointCreateResponse dynamicEmergencyEndpoint = client.dynamicEmergencyEndpoints().create(params);

Returns: callback_number (string), caller_name (string), created_at (string), dynamic_emergency_address_id (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

Get a dynamic emergency endpoint

Returns the dynamic emergency endpoint based on the ID provided

GET /dynamic_emergency_endpoints/{id}

import com.telnyx.sdk.models.dynamicemergencyendpoints.DynamicEmergencyEndpointRetrieveParams;
import com.telnyx.sdk.models.dynamicemergencyendpoints.DynamicEmergencyEndpointRetrieveResponse;

DynamicEmergencyEndpointRetrieveResponse dynamicEmergencyEndpoint = client.dynamicEmergencyEndpoints().retrieve("182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e");

Returns: callback_number (string), caller_name (string), created_at (string), dynamic_emergency_address_id (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

Delete a dynamic emergency endpoint

Deletes the dynamic emergency endpoint based on the ID provided

DELETE /dynamic_emergency_endpoints/{id}

import com.telnyx.sdk.models.dynamicemergencyendpoints.DynamicEmergencyEndpointDeleteParams;
import com.telnyx.sdk.models.dynamicemergencyendpoints.DynamicEmergencyEndpointDeleteResponse;

DynamicEmergencyEndpointDeleteResponse dynamicEmergencyEndpoint = client.dynamicEmergencyEndpoints().delete("182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e");

Returns: callback_number (string), caller_name (string), created_at (string), dynamic_emergency_address_id (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

List your voice channels for US Zone

Returns the US Zone voice channels for your account. voice channels allows you to use Channel Billing for calls to your Telnyx phone numbers. Please check the Telnyx Support Articles section for full information and examples of how to utilize Channel Billing.

GET /inbound_channels

import com.telnyx.sdk.models.inboundchannels.InboundChannelListParams;
import com.telnyx.sdk.models.inboundchannels.InboundChannelListResponse;

InboundChannelListResponse inboundChannels = client.inboundChannels().list();

Returns: channels (integer), record_type (string)

Update voice channels for US Zone

Update the number of Voice Channels for the US Zone. This allows your account to handle multiple simultaneous inbound calls to US numbers. Use this endpoint to increase or decrease your capacity based on expected call volume.

PATCH /inbound_channels — Required: channels

import com.telnyx.sdk.models.inboundchannels.InboundChannelUpdateParams;
import com.telnyx.sdk.models.inboundchannels.InboundChannelUpdateResponse;

InboundChannelUpdateParams params = InboundChannelUpdateParams.builder()
    .channels(7L)
    .build();
InboundChannelUpdateResponse inboundChannel = client.inboundChannels().update(params);

Returns: channels (integer), record_type (string)

List All Numbers using Channel Billing

Retrieve a list of all phone numbers using Channel Billing, grouped by Zone.

GET /list

import com.telnyx.sdk.models.list.ListRetrieveAllParams;
import com.telnyx.sdk.models.list.ListRetrieveAllResponse;

ListRetrieveAllResponse response = client.list().retrieveAll();

Returns: number_of_channels (integer), numbers (array[object]), zone_id (string), zone_name (string)

List Numbers using Channel Billing for a specific Zone

Retrieve a list of phone numbers using Channel Billing for a specific Zone.

GET /list/{channel_zone_id}

import com.telnyx.sdk.models.list.ListRetrieveByZoneParams;
import com.telnyx.sdk.models.list.ListRetrieveByZoneResponse;

ListRetrieveByZoneResponse response = client.list().retrieveByZone("550e8400-e29b-41d4-a716-446655440000");

Returns: number_of_channels (integer), numbers (array[object]), zone_id (string), zone_name (string)

Get voicemail

Returns the voicemail settings for a phone number

GET /phone_numbers/{phone_number_id}/voicemail

import com.telnyx.sdk.models.phonenumbers.voicemail.VoicemailRetrieveParams;
import com.telnyx.sdk.models.phonenumbers.voicemail.VoicemailRetrieveResponse;

VoicemailRetrieveResponse voicemail = client.phoneNumbers().voicemail().retrieve("123455678900");

Returns: enabled (boolean), pin (string)

Create voicemail

Create voicemail settings for a phone number

POST /phone_numbers/{phone_number_id}/voicemail

Optional: enabled (boolean), pin (string)

import com.telnyx.sdk.models.phonenumbers.voicemail.VoicemailCreateParams;
import com.telnyx.sdk.models.phonenumbers.voicemail.VoicemailCreateResponse;
import com.telnyx.sdk.models.phonenumbers.voicemail.VoicemailRequest;

VoicemailCreateParams params = VoicemailCreateParams.builder()
    .phoneNumberId("123455678900")
    .voicemailRequest(VoicemailRequest.builder().build())
    .build();
VoicemailCreateResponse voicemail = client.phoneNumbers().voicemail().create(params);

Returns: enabled (boolean), pin (string)

Update voicemail

Update voicemail settings for a phone number

PATCH /phone_numbers/{phone_number_id}/voicemail

Optional: enabled (boolean), pin (string)

import com.telnyx.sdk.models.phonenumbers.voicemail.VoicemailRequest;
import com.telnyx.sdk.models.phonenumbers.voicemail.VoicemailUpdateParams;
import com.telnyx.sdk.models.phonenumbers.voicemail.VoicemailUpdateResponse;

VoicemailUpdateParams params = VoicemailUpdateParams.builder()
    .phoneNumberId("123455678900")
    .voicemailRequest(VoicemailRequest.builder().build())
    .build();
VoicemailUpdateResponse voicemail = client.phoneNumbers().voicemail().update(params);

Returns: enabled (boolean), pin (string)